+Maybe a mod party at Cheerios' place someday
Yeah, we totally need to schedule something. My yard is also big enough for a war if we want to do that as well.
cheerios's Content
There have been 224 items by cheerios (Search limited from 13-February 97)
#289382 Illinois Foam Fest 4
Posted by
on 29 November 2010 - 03:53 PM
in
Nerf Wars
Yeah, we totally need to schedule something. My yard is also big enough for a war if we want to do that as well.
#281086 Illinois Foam Fest 4
Posted by
on 23 July 2010 - 09:18 PM
in
Nerf Wars
I'll be there.
And noodle ILFF2 was "still creepy".
I'll help host if you want me to.
And noodle ILFF2 was "still creepy".
I'll help host if you want me to.
#288965 Illinois Foam Fest 4
Posted by
on 26 November 2010 - 03:40 PM
in
Nerf Wars
All my hoppers are making marshmallows double, triple, and quadruple feed anyone have a fix for that?
#278784 Illinois Foam Fest 3
Posted by
on 27 June 2010 - 10:38 PM
in
Nerf Wars
All ready? It hasn't even been a day. I don't know if I'll be there stupid school starts that week after.
#281540 Illinois Foam Fest 3
Posted by
on 28 July 2010 - 09:29 PM
in
Nerf Wars
Hey, I probably won't be able to attend now. It's like a 10% chance.
#281701 Illinois Foam Fest 3
Posted by
on 31 July 2010 - 07:22 AM
in
Nerf Wars
Yo is it raining near you noodle?
#280107 Illinois Foam Fest 3
Posted by
on 12 July 2010 - 10:25 PM
in
Nerf Wars
Jesus, this is turning out to have good attendance.
#275958 Illinois Foam Fest 2
Posted by
on 25 May 2010 - 06:43 PM
in
Nerf Wars
I'll be there. I would prefer a different location though, that park takes me an hour and a half to get there which is pretty ridiculous for a war that would have pretty low attendance.
#277643 Illinois Foam Fest 2
Posted by
on 13 June 2010 - 08:37 PM
in
Nerf Wars
Hey Noodle put down a guest of mine as a maybe. Also if anyone will need a loaner primary message me I will have some.
#278220 Illinois Foam Fest 2
Posted by
on 21 June 2010 - 05:15 PM
in
Nerf Wars
Noodle I'm gonna kick ass!
#278642 Illinois Foam Fest 2
Posted by
on 26 June 2010 - 08:27 PM
in
Nerf Wars
pros[b]
Getting a ball kill.
Nothing breaking majorly.
Getting free foam.
Getting a free homemade.
Cons!!!!
Snake talking about my sister.
Snake in general.
Snake talking about my sister even more.
A little muddy
Not enough game-play, noodle you need to step it up.
Hot!
and did I mention snake?
"Still creepy!"
Getting a ball kill.
Nothing breaking majorly.
Getting free foam.
Getting a free homemade.
Cons!!!!
Snake talking about my sister.
Snake in general.
Snake talking about my sister even more.
A little muddy
Not enough game-play, noodle you need to step it up.
Hot!
and did I mention snake?
"Still creepy!"
#275523 Illinois Foam Fest
Posted by
on 21 May 2010 - 08:55 PM
in
Nerf Wars
Ryan or Kane bring the AT8000.
#275548 Illinois Foam Fest
Posted by
on 22 May 2010 - 07:53 AM
in
Nerf Wars
Leaving now see all you guys on the field.
#274983 Illinois Foam Fest
Posted by
on 16 May 2010 - 08:28 PM
in
Nerf Wars
The war is one week away, and there are still quite a few "maybes".
Bobbo + x
yBrik + xDemon Lord
Please confirm your attendance. Also, we will have a pistols round, so bring one.
I am a definete, and thank you for adding in a pistol round. If anyone needs to borrow one I will have an extra.
#273179 Illinois Foam Fest
Posted by
on 24 April 2010 - 03:56 PM
in
Nerf Wars
Sorry noodle I can't make it in such short notice.
#283681 Hvz Next Gun
Posted by
on 21 August 2010 - 05:07 PM
in
General Nerf
If your doing HVZ get a raider, the drum mags come in handy. Also like gears said a spartan and a tacticool vest would be another very good combo.
#331517 How to fix torn Magstrike air-bladder
Posted by
on 03 July 2013 - 08:49 AM
in
Modifications
I have a stock magstrike that I can gut for the bladder if you want to buy it. Replacing the bladder at this point is your best option.
#342497 Hoppered Magstrike
Posted by
on 19 October 2014 - 02:28 PM
in
Modifications
3. For airguns you typically want a loose fit. What material ultimately depends on your specific foam, but petg or 9/16" brass would probably work well for you.
Tue, but the Magstrike doesn't work like an air gun, it works more like a springer with its piston mechanism.
#291267 Hopper Clip For Stock Tagger Darts
Posted by
on 20 December 2010 - 10:46 PM
in
Darts and Barrels
Nice to see you found a use for the 45 degree bends. Can't wait to see an improved version.
#286914 Homemades Picture Thread
Posted by
on 13 October 2010 - 04:02 PM
in
Homemades
OMG Pacbows!
Mr. Mcnumbers pacbow on the left and the ghetto Pacbow mad by me on the right.
If your going to buy a homemade gun buy a PAC from ryan.
Mr. Mcnumbers pacbow on the left and the ghetto Pacbow mad by me on the right.
If your going to buy a homemade gun buy a PAC from ryan.
#327508 Homemades Picture Thread
Posted by
on 02 March 2013 - 11:39 PM
in
Homemades
Zorn's FAL 2 became my FAL 2. The plunger tube exploded so I had to fix that and reinforce the priming handle.
#330438 Homemades Picture Thread
Posted by
on 31 May 2013 - 09:22 PM
in
Homemades
#326288 Homemades Picture Thread
Posted by
on 03 February 2013 - 06:01 PM
in
Homemades
Finally the best shell ever is getting the TLC that it has always deserved. It is the most comfortable shell and it fits a 2.25" plunger tube perfectly with 5" of draw.
It shoots as far as Ryan's plusbow. Shoots through cardboard with slugs but not with AMIORS or silicone domes.
It shoots as far as Ryan's plusbow. Shoots through cardboard with slugs but not with AMIORS or silicone domes.
#317630 Homemades Picture Thread
Posted by
on 27 June 2012 - 10:06 PM
in
Homemades
I got some shit done recently.
Built this snap variant of the rainbowpup a couple days after Ryan made his. It shoots 90-95' with a less than optimal seal.
I upgraded my rainbowpump rev. 1 into a rev 2. It uses rubber grommets to make it dry fireable and uses a beaver omni directional catch.
I made this in an attempt to make a super short gun, It's as short as a maxshot.
Also for those who didn't see Louie being super butt hurt on Nrev, this is my entrance blaster for his bull-pup contest it is directly based off of his revshot carbine design.
It is nicknamed "Butt Hurt?"
It shoots 90' consistently.
Built this snap variant of the rainbowpup a couple days after Ryan made his. It shoots 90-95' with a less than optimal seal.
I upgraded my rainbowpump rev. 1 into a rev 2. It uses rubber grommets to make it dry fireable and uses a beaver omni directional catch.
I made this in an attempt to make a super short gun, It's as short as a maxshot.
Also for those who didn't see Louie being super butt hurt on Nrev, this is my entrance blaster for his bull-pup contest it is directly based off of his revshot carbine design.
It is nicknamed "Butt Hurt?"
It shoots 90' consistently.
#334038 Homemades Picture Thread
Posted by
on 15 September 2013 - 07:06 PM
in
Homemades
I performed some maintenance on Zorn's FAL 2 this weekend. It didn't way too much work, just the usual fixes for FAL 2s.
Pictured with the other blasters I've fixed that once belonged to Zorn.
I also finished up a new bullpup blaster that is a spring powered version of Kane's BullPACs; It is the same size and has a better name "BullShit".
Here it is with it's predecessor the "BullCrap"
- Replace the plunger tube with opaque PVC (clear PVC cracks easily)
- Fine tune the trigger. It actually catches now.
- Re-attached the handle with epoxy putty instead of hot glue an zip ties
- Filled unnecessary holes in the plunger tube and bushings.
- Made a new spacer to attach the priming handle to the plunger tube. The original was 1/2" long and the new one is 2.5" long.
Pictured with the other blasters I've fixed that once belonged to Zorn.
I also finished up a new bullpup blaster that is a spring powered version of Kane's BullPACs; It is the same size and has a better name "BullShit".
Here it is with it's predecessor the "BullCrap"
#335147 Help with a barrel for elite darts in my rainbow
Posted by
on 02 November 2013 - 06:06 PM
in
Darts and Barrels
The air vent hole on the side of the dart head is what causes Streamlines to spin out of control. They weigh more than regular slugs so they're plenty heavy, so weight isn't the issue. Streamlines and elites in general are pretty worthless in any blaster with more power than an elite blaster; just make some stefans if you are dead set on using your pump-snap.
#284823 Hell Before Halloween #4
Posted by
on 05 September 2010 - 07:08 AM
in
Nerf Wars
I might be able to make it, due to my dad going up there for a weekend business thing.
#250582 Happy Birthday Sluggy!
Posted by
on 16 September 2009 - 06:34 AM
in
Off Topic
Happy Birthday Captain Slug. Happy Birthday Sputnik.
#255070 Happy Birthday Forsaken_angel24!
Posted by
on 01 November 2009 - 12:48 PM
in
Off Topic
Happy Birthday, Angel!
#315520 Hamtch
Posted by
on 10 May 2012 - 05:48 PM
in
Homemades
In what way is the snap catch not durable?Other than that, it is just as comfortable to use as any other snap, and you get the benefit of a super-durable catch!
#290772 Guns Guns Guns!
Posted by
on 12 December 2010 - 09:35 PM
in
General Nerf
A rainbow pump from Ryan is one of the best investments you'll ever make (Nerf wise). You're never need a new primary.
#282060 Guide To Barrel Material
Posted by
on 04 August 2010 - 06:46 AM
in
Modifications
I think your talking about sched 80 PVC, It's the only Grey PVC I can think of.
#340675 Green Bay Nerfinz
Posted by
on 23 July 2014 - 11:35 PM
in
Nerf Wars
Pretty much anything after the 16th doesn't work for me. I would vote for the 9th if that is an option.
#302499 FOMAS 2.0
Posted by
on 29 July 2011 - 06:04 PM
in
Homemades
This looks like a giant pipe bomb. Maybe I overlooked it, but does this have an OPRV?
#339213 Failed attempt at silicone tip creation.
Posted by
on 28 May 2014 - 02:37 PM
in
Darts and Barrels
I very well may be contacting you about the mold, but my dart tips finally cured and I'm going to attempt later to get them out of the wooden mold and if its successful and not too messy then I may just continue using my own but were you talking $15 plus shipping or 15 shipped?
$15 plus shipping.
#331021 ESLT Blaster Build Guide
Posted by
on 18 June 2013 - 04:35 PM
in
Homemades
Just completed the handle. I was wondering if a 1/2" pvc coupler could be used to plug the wye instead of the 3/4" plug?
You would still have a hole in the wye with a coupler. Also the plugs are a more efficient method.
#337098 EAT Brass Breach Video Mod Guide
Posted by
on 17 February 2014 - 01:20 PM
in
Modifications
Not long to release now.
How long until these kits are for sale?
#248403 Dtb Help
Posted by
on 24 August 2009 - 02:38 PM
in
Modifications
Did you put in the white piece that stabalizes the turret? Thats what my problem was.
#335155 Directory of Homemade Nerf Gun Build Guides
Posted by
on 02 November 2013 - 09:29 PM
in
Homemades
Carbon has been pretty busy lately so I'm taking over the Directory for him. Please don't post in the thread. Here's the original directory thread by Carbon for posterity.
The Nerfhaven Homemade Directory is the repository of past completed projects of the Haven. Use it as a resource to see whats been accomplished before, to find new (or old) techniques, or to get inspiration for your next project. PM me if your homemade isn't in the directory or if certain links aren't working. PM Aeromech if your writeup doesn't appear here within a week of posting.
This post will be updated as new projects are added to the forum.
Helpful Threads for Building Homemade Blasters
Read the first three threads before building your first homemade.
General Reference Thread
So You Want To Build A Homemade?
Guide to Machining Plastics by Captain Slug
Guide to Solvent Welding Plastics
Just click the "show" button near the spoiler bar to see that version of the directory.
Administration Picks
Spoiler
Write-Ups
Spoiler
Sorted by Priming Styles
Spoiler
#294817 Dekalb Area War Of Nerf, July 23rd
Posted by
on 21 February 2011 - 11:03 AM
in
Nerf Wars
I know I'll be there. Would "slug type" be able to have 3/16" ball bearings as weight.
