- NerfHaven
- → PissBacon's Content
PissBacon's Content
There have been 174 items by PissBacon (Search limited from 04-January 97)
#39842 Clr Power Plumber
Posted by PissBacon on 26 October 2004 - 01:53 AM in General Nerf
#65428 Ram Help
Posted by PissBacon on 10 October 2005 - 02:43 AM in Off Topic
#55743 Litestep
Posted by PissBacon on 26 May 2005 - 10:35 PM in Off Topic
UPDATE: I have a sneaking suspicion that it has something to do with the "/litestep/personal/popup.rc" file, especially the first few code lines talking about default popups and allowing new popups. Still boggled nonetheless.
UPDATE: I've completely fixed the issue. Check out the end result; it is pretty nice
screenshot
#64242 New Topic To Get Away From The Sniper Topic!
Posted by PissBacon on 24 September 2005 - 02:31 AM in General Nerf
To make sure a barrel is straight, the method will really depend on what gun you are modding. For something like a blast bazooka with a long barrel, you can use a pendulum. Get a right angle to mark a line along the barrel stub; this will be a reference point, so it is important the line be straight so the barrel will be too. While the barrel/stub of the gun is facing the ground, attach the pendulum (probably tape) so that it runs along the marked line, physically touching it. I'm lucky enough to have a vice in my room, but use whatever is convenient to hold the gun in place while doing this alignment. To make sure it's lined up both left-right and foreward-backward, you need to see both if the string lines up with the line and if the string is parallel to the barrel stub.
The black lines are the gun, orange is the barrel/stub and pink is the pendulum.
Perspective is you looking at the gun while its stub points towards the ground.
Good ------------------- Bad --------------- Bad
Using paint images: just goes to show how inarticulate I am.
It really depends on the gun; on some guns you can use decorations that go across the gun lengthwise that are clearly parallel to the barrel instead of using a right angle. After you have the pendulum where you want it, just put the barrel in the stub, making sure it lines up with the pendulum, and glue.
#33726 Problems With Screws On Titan
Posted by PissBacon on 11 August 2004 - 12:09 AM in Modifications
#51790 Grrr At My Jeans.
Posted by PissBacon on 06 April 2005 - 10:08 PM in Off Topic
Does that happen when you get your pants wet?
There are a few things to consider about your jeans. First of all, some brands just do that. Secondly, if they're new, give them a few washes, including inside out washing. Other things you could try are avoiding contact of jeans to shoes by some strange method like tape on the inside of jeans or rubber band. Also, sometimes using water proofing products on your shoes will prevent stains from attaching. If all else fails (or it's not worth the trouble), just avoid wearing that combonation.
#64251 Buyin A Rf20/nite Finder
Posted by PissBacon on 24 September 2005 - 10:43 AM in General Nerf
#79228 Guns Releasing Air Without The Trigger Pulled
Posted by PissBacon on 08 April 2006 - 10:30 PM in General Nerf
#47600 How Do You Modify A Ss2?
Posted by PissBacon on 20 February 2005 - 01:39 AM in Modifications
#33503 Tech Target Mod
Posted by PissBacon on 08 August 2004 - 06:11 AM in Modifications
-Smaller barrel for 1/2 inch (homemade) darts, also slightly longer
-No air restrictor
-Stronger spring
Since I took photos after doing the mod, I'll only have certain views.
http://tinypic.com/1kbrc
This is the gun opened with the (aluminum) barrel already in.
http://tinypic.com/1kbr8
As you can see, the barrel comes apart easily from the main part of the gun.
http://tinypic.com/1kbqu
This is an important part of the barrel. It has to be cut neatly out so that air is allowed through easily, and should line up with the inserted barrel.
http://tinypic.com/1kbr6
Finished product left side.
http://tinypic.com/1kbqg
Finished product right side.
If the pictures won't load, it's because I dont have photobucket yet, so the geocities site might be over its limit.
This gun gets a pretty good range; I measured around 65 feet angled based on 3 test fires. I know other people have modded this gun, but I thought some looked kind of sloppy, so I made this one clean looking. The main issue i have with this gun is that it is noisy for being a small plunger-type gun. I can't figure any practical ways to make the noise quieter without reducing range.
#62953 Robot!
Posted by PissBacon on 03 September 2005 - 12:21 AM in General Nerf
PS: I've seen videos of those bipedal robots (on a much smaller scale of course) doing things like playing soccer with great agility and reaction, entirely autonomous; who knows if these are practical on a larger scale though.
#70183 Dremel
Posted by PissBacon on 31 December 2005 - 02:59 AM in General Nerf
#76100 Virginia Tech's Crazy Monitor
Posted by PissBacon on 13 March 2006 - 11:34 PM in Off Topic
#35249 Help With Wclp
Posted by PissBacon on 25 August 2004 - 11:27 PM in Modifications
#51803 Thinkgeek Gun- Something Familiar About This...
Posted by PissBacon on 06 April 2005 - 10:57 PM in Off Topic
#47601 Problems With The Secret Shot 2
Posted by PissBacon on 20 February 2005 - 01:43 AM in Modifications
#53378 Help With Modding An Rf20
Posted by PissBacon on 24 April 2005 - 05:42 PM in Modifications
As for the actual rice firing part, I would make some sort of hopper like paintball guns have to mount on top. You will probably want to single barrel the rf20 (sound crazy?). The rice would flow into a part of the barrel, and then the barrel will funnel to create higher pressure as the rice leaves the barrel. I don't know how far/accurate this rice needs to fly, so I could come up with a more efficient barrel design too if you like.
#64041 Strongarm
Posted by PissBacon on 21 September 2005 - 01:41 AM in Modifications
Forums are great but people need to realize that just because someone owns a Nerf gun they're not going to automatically be participants on that forum community. With all due respect to the tire iron crowd, they've been around longer so they've gotten grumpier with seeing the same questions over and over again, and the same posts over and over again. The problem is when they express that grumpiness they turn off newcomers.
I don't necessarily agree with either side of the argument about 'n00bz', but it certainly leads to a lot of hard feelings ('tire iron').
#83918 Xp220
Posted by PissBacon on 28 June 2006 - 07:35 AM in Modifications
On a side note, I'm posting from Japan. Woot!
#84027 Xp220
Posted by PissBacon on 30 June 2006 - 03:01 AM in Modifications
After looking at pictures of the XP220 I realized that I've modded one before, though the results were very disappointing. It had to do with the trigger/valve which didn't open fast enough to let all the air out quickly. It's a squirt gun after all; it's supposed to release the pressure over time.
#51999 Shit.
Posted by PissBacon on 08 April 2005 - 07:32 PM in Off Topic
Please try to skim over what you're posting before you post. To determine what's up with the drive, I would go into the control panel, and from there into the system. Click on the hardware tab, and click the device manager. Scroll through the list and when you find that cd drive, double click and see what it says. If it says it has a problem you can probably go from there, and if it says the device is working properly, you'll have to consider other factors, like the parts inside the drive.When I insert a dick, nothing happens.
#63895 Triple Pump Tubed At2k
Posted by PissBacon on 18 September 2005 - 11:52 PM in Modifications
With the two extra pumps is it really tough to pump, or does it just have reasonable resistance? Also, I'm not sure how you've attached the two other pumps to the gun, but I would wonder if it is sturdy enough without tons of fastening to withstand the extra force of 3 pumps being used.
#65628 Crayola'd Bbb
Posted by PissBacon on 12 October 2005 - 02:57 PM in Modifications
#86232 Cool Find
Posted by PissBacon on 01 August 2006 - 03:18 AM in General Nerf
#40433 Clip Friendly Dart
Posted by PissBacon on 01 November 2004 - 02:01 AM in General Nerf
#47603 Atomizer Slingshot Mod
Posted by PissBacon on 20 February 2005 - 01:45 AM in Modifications
#47677 Atomizer Slingshot Mod
Posted by PissBacon on 21 February 2005 - 02:40 AM in Modifications
#34934 Ipod's Dirty Secret
Posted by PissBacon on 23 August 2004 - 02:09 AM in Off Topic
Personally, I'm waiting for the PSP.
#64693 Post-mod Pics Of Ertl Blowdart Turret
Posted by PissBacon on 30 September 2005 - 07:41 PM in Modifications
It's also a pretty universal idea - something you could adapt to many guns.awesome idea
#49199 Nerf Roller Skates?
Posted by PissBacon on 09 March 2005 - 11:15 PM in General Nerf
#65007 Ipod Nano Article
Posted by PissBacon on 04 October 2005 - 03:50 AM in Off Topic
#52472 Stupid Gun Design
Posted by PissBacon on 14 April 2005 - 12:50 AM in General Nerf
#66196 Paper Darts?
Posted by PissBacon on 20 October 2005 - 09:14 PM in General Nerf
#52550 Nite Finder: Old Vs New
Posted by PissBacon on 15 April 2005 - 12:54 AM in General Nerf
#47679 Toy Fair In New York Next Week
Posted by PissBacon on 21 February 2005 - 03:01 AM in General Nerf
Which gun looks like a PC knockoff? I really can't wait for a new PC since I dont want to buy one off of somebody. Also the guns that appear to be smaller clip RF20s look like they have big potential, and with 2 to a pack it could be some great dual wielding.The other one sounds like a PC knockoff.
PS: Laser Tag
I know it's not nerf, but for people making homemade guns, it could be a nice shell.
#73111 3b
Posted by PissBacon on 14 February 2006 - 01:23 AM in General Nerf
- NerfHaven
- → PissBacon's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·