Hi Yah's Content

#240973 I Call It... The Predator.

Posted by Hi Yah on 09 July 2009 - 07:37 AM in Modifications

Your titan looks kind of similar to angel's titan. And can a nitefinder handle all the added dead space of the rscb?

#240924 Longshot Carbine With Custom Cosmetics, Total Reinforcement

Posted by Hi Yah on 08 July 2009 - 10:18 PM in Modifications

Great first post! I personally love reinforcing with putty because it's so easy and effective.

#240766 Issues With Opening A Vulcan - The Slide

Posted by Hi Yah on 08 July 2009 - 06:16 AM in Modifications

On my Vulcan I could remove the bar with my hands pretty easily.

#240522 Titan/magstrike Integration

Posted by Hi Yah on 06 July 2009 - 07:31 PM in Modifications

That's one bad ass gun, but don't you think it's a little overkill to have 2 magstrikes? Aside from that it is cool and I like the paint job.

#240497 Big Bad Bow Mod

Posted by Hi Yah on 06 July 2009 - 06:10 PM in Modifications

This is a very good beginner mod, that gives decent ranges with minimal modding, but your not going to get over 100 feet flat with it. Those ranges you posted are bullshit.

#240335 Double Shot Mod

Posted by Hi Yah on 05 July 2009 - 08:47 PM in Modifications

In your video you angle your shots, and your tape measure isn't straight. That is why your ranges are that high.

#240169 Air Zone Scorpion Bow Optimization

Posted by Hi Yah on 04 July 2009 - 05:03 PM in Modifications

I did something similar to my bbb, except I cut the CPVC coupler in half and glued it inside the PVC coupler. Then, I glued that to the front.

#240100 Stormfire Internal Pictures

Posted by Hi Yah on 04 July 2009 - 10:30 AM in Modifications

This thing looks promising. I'm really glad it doesn't have a reverse plunger. Hopefully the furyfire will be the same.

#239941 N-strike Clipped Pas

Posted by Hi Yah on 03 July 2009 - 07:06 AM in Modifications

Great mod, and a clear writeup. I personnaly love how you reinforced the fuck out of it!

#239796 Recon M4 Mod

Posted by Hi Yah on 02 July 2009 - 01:25 PM in Modifications

Please, for the love of God, put some orange on that gun!

#239489 Trimav

Posted by Hi Yah on 30 June 2009 - 08:44 PM in Modifications

That thing is a beast! Just integrate an at2k in it and it will actually be war worthy. It seems a bit overkill to have three turrets, so it seems more practical to have two.

#239423 Cheapstacles

Posted by Hi Yah on 30 June 2009 - 02:07 PM in Homemades

Dowel rods would make this cheaper, and to make them go in the ground smoothly, I would reccomend picking thinner dowels and sharpening them. And to sharpen them I would use a pencil sharpener.

#239422 Pistol Splat Help

Posted by Hi Yah on 30 June 2009 - 01:57 PM in Modifications

I say just use epoxy for just about everything. And the gap in the plunger head I would reccomend filling it with goop. Also, make sure to lube every moving part and to add another catch spring.

#239196 Sspb Write-up

Posted by Hi Yah on 29 June 2009 - 09:51 AM in Modifications

Why didn't you cut the PVC a bit longer so it covers all of the brass?

#239057 Nerf In Popular Culture

Posted by Hi Yah on 28 June 2009 - 03:34 PM in General Nerf

In season one of Monk, Adrian is reinacting a homicideand shoots Sharona with an Airzone Professional.

#238999 My New Tarantula =d

Posted by Hi Yah on 28 June 2009 - 06:45 AM in Off Topic

That thing is huge! You should get a leash for it.

#238647 Raider Preview

Posted by Hi Yah on 25 June 2009 - 08:49 PM in General Nerf

Ice, I think that paintjob looks pretty good. You just have to clean it up a bit and remove all the Nerf logos and you're good to go

#238645 Jacko Dead?

Posted by Hi Yah on 25 June 2009 - 08:45 PM in Off Topic

My favorite song of his is definitely smooth criminal. His death didn't really affect me because he stopped being good a long time ago, and things have just gone down the drain for him since.

#237737 Driftkings Pistol Splat Ps-800/wipeout Mod

Posted by Hi Yah on 21 June 2009 - 07:27 AM in Modifications

Nice mod, but I'm wondering why you didn't put the ammo holders back on?

#237594 Longshot Back From The Dead

Posted by Hi Yah on 20 June 2009 - 06:42 AM in Modifications

Come on!

Once I get over how amazing one of your mods is you post another.

Does the recon barrel decrease the range?

The recon barrel covers the PVC that is sticking out of the gun, so it shouldn't affect the range.

#237487 Hornet Madness

Posted by Hi Yah on 19 June 2009 - 07:23 PM in Modifications

Unless you are a pretty good modder, I wouldn't even bother fixing it. The hornet is pretty hard gun to mod, even fir experienced modders. The end result won't even be worth it. You bought it at a garage sale, so it probably wasn't more than $5. If I were you I would scrap it. It has tons of parts.
If you really want to fix it, I would submerge the internals in water and pump it and see if bubbles come. If so, then goop up the spot.

#237255 Rscb Help

Posted by Hi Yah on 18 June 2009 - 08:27 PM in Modifications

Carbon is right. The ammo storage part is a loose material so the darts can slide forward to the barrel. If you are using CPVC you can use 1/2 inch copper as the storage unit. Copper will accept in CPVC couplers and be roomy enough for your darts to slide.

#237253 At2k Problems

Posted by Hi Yah on 18 June 2009 - 08:22 PM in General Nerf

Ok guys I`m haveing troubles with my air tech. When it`s closed it pumps but when it`s open it works fine. I`m desperet for help if you thimk you know what it is then send me a message. It would really help.

You say when its closed it pumps, but when it's open it works fine. What is the problem? You never say what happens when you try to fire it closed.

P.S. even a working air gun will pump when closed, and when it's open, work fine.

EDIT: mr.little beat me. Please ignore.

#237250 Question About Fixing Vulcans

Posted by Hi Yah on 18 June 2009 - 08:17 PM in General Nerf

My vulcan had one giant flaw: it suck donkey balls. Don't get it. The worst $45 i've ever spent.

#237119 Keyboard And Screen Sie Issues

Posted by Hi Yah on 18 June 2009 - 11:45 AM in Off Topic

Take a compressed air can and use the straw to blow out dirt from under the keys. You can find the compressed air can at Office Depot.

#236880 The Massacre 4 Videos

Posted by Hi Yah on 17 June 2009 - 08:06 AM in Nerf Wars

I loved that tiny kid with the orange and white bbbb. It was just so funny.

#236787 Guide To Barrel Material

Posted by Hi Yah on 16 June 2009 - 04:05 PM in Modifications

I have tried PEX from Home Depot and it is noticeably tighter that CPVC. I was able to real load with it but if I tried to ram rod the tip of the dart would go into the center of the foam behind it and would ruin the dart.

#236783 Raider Preview

Posted by Hi Yah on 16 June 2009 - 03:31 PM in General Nerf

I wonder if you can add e-tape to the plunger to compress the spring more? That could give you decent ranges.

#236712 Daedalus Iii

Posted by Hi Yah on 16 June 2009 - 09:21 AM in Homemades

Amazing. So, it's pretty much a semi homemade doubled nitefinder, right?

#236486 Raider Preview

Posted by Hi Yah on 15 June 2009 - 04:51 PM in General Nerf

This thing looks like it has some potential. It appears to be a beefed up recon that looks way cooler! If this gun can be Angel breach it might actually be pretty good.

#235289 Performance Differences In Variants (color, Etc.) Of The Same Gun

Posted by Hi Yah on 09 June 2009 - 07:04 PM in General Nerf

Personally I don't care about the different gens being weaker because we are going to mod them so it doesn't matter. The first gen of a gun is usually only better when stock, but once modded all gens will produce the same results.

#235251 Tech Target Brass Breach

Posted by Hi Yah on 09 June 2009 - 05:16 PM in Modifications

Nice mod. I personally prefer breaches to couplers because they are faster.

#234638 Dart Tag Blaster Modification

Posted by Hi Yah on 06 June 2009 - 03:11 PM in Modifications

Nice write-up. You don't see too many dtb barrel replacement write-ups, so this is helpful for some noobs with dtb's.

#234512 Wildfire

Posted by Hi Yah on 05 June 2009 - 05:50 PM in Modifications

Nice mod. I've never seen a write-up of the Wildfire, so this is very helpful for those who have one; although, it is a pretty self explanatory mod.

#234335 Noob Question But.....

Posted by Hi Yah on 04 June 2009 - 07:47 PM in General Nerf

The only difference would be the density and circumference. It all depends on your foam. You pretty much just have to pick one that fits your barrels good, and that is pretty firm.

#234277 Bbbb : Lerazor Variant

Posted by Hi Yah on 04 June 2009 - 02:24 PM in Modifications

"Rear loading was well over 200ft"
I'm calling BS on that

Yeah, that's is impossible for a big blast to shoot 200 feet.

By content type

See this member's

Sign In