- NerfHaven
- → ChiliPepperFender's Content
ChiliPepperFender's Content
There have been 353 items by ChiliPepperFender (Search limited from 11-February 97)
#146754 Hand Cannon
Posted by
ChiliPepperFender
on 24 March 2008 - 10:44 PM
in
Homemades
#151844 Problem Solved.
Posted by
ChiliPepperFender
on 18 April 2008 - 03:54 PM
in
Off Topic
#143898 Longshot 2k
Posted by
ChiliPepperFender
on 04 March 2008 - 07:55 PM
in
Modifications
The longshot has the original mods done to it which include Ar removed bbb spring added, and soon to come, The Inventor Guy's LS mod with it.
The first thing you want to do is cut of the bipod and the area near this:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/cutfrontofls.jpg)
Next gut out and sand down the front gun to the point that I did to the left.(This part took some time as there is alot to gut out. Be sure to do this to both sides of the gun) Although when puting in the air tank it is a bit tricky and may require some trial and error.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/frontgunguttingout.jpg)
After you've gutted the front gun out do your basic mods you would do to the AT2K. This includes Ar removed and new barrells ect.. Although I didn't plug the pump, I'm not sure if you should do this for this mod.
Anyway you need to shorten your pump and pump shaft so that they can fit in the gutted part of the front gun.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/shortenpumpingandtube.jpg)
After this drill a big enough hole in the part where you would pump the gun so that the rod from the front gun can fit in this.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/sliderinsideofpump.jpg)
Be sure to remove the goo guage.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/googaugeremoved.jpg)
If you already noticed and tried putting the part that cocks the front gun in through your pump and tried pumping, you would have noticed that it doesn't work too well. To fix this cut off the parts in the inside that stick out so that they are flush.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/cockercutprongsoff.jpg)
The next thing you want to do is shorten the front gun. From the size of the one on top to the size on bottom.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/internalsandwheretocutofffrontgun.jpg)
Now glue the pump shaft down in the gutted front gun, make sure that you have the maximum space so that it will pump with the least pumps and stays in when pumped!
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/goodinterals.jpg)
Also glue down the air tank, this may take trial and error for where you would want to put this.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/glueonairtaink.jpg)
Make sure that the air tank is symmetrical(sp?) for the barrells. The pump shaft doesn't need to be.
After you put together the front gun, you'll notice you can't put on the AT2K barrels, well cut a little bit of this part off to accomadate the barrells, then glue them on to one side of the gun.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/cutthisofftofitbarrel.jpg)
After this the top of the front gun isn't flush with the bottom of the longshot so cut off what is nessacary.
Before:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/cutsoflushwithls.jpg)
After
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/nowflushwithls.jpg)
For firing the AT2K unit attach fishing wire and a key ring and make holes so that the wire goes through the longshot. Make sure it doesn't get in the way of the clip though!
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/fishingwirefortrigger.jpg)
Now that this is flush you can add the barrells and super glue or hot glue or epoxy the rotating barrels on. Then glue each side to the longshot so that you can unscrew the longshot and still open it up.
Finished:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/finished.jpg)
I know that i used super glue to glue the gun on and I advise you to use epoxy or a much better stable glue to hold the gun.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/ls.jpg)
You are now done and in Angels words "one step closer to being deified" Although this isn't even close to the types of mods Angel does.
Thanks to the admins for validating me, I hope you enjoyed my write up!
Questions? Comments? Flames?
Also any suggestions from people who have done many write ups?
#163816 The Manta Star
Posted by
ChiliPepperFender
on 23 July 2008 - 01:55 AM
in
Modifications
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/manta3.jpg)
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/manta2.jpg)
The gun itself is a little less than 2 pounds, not heavy at all. On the right side, when seeing from the bottom, I put one BS barrel and the pump. The pump is on this side because I hold the gun with my right hand, making it easier to pump with it up by my arm, rather than it lower under my arm. The second barrel that would be fired is symetrical to the pump on the other side. The third barrel, symetrical to the 1st barrel. Just like imaseolman, I purposely did this. The first thing I did, actually, was to find out if the SMDTG trigger would be comfortable, which it is.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/manta1.jpg)
My thumb slides right on the detonator of the SMDTG and my other fingers barely touch it, if at all touch it. Well after perfectly installing the SMDTG/BS integration my next order of business was to fix the crooked AT2k barrel, which I did with epoxy putty while holding the barrel still. It's 100% straight but around 90%, plus it's the back up "gun" I use on the Manta. The tubing doesn't get in the way at all since my wrist slides under it. Since NerfCrazy and Falcon were giving me ideas for puting the trigger by my hand, I figuired I needed one there and having the SMDTG/BS worked out perfectly.
Ok, now the name? Well imaseolman named his original Arachnaphobia because he had 8 barrels and so do spiders, hence the name and being afraid of the gun/spiders. Well what animal/insect has 5 legs you ask? Well, none, unless something got amputated or a mutation but those don't count. A Starfish, which is a Echinoderm, has 5 "legs". My gun has 5 barrels, as well as a star has 5 ends or points.
Ranges:
I have no official ranges, it's almost midnight here. I'll get some tommarow. Based on my other guns and comparing them to it. I'd say both the AT2k's get around 70-90', with 5 pumps. The BS barrels probably get around 75' with 25 pumps. The pump I'm using is an AT2k pump. At 25 pumps it get's hard to pump. The great thing about the SMDTG/BS integrations is that you can pump it 25 times and fire off the first BS barrel. Then pump it maybe 5 more times and have the first barrel full again. Doing this really utilizes the integration. Getting to shoot one shot 75'+ while having 2 back up 75'+ shots is totally badass.
Questions, comments, flames?
#153184 Shopping Sites
Posted by
ChiliPepperFender
on 25 April 2008 - 11:05 PM
in
General Nerf
#148050 Ls Questions
Posted by
ChiliPepperFender
on 30 March 2008 - 11:19 AM
in
Modifications
To make a removable barrel, you just take out the LS front gun's orange fake barrel, and stick it in the LS's bolt tooth, and duct tape.
To make a carbine, look in the LS mod thread.
What the hell is a bolt tooth?
He probaly meant dart tooth. Anyways refer to Captain Slugs diagram
http://www.captainsl...ls_inside_3.jpg
#147641 Crossfire Catch Replacement
Posted by
ChiliPepperFender
on 28 March 2008 - 10:59 PM
in
Off Topic
#163876 The Manta Star
Posted by
ChiliPepperFender
on 23 July 2008 - 01:06 PM
in
Modifications
imaseolman: Thanks for the compliments. Yeah it is kinda hard to aim with the two key rings in the back. The top barrel not so much but the bottom barrel especially. Though my main gun I use is the first MS barrel and just "reload" that
I agree with you though, there are too many pumps. I was kinda forgot about the number of pumps when I was making it, also the bottom AT2K is hard to pump due to there being 3 barrels in the way. I like the gun anyways though. I may make changes later on though if I feel I need too.
#175579 Cutting Hoses
Posted by
ChiliPepperFender
on 07 September 2008 - 03:19 AM
in
Modifications
#146055 #49 Spring In Ace
Posted by
ChiliPepperFender
on 20 March 2008 - 10:37 PM
in
Modifications
#213208 Turreted Sm5k, Need Some Photos
Posted by
ChiliPepperFender
on 18 February 2009 - 01:18 AM
in
Modifications
#190396 Another Game Like N Strike
Posted by
ChiliPepperFender
on 17 November 2008 - 10:33 PM
in
General Nerf
Let me explane it a litle more clearly it has a blonde boy with a gun that looks like a maverick and the title is something and then soldier.
Great explanation there buddy.
#247253 Xbow + Lb + Ms
Posted by
ChiliPepperFender
on 16 August 2009 - 05:45 PM
in
Modifications
Here's what you need:
-Crossbow
-LB
-3 Salvo tanks
-SMDTB trigger
-6 Tubing connectors (really only need like 3, i'm just stupid)
-Pump of your choice
-Some PETG or something
-Glue, maybe?
Ok, so first make measurements by placing your LB basically on your Xbow to know where to cut. Then...cut?
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/xbowLB1.jpg)
Be sure to do it to both sides also.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/xbowLB2.jpg)
Now glue it all together wih the glue of your choice. Here's what the internals should look like. Really, pretty simple to do.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/xbowLB5.jpg)
Now, I was kinda bored. So I integrated something else as well. Get your pump tube and glue it where everyone else glues theirs. I used an SM1500 pump (I think) and a 2k pump.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/xbowLB6.jpg)
Now, connect the pump with your working Marvelous salvo. Then glue the barrels down wherever you want.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/xbowLB8.jpg)
Personally, I put the first two shooting ones on the left side, then the other on the right side.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/xbowLB7.jpg)
The pump tube turned out a little crooked facing downards, so I just put some foam under it, cause I'm cheap like that and don't use plexiglass/ polycarbonate.
If you don't know how to make the Marvelous salvo, then... go figuire it out? I made a guide somewhere on this forum.
I like the gun I made, I don't really care if you don't. Everything get's pretty normal ranges. Xbow around 90. MS around 60-80. LB around 50-80. It's a pretty kickass gun. LB takes 15 or less to fill. MS takes 30 to fill. Then 8 after you shoot the first one.
Step bro's:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/xbowlb9.jpg)
I don't think I'm forgetting anything, I probably am though. Ask questions if you want, or you can flame galore.
Oh yeah, btw thanks to Twitch for the idea to put the MS trigger where it is.
#247286 Xbow + Lb + Ms
Posted by
ChiliPepperFender
on 16 August 2009 - 08:18 PM
in
Modifications
Sweet, you coming to WALL or any upcoming WA state wars? I want to see this, I have a clusterfuck of a gun that similarly has a bajillion barrels.
I wanted to come to MM just didn't have a ride haha. I get my liscense in sept. so it'll be easier to get to the wars.
#156819 Re-styled Tek 10 Mod
Posted by
ChiliPepperFender
on 24 May 2008 - 01:25 PM
in
Modifications
Here's the gun stock:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone.jpg)
Before you start unscrewing all of the screws, get off the slider, keep these pieces:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone2.jpg)
Here are the internals of the gun:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone3.jpg)
All you need to take out is the turret here:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone4.jpg)
Here's the air restrictors:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone5.jpg)
In order to open the turret there's a screw at the top that you need to unscrew, next take a flat head screwdriver and pry it open carefully, don't force it:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone6.jpg)
This is the turret exploaded:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone7.jpg)
See all of those pegs? Sand and cut off them until it becomes smooth. Now add your barrel of choice. I chose PETG, and cut it 2 1/2 inches long. Next, glue them straight where the pegs used to be and the put the barrel assembly back together. Here's the turret now:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone9.jpg)
The final product:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzonedone.jpg)
This gun sucks, don't get it unless you find it for cheap. My ranges were around the 40's untill the cocking slider broke on me. Again, if anyone knows what this gun is called please tell! All it says on the gun is Air zone and Buzz Bee.
Any questions, comments, flames?
#156861 Re-styled Tek 10 Mod
Posted by
ChiliPepperFender
on 24 May 2008 - 10:24 PM
in
Modifications
Re-styled Tek 10? I'll change the title of the thread.
#156816 Vortex Tornado
Posted by
ChiliPepperFender
on 24 May 2008 - 01:14 PM
in
Modifications
The Vortex tornado is basically impossible to mod to fire darts, and I don't even really know how it fires the little rings either. Internal Pic.
That's the Firestorm not the tornado.
#151897 Recon Mods
Posted by
ChiliPepperFender
on 18 April 2008 - 07:59 PM
in
Site Feedback
#149540 Modding A Reactor...
Posted by
ChiliPepperFender
on 05 April 2008 - 07:41 PM
in
Modifications
I don't know if it is worth it though, the range isn't much.
#145826 Who Wants Free Stuff?
Posted by
ChiliPepperFender
on 19 March 2008 - 03:38 PM
in
Off Topic
#147972 O-ring Problem
Posted by
ChiliPepperFender
on 29 March 2008 - 11:00 PM
in
General Nerf
Thanks
#147999 O-ring Problem
Posted by
ChiliPepperFender
on 30 March 2008 - 12:24 AM
in
General Nerf
#148004 O-ring Problem
Posted by
ChiliPepperFender
on 30 March 2008 - 12:38 AM
in
General Nerf
#153836 Retro Thing
Posted by
ChiliPepperFender
on 29 April 2008 - 04:57 PM
in
Off Topic
It's like ye olden technology shoppe.
English please. Modern that is.
#146756 Double Tek
Posted by
ChiliPepperFender
on 24 March 2008 - 10:45 PM
in
Modifications
Good job!
#146767 Connecting Tubing
Posted by
ChiliPepperFender
on 24 March 2008 - 11:22 PM
in
Modifications
Sorry for the crappy pic:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/air.jpg)
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/air2.jpg)
Help is appreciated!
Thanks
I did try and search but I'm not exactly sure what to type in because this is a very vague question.
#209124 Maxblitz
Posted by
ChiliPepperFender
on 02 February 2009 - 10:53 PM
in
Modifications
Here's the gun, pretty simple:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/maxshot.jpg)
Basically just do everything like normal. Pump the LB while holding the handle of the LB and then pump. Prime the Maxshot the normal way. The LB also has a piece of velcro on the side of it. It's for a pencil that velcro's on to act as a thing to push the darts down the LB barrel. The barrels on both guns are solid, as in completely straight. Maxshot is hitting around 75 feet, but that was in 30 degree weather a couple weks ago. By summer it will be up more I'm guessing. The LB is around 60-70 feet as a shotgun spread.
Another pic:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/maxshot2.jpg)
I really only posted this because it was something unique and different. Also the fact that I haven't posted a mod in like 4 months. Anyway, like I said, I'll be getting a Marvelous salvo on there in the near future. Hope you enjoyed.
#144126 The Killing Of John Lennon?
Posted by
ChiliPepperFender
on 06 March 2008 - 05:45 PM
in
Off Topic
#165521 Marvelous Salvo And Marvelous Titan
Posted by
ChiliPepperFender
on 30 July 2008 - 07:29 PM
in
Modifications
How many pumps does it take for the Titan pump to fill both the titan and the Hornet? I'd expect alot.
#144334 My Rototrack Mod.
Posted by
ChiliPepperFender
on 08 March 2008 - 03:36 PM
in
Modifications
Not to sound stupid, but how does this gun work. I don't own one and haven't heard much about it.
Anyway, nice job!
#209137 Maxblitz
Posted by
ChiliPepperFender
on 02 February 2009 - 11:03 PM
in
Modifications
#161083 Question About Air Guns
Posted by
ChiliPepperFender
on 01 July 2008 - 01:26 PM
in
Modifications
On my first smdtg I pulled out the springs and it would not hold air. But I think it was somthing I did wrong.
And yes you can buy cupplers at ace,lowes,homedepo.
'Cupplers'...ok....
Anyway, they are called tubing connectors and I find all of mine at Home Depot in the irrigation section. I use 1/4 OD. I'm not sure about the springs inside of the tubing but I think saxynerfer is right about them. Also, I wouldn't bother with them unless you want to extend the tubing.
#157510 Sm750 Mod
Posted by
ChiliPepperFender
on 30 May 2008 - 10:50 PM
in
Modifications
It should be noted that the barrel should not go all the way to bottom of the airtank.
Otherwise, Nice Wright up.
Well the end of the air tank has a small white barrel around it and that's what I meant, sorry for any confusion.
http://nerfhaven.com/mods/cxwq_sm750/
Same gun, same mod.
Also, if anyone says you get more than 90 with a SM750, your lying, its not even possible I think, a 2k one is bigger and gets better ranges. I usually get 70 feet if I'm lucky.
I know it's the same gun, and mod, but's it's a different version of the gun, I also stated that in the first sentence of the write up.
90ft? It's possible. If it's not then I'm lying, and so is this guy. http://nerfhaven.com...wtopic=5448&hl= He says that with 3-4 pumps he gets this. If 90 ft isn't possible, than cxwq is also lying. You probably have something wrong with your 750 that you don't know about, because with 7 pumps those are dead on measurements for me. I don't think you can achieve 90 ft with 3 pumps though. I was only hitting 50'.
#157503 Sm750 Mod
Posted by
ChiliPepperFender
on 30 May 2008 - 10:00 PM
in
Modifications
First here's the gun stock, well mines not completely stock.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/sm750.jpg)
Anyway, you open up the gun by prying off the orange cap by the barrel as well as the one by the pump.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/sm7502.jpg)
Now take out the pump, and plug it using hot glue.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/sm7504.jpg)
Replace the barrel with about 5 inches of PETG or another barrel of your choice, and add vast amounts of etape untill it is a snug fit inside of the airtank.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/sm7503.jpg)
Put everything back together inside the gun.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/sm7505.jpg)
Screw on the screws and your done.
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/sm7506.jpg)
Range test results:
Ok, I've seen a couple other sm750 mods and they're getting in the 90's with 2-3 pumps, that's not the case for mine.
I've found that you need 7 pumps, which is when it starts to get hard to pump, to acheive ranges of 90'.
Stefan with 7 pumps:
97'
90'
87'
92'
Stefan with 3 pumps:
50'
53'
47'
48'
This was used a a 1.5 inch stefan that has a 3/0 fishing weight inside of it. The accuracy and velocity is fantastic with this gun. Comparable to my crossbow's.
For fun, I did a range test with a streamline with 7 pumps and here's what I got:
117'
109'
68'
116'
I was really surprised to see the darts soar that far, they were extremely unaccurate, but they twirled around and stayed up for a remarkable distance. Obviously, the 68' one, twirled straight into the ground. Also, all of these range test were done on a flat surface with a 0 degree angle on the gun.
Any questions, comments, flames?
#147305 Looking To Do Your First Modification?
Posted by
ChiliPepperFender
on 27 March 2008 - 04:56 PM
in
Modifications
#157522 Lnl Plunger Head Problems.
Posted by
ChiliPepperFender
on 31 May 2008 - 12:46 AM
in
Modifications
#150710 Pen Blaster Integration Into The Spy Gear Signal Launcher
Posted by
ChiliPepperFender
on 12 April 2008 - 03:29 PM
in
Modifications
#146776 Connecting Tubing
Posted by
ChiliPepperFender
on 24 March 2008 - 11:49 PM
in
Modifications
Barbed couplers, or just unscrew the compression fitting nut on the part.
I'm assuming the compression fitting is the black peice, although how did you get it off? I believe they glued it on. Should I try to pry it off with a flat head screwdriver?
#146897 Connecting Tubing
Posted by
ChiliPepperFender
on 25 March 2008 - 04:49 PM
in
Modifications
Edit:
Sorry but how do I get off the yellow tubing after I have tooken off the nut? I tried puling it off with pliers but no luck. I think, though not sure, it is glued on.
Here's a pic of what I'm talking about:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/air3.jpg)
#193868 Quick Q
Posted by
ChiliPepperFender
on 03 December 2008 - 09:13 PM
in
General Nerf
- NerfHaven
- → ChiliPepperFender's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·