You will need
A small screwdriver
2 inch wide tube of some sort
(12 inches should give you about 5 extra balls.)
The first thing you need to do is look at the top of the slingshot. See that knobby like thing? That's what is keeping the balls from falling out normally. There is no need to cut this off though. If you look at the back of it, you will see a screw. Unscrew it and the knob will just fall off.
Now for the next step. Put the tube on top of the slingshot.(There is no need to make an angle on the tube) It shouldn't go over it or inside it. Now get tape. Use lots and lots and lots of tape to make it sturdy as possible.
Not done yet. The tube I had a convenient cap. If yours doesn't you could fashion yourself one, or another knobby like thing, or just use the one you unscrewed and put it there.
This mod increases the ROF a lot. This gun/slingshot still isn't very good at all. If it does happen to fall into your hands, I reccomend doing this. It also kinda makes it look like a sword...
I'll have pictures up later. Sorry, if it's hard to understand, I've never explained a mod before, just ask me and I will try to clear things up.
Edited by CTA then and now, 14 February 2005 - 08:51 PM.