Help With Modding An Rf20
Posted 24 April 2005 - 03:01 PM
"The moment you can no longer see the fun in running around like a little child is the moment you begin to die."
Roses are FF0000
Violets are 0000FF
ALL YOUR BASE ARE BELONG TO US
Posted 24 April 2005 - 05:42 PM
As for the actual rice firing part, I would make some sort of hopper like paintball guns have to mount on top. You will probably want to single barrel the rf20 (sound crazy?). The rice would flow into a part of the barrel, and then the barrel will funnel to create higher pressure as the rice leaves the barrel. I don't know how far/accurate this rice needs to fly, so I could come up with a more efficient barrel design too if you like.
Posted 24 April 2005 - 05:48 PM
"if anyone gives you shit about being a geek, just remind them that all their bases are belong to you." -Talio
Posted 24 April 2005 - 05:56 PM
Uh, I don't think he just wants to fire 20 grains of rice...
I am sorry; I don't think you can have rice as ammunition. First, every grain of rice is different, so there would be a horrible seal between the rice and the barrel. You would also have a hard time putting the rice into the barrel. You would have a hard time finding tubing that would have a small enough ID (Inner Diameter) to fit rice. Finally, as you said, there would be the problem of rice falling into the firing mechanism.
Open up the gun and open up that red turret, then cover the entire bottom part of the inside with mesh and cut the long poles off of the air restrictors. Those air restrictors are necessary because if you don't leave them in the air will go other places than the barrel.
Don't try increasing the piston pressure, it won't be useful.
The only thing now is how to make the rice not fall out of the front, mabye putting something there that comes out when the rice hits it?
Posted 02 May 2005 - 07:19 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users