MAC's Content

#16689 Multi Barrel 750

Posted by MAC on 19 January 2004 - 05:30 PM in Modifications

I had a random Air Tech 2000 barrel sitting around, so i decieded to put it onto my sm 750 pistol to increase its ROF. With some 17/32 brass, it gets about 70-80, and its accurate, however their is is a small problem. The trigger is extreamly hard to pull, so its hard to get a quick shot off. I tried the BIC pen trigger pull mod, but it did not help very much. Has anyone else had this problem with their 750, and what can i do. Thanx

#11478 Thrift Stores?

Posted by MAC on 15 October 2003 - 08:29 PM in General Nerf

I hear people saying that they find old guns at thrift stores. What is a thrift store, and where can i find one?
THanx

#20291 At2k Pumps

Posted by MAC on 29 February 2004 - 05:19 PM in General Nerf

hey the same thing happened to me. You are pumping it to much, and when you pull hte triger back it does not allow all the air to come out. 5 pumps is more than enough.

#71538 Stefan Trouble

Posted by MAC on 23 January 2006 - 02:46 PM in General Nerf

You have 2 options

1) buy a different brand of FBR and hope it fits

2) use brass barrels...cpvc is tighter than brass (17/32)

#10614 How Do I Post A Pic

Posted by MAC on 28 September 2003 - 05:22 PM in General Nerf

thank you

#10609 How Do I Post A Pic

Posted by MAC on 28 September 2003 - 04:56 PM in General Nerf

I want to post some pics of some nerf guns but i cant figure out how. Can someone help?

#10141 At2000+brass

Posted by MAC on 21 September 2003 - 04:13 PM in Modifications

Im going to multi barrel a AT2000 with brass, but am not sure what size. Should i use 9/16, or 17/32?
Thanx

also is 6 inch barrels good?

#23932 My Max Shot Is Cracking Up

Posted by MAC on 10 April 2004 - 07:01 PM in Modifications

Wow the exact thing happened to mine. I hotglued it back on then loaded it up with ductape and it worked fine. Then like a month later the cocking handle broke where it pulls up the white thing in the gun, and i had to trash it. I think the plastic of the maxshot is very cheap.

#9009 My Old Bow N Arrow

Posted by MAC on 01 September 2003 - 07:26 PM in Modifications

Before I found out about "modded" guns, my friends and I would just have indoor nerf wars with unmodded guns. One war, I was using my bow, and the bottom handle broke off. I tried hot glueing it, but it dosnt just come right off. Is thier a way to get it back on such as a nail or sumthing? Thanx

#24456 How Many Max Pumps For At2k

Posted by MAC on 18 April 2004 - 10:50 AM in Modifications

I pump mine about 5 times

#9646 Anyone Have Pic Of Internals Of Sm 5000

Posted by MAC on 14 September 2003 - 10:31 AM in General Nerf

I took apart my supermaxx 5000, but everything fell out, and i can figure out how to put the little black plastic piece back in which makes the gun fire. does anyone have a picture of the internals of a supermaxx 5000 unmodded?
Thanx

#9840 Anyone Have Pic Of Internals Of Sm 5000

Posted by MAC on 17 September 2003 - 07:40 PM in General Nerf

Heyyyy thanx for the encourgament.......actually your the one who is wrong, becuase i was asking for a pic of the internals of an unmodded SM 5000, and the only pic's they have on this site, and all the other nerf sites i know, are the internals of one already modded.

#9954 Anyone Have Pic Of Internals Of Sm 5000

Posted by MAC on 18 September 2003 - 05:59 PM in General Nerf

yes i know exactly where everything goes, except one piece. It is the small black piece that goes on a metal rod. When you pull the trigger it moves the piece which fires the gun. I cant figure out how the black thing goes back in.

#9652 9/16 And Maxx Shot

Posted by MAC on 14 September 2003 - 04:06 PM in Modifications

I want to do the maxx shot mod on nerfhaven and im confuesed. is the 9/16 suppost to fit 1/2 inch stefan's becuase when you put one in, it slides right out of the 9/16 inch brass.

#9356 What Are Zero Darts

Posted by MAC on 07 September 2003 - 02:54 PM in General Nerf

What are zero darts and how do you make them?

#9234 Y Does Everyone Favor Single Barrel

Posted by MAC on 04 September 2003 - 07:37 PM in Modifications

I have seen so many posts where people are showing off thier new single barrel gun, and saying how great it is. From all the nerf wars I have played with my friends, i have found that multi barrel guns are much better. For example. The normal gun i use in a nerf war is my 4 barreled At2000. Most of my other friends use single barrel max shots and at3000. I am usually the winner, because after they fire one shot at me and miss, i rush them while they reload thier only barrel, and i hit them with one of my 4 barrels. So tell me, why is everyone telling people that single barrels is the way to go?

#117650 Old Video

Posted by MAC on 30 July 2007 - 04:18 PM in General Nerf

So I was looking through old videos and came across a nerf war I had in my basement back in the day. One clip I found was amazing so I had to post it. My friend shoots his little brother in the face with a maxshot from about 5 feet away.

#32409 How Does The Modded Max Shot Stack Up?

Posted by MAC on 27 July 2004 - 08:36 AM in General Nerf

Nope

#12686 Modding At2k Multi

Posted by MAC on 10 November 2003 - 07:52 PM in Modifications

just pull out the barrels at the line, but if they dont come out easily, cut right below the line. CPVC works great, but you have to sand down the end for it to fit into the barrel holder.

#9011 Max Shot

Posted by MAC on 01 September 2003 - 07:43 PM in Modifications

I have been wanting to make the combo of At 2000 4 barrel as my pistol, and a single barrel max shot as my loser. The At 2000 turned out great, getting around
70ft. The max shot only gets around 60 feet tho, and i was told it should be much better than that. Wat i did was pry off the red top, and then buy a cpvc 1/2 cupler, which fit snug on the white tube, which i didnt saw at all. After that it measured 3 inches. I then cut a 9 inch piece of cpvc, and stuck it in the cupler. To load it, all i do is pulll out the cpvc, and load the dart in, then jam the cpvc back in. Did I modd this right, or is thier sumthing i can do to get the range everyone is is telling me they get. around 90 feet.
Thanx

#12153 I Need Help

Posted by MAC on 30 October 2003 - 06:09 PM in Modifications

YO are you sure your crossbow is broken beyond repair. Its a rare gun you shoud try to fix it.

#35223 Maxshot Difficulties

Posted by MAC on 25 August 2004 - 09:23 PM in Modifications

Ahh the exact same thing happened to mine. Open it up, and you will see a small white piece that holds the plunger when it is pulled back, and when the gun is shot the trigger pushed this white piece down. This piece has a little spring that pushed it up allowing it to hold onto the plunger as it is pulled back. The spring on it probably broke. It happened to me so what i did was take a normal spring and put it under the white piece to hold it up.

(this might be confuesing because it is hard to explain)

#15522 Sm 5000 Help

Posted by MAC on 02 January 2004 - 06:31 PM in Modifications

I did the SM 5000 barrel relocation mod, and when i shortened the air tubeing, it now leaks from the connection when I pump it. What should I use to get an air tight seal. My hot glue is not working. I've heard plumbers goop is good. Is it sold at a local hardware store, or are their better types of airtight glues?
Thanx

#42290 New Lanard Gun

Posted by MAC on 23 November 2004 - 06:37 PM in General Nerf

At kmart today i found what i think to be a new gun because i cant seem to find any topics on it.

Its a large pump gun called the "Big Salvo" which shoots 4 arrows eather 1 at a time or all at once. It claims to shoot 45 feet on 10 pumps, which is true because i tried it. I havnt opened it up yet, but it seems to be modable. Ill try to get pics soon. If this gun is already known about you can close this topic.

#20879 Most Interesting 1500 Break I've Seen

Posted by MAC on 07 March 2004 - 06:55 PM in Modifications

hey the same thing happened with one of my sm 1500. All i did was stick some hot glue onto the end that i had left and quickly put it down into the pump. After it dried i pulled both pieces out.

#11435 Spring For Eagle Eye

Posted by MAC on 14 October 2003 - 07:16 PM in Modifications

Foamfortress still will not work for me, so i made up my own modd. All i did was widen the hole the air comes through, and put a 7 inch cpvc barrel on it. (my 1/2 inch FBR is smaller than most types so cpvc works great,) but only got about 45-50 feet. Is thier anything do do to get more range?

#11358 Spring For Eagle Eye

Posted by MAC on 13 October 2003 - 03:51 PM in Modifications

Im modding my eagle eye right now, and was wondering what type of replacement spring to buy. I tried to look on foamfortress but the site isnt working.
Thanx

#18993 Pom-pom Stefans

Posted by MAC on 14 February 2004 - 10:22 AM in General Nerf

I made a new bullet that flies just as far as my normal stefans, and it dosnt hurt anywhere near as much.
I got a small pom pom, and on the back of it i glued a 1/4 slingshot ammo. I then made a large hole in one tip of the stefan, and glued the pompom and slingshot ammo into it. It does not hurt nearly as bad as a normal stefan, and it flies just as far. Ill try to post pics later today.

Has anyone else done this before?

Edit...the new darts still hurt, but not nearly as bad as others do.

#9345 Flea Market Find

Posted by MAC on 07 September 2003 - 11:18 AM in Modifications

Yea and the best part was that they were only 2 dollers each. Im going back right now becaue more people selling stuff just came. If i get any more guns ill post what I got.

#21388 New Barrel Type Good Results

Posted by MAC on 15 March 2004 - 09:23 PM in Modifications

HAHA yea I actually ductaped up the window, and since it was in the basement only my dad has seen it so far, and he wasnt very angry.

#21383 New Barrel Type Good Results

Posted by MAC on 15 March 2004 - 08:07 PM in Modifications

I purchesed some 1/2 inch clear airline tubeing, and it fit tightly into 1/2inch pvc that straightened it out. I put a 6 inch piece onto an at2000, and i am getting amazing results. It shoots micros almost 120 feet, with great voicity. From about 40 feet away, it broak through a glass window :cry:

Ill try to post pics soon

#9338 Flea Market Find

Posted by MAC on 07 September 2003 - 09:53 AM in Modifications

I went to a huge flea market today near my house, with over 200 people selling stuff, but only found two nerf guns. An arrow storm and Bow n arrow. Are eather of the guns i got any good once modifyed?

#21424 New Barrel Type Good Results

Posted by MAC on 16 March 2004 - 08:19 PM in Modifications

Sorry but what does PSI mean?

yes it is the same stuff as the aquarium tubeing.

#10635 How To Make A Holster

Posted by MAC on 28 September 2003 - 07:14 PM in General Nerf

I want to make a holster for my at2000, so i can carry around to guns, but im not sure how. I heard a while ago about someone makeing one out of a hanger, but im not sure.
Thanx

#10640 How To Make A Holster

Posted by MAC on 28 September 2003 - 07:47 PM in General Nerf

Hey dj hurley im confuesed with your pics. How do you bend it so that you have two rounded sides next to each other? (if wat i said makes any sense)

#10617 How Are My Guns?

Posted by MAC on 28 September 2003 - 05:27 PM in General Nerf

The At2000 is 4 barrel cpvc with antother at2000 internal single barrel glued to it. both guns shoot about 70 feet...this is my main gun i use in wars

The sm5000 is 11 inch 17/32 brass loser wich shoots around 100 feet

The Tech target gets about 50 feet, i did one of the mods that someone posted.

Tell me what you think

http://www.villageph...selected=514964

#10624 How Are My Guns?

Posted by MAC on 28 September 2003 - 06:45 PM in General Nerf

Yea im going to reglue the barrel to make it sturdy. I tried the air tank relocater, but i couldnt figure it out so i decided not to do it. Is 11 in to long?

#43207 Titan/2k

Posted by MAC on 02 December 2004 - 09:59 PM in Modifications

Hey I have been working on the same concept for the past 3 months. I had the same problem with you so heres what i did. I took the orange piece out of the hornet that pressses up against the titen to let air in. I put sum vinal tubbing into it and atached it to a 2k tank, so when i want to fill up the tank i press the airtank back to make a seal and it will fill when i pump the titen. To keep the air in the tank i cut the vinal tubbing in half and inbetween it i put a fishtank check valve which will not let the air out of the tank. Hope this is not to confuesing

#46919 Superbowl Pick

Posted by MAC on 05 February 2005 - 02:29 PM in Off Topic

EAGLES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

#35135 Possible Thanksgiving War?

Posted by MAC on 25 August 2004 - 09:24 AM in Nerf Wars

I have to check with the philly guys, and make sure everyone is available. I just checked my school off dates, and i have no school then, but my brother is comming home from collage, so my mom might make me stay home and see him.

OMC: I ask the guy about the bullets/guns

MAC's Content

By content type

See this member's

Sign In