Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5133 replies to this topic

#4126 MrPzowned

MrPzowned

    Member

  • Members
  • 46 posts
  • Location:Indiana
  • State:Indiana
  • Country:United States

Posted 23 July 2012 - 08:50 PM

I got it first yo. I was surprised to find the yet to be officially released BuzzBee Range Master at a local good will NIB for 2 bucks! What a steal! Its also popping up in Targets for around 18$. I was pleasantly surprised to find that it is an airgun. You pump it using the bolt, insert a dart, and instant right-out-of-the-box 60 foot ranges. Any micro (brand doesn't matter) will work, except streamlines.
Posted Image
Removed air restrictor peg, (not shown) and ranges increased to 75ft (darts start to fish tail a bit.
Posted Image
Full write-up tomorrow. Also the sight is incredibly accurate and useful. The shell is very comfy, and the handle if for big kids too!
Posted Image
Bad, and hurried overview video

(might still be processing)

Edited by MrPzowned, 23 July 2012 - 08:59 PM.

  • 0
17:54 Noodle Yes what he did was stupid
17:54 Noodle but it's a plastic toy
17:54 Gears BUT IT COULD'VE BEEN MY PLASTIC TOY

#4127 Righteous Fondue

Righteous Fondue

    Member

  • Members
  • 110 posts
  • Location:Bay Area
  • State:California
  • Country:United States

Posted 24 July 2012 - 03:44 PM

My sceptor with raider stock. I need to re-inforce it with some E-putty, and maybe relocate the tank. Optimally I'd like an equal or slightly lesser volume airtank positioned under the raider stock, and have a pressure gauge where the stock hard tank is, so I can see roughly how many shots I've got left without moving my view.
Posted Image
Apologies for the crappy pic, took it early this morning with my Ipad

EDIT: More visible and less hipster-ass pics
Posted Image
Posted Image

Edited by Righteous_Fondue, 25 July 2012 - 01:33 PM.

  • 0
They don't think it be like it is, but it do.

#4128 shmmee

shmmee

    Member

  • Members
  • 467 posts
  • Location:West Valley, Ut.
  • State:Utah
  • Country:United States

Posted 24 July 2012 - 04:35 PM

Semi - auto Dart Tag Gun

I really didn't expect this to work - hence the overly ravaged screw ports and zipties.
Posted Image
8" pegt barrels, RF 20 bladder double layered with bike inner tube to increase pressure (still needs a bar across the front to trigger the overfill safety valve), dual action bike pump...
Posted Image
Rear loading hole with sch 80 pvc dart guide (still needs to be reinforced with more than just hot glue)
Posted Image
Internally it has a BS tank, and is operated by a clippard MAVO-3 valve. It vents (fires) the BS tank without venting the reserve bladder. The seal is pretty good. I just took the linkage that ran from the old pt to the turret, sanded half off till one side was flush and connected it via hose to the bs tank. Not shown are a pair of springs I had to run from the back of the turret anchor to the trigger.

I get 5-6 quick shots per fill, grouping around 80' in range.

Click the pic to see a firing video:
Posted Image

Edited by shmmee, 24 July 2012 - 04:36 PM.

  • 0
"and we should respect the people who make our blasters. Even if we do molest the hell out of them..."
~BritNerfMogul


#4129 Pause

Pause

    Member

  • Members
  • 107 posts
  • Location:Honolulu, Hawaii
  • State:Hawaii
  • Country:United States

Posted 24 July 2012 - 11:02 PM

Posted Image

I used the original pump handle on my Sceptor.

Posted Image

I just need a hopper now. :)
  • 0
-Pause-

http://nerfpause.blogspot.com/

Heh.

USER WAS BLAND IN THIS POST


#4130 Righteous Fondue

Righteous Fondue

    Member

  • Members
  • 110 posts
  • Location:Bay Area
  • State:California
  • Country:United States

Posted 26 July 2012 - 07:22 PM

Sceptors Everywhere!
I worked on mine a bit today, reinforced the stock.
Posted Image
Posted Image
[VGTG]
  • 0
They don't think it be like it is, but it do.

#4131 Wogboy715

Wogboy715

    Member

  • Members
  • 1 posts
  • Location:Brisbane
  • State:Queensland
  • Country:Australia

Posted 28 July 2012 - 05:19 AM

I am really new to this forums. Here's one nite finder I painted and modded. Just simple AR removal and spring addition.

Posted Image
  • 0

#4132 hydro cannon kid

hydro cannon kid

    Member

  • Members
  • 35 posts

Posted 29 July 2012 - 08:45 PM

I like it man.
USER WAS WARNED FOR THIS POST

This thread is for pictures. Also don't quote an entire other post.

Edited by Zorn's Lemma, 29 July 2012 - 10:29 PM.

  • 0

#4133 Black Chrome

Black Chrome

    Member

  • Members
  • 6 posts
  • Location:Canada
  • State:Saskatchewan
  • Country:Canada

Posted 29 July 2012 - 10:11 PM

Have been lurking around a while, thought id share my guns.

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Ive done simple mods to them, but mostly they are just eye candy ^_^
  • 0

#4134 Shoopy

Shoopy

    Member

  • Members
  • 208 posts
  • Location:Sunbury, PA 17801
  • State:Pennsylvania
  • Country:United States

Posted 30 July 2012 - 08:59 AM

Finished my Overhauled 3K. I only wish I could shoot Chaos with it this APOC. It's too bad he's studying how to make the perfect egg roll across the Pacific.


Posted Image

Gotta represent!

Posted Image

Edited by Shoopy, 30 July 2012 - 09:04 AM.

  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#4135 nine

nine

    Member

  • Members
  • 132 posts
  • Location:Edmonton
  • State:Alberta
  • Country:Canada
  • u/erfnay on Reddit
  • Erfnay on Youtube

Posted 30 July 2012 - 02:08 PM

My rear loading, cpvc barrelled firefly.

Posted Image

Posted Image

Posted Image

It shoots between 50 and 60 feet.

Youtube video
  • 0

Everyone hates engineers because they listen to what you say and then think about it.

 

Check out my YouTube!

 

 


#4136 TheSilentRebel

TheSilentRebel

    Member

  • Members
  • 172 posts
  • Location:Home-York, PA College-Grove City, PA
  • State:Pennsylvania
  • Country:United States

Posted 30 July 2012 - 02:40 PM

It's over.

Posted Image

Homemade adjustable OPRV included.

Posted Image

Because everyone wants to get shot by a pink gun.
  • 0
We are men of action, lies do not become us.

#4137 mysterio

mysterio

    Member

  • Members
  • 249 posts
  • Location:Pasadena, California
  • State:California
  • Country:United States

Posted 01 August 2012 - 02:55 AM

Completed this a LONG time ago, nut never posted internals pics. This is for you, shmee.

Posted Image

Posted Image

Posted Image
  • 0

If two powerful is a problem then just go with one powerful. I guess this style of hopper will work even beyond three powerful..


15:46 *** Buff is now known as TheGdiddler
15:51 TheGdiddler I'M GONNA GRAPE YOU"

#4138 nine

nine

    Member

  • Members
  • 132 posts
  • Location:Edmonton
  • State:Alberta
  • Country:Canada
  • u/erfnay on Reddit
  • Erfnay on Youtube

Posted 03 August 2012 - 11:29 AM

Awesome Jolts!

Sporting a three dart rscb, hits 40s with a decent rof

Posted Image

Glued the ar into 1/2"pvc to act as a stopper.

Posted Image

Youtube video

Jolt integrated into a recon stock; modding a stock gun!

Posted Image

Fits right on to any n-strike stock attachment.

Posted Image

The pvc bars make it super sturdy.

Youtube video

Edited by nine, 08 August 2012 - 07:10 PM.

  • 0

Everyone hates engineers because they listen to what you say and then think about it.

 

Check out my YouTube!

 

 


#4139 ShaNayNay

ShaNayNay

    Member

  • Members
  • 252 posts
  • State:Missouri
  • Country:United States

Posted 03 August 2012 - 12:11 PM

My first RSCB. Shoutout to Venom and/or Daniel for the idea and brief writeup. It holds 6 2" stefans. It works perfectly every time, but I'm only getting ranges between 25'-45' due to the FBR I used for the darts being too thin. Once I get better quality foam and improve at making darts I expect it to reach the 50-60' mark. Can't wait to try it out at SLANE tomorrow.

Posted Image
  • 0

New Jersey is fuckin weird


#4140 leafy

leafy

    Member

  • Members
  • 46 posts
  • Location:beltsville 20705
  • State:Maryland
  • Country:United States

Posted 05 August 2012 - 10:58 AM

Overhauled expand a blast with integrated 2k. THE HYPERLEAF 2000. Battle worn lime-green and grey paintjob.

Posted Image

Close up.

Posted Image
  • 0

If you guys find it fun, then by all means flail and thrust away.

- Daniel Beaver

#4141 darknyght00

darknyght00

    Member

  • Members
  • 9 posts

Posted 06 August 2012 - 06:32 PM

OK, here we go. Ladies and gentlemen, I give you the Aperture Science Zombie Elimination Device (Z.E.D.)

Posted Image

This is a Swarmpistol inspired by Bobololo over on the HvZ boards as his is the only other one I know that retained the original grip and shoulderstock. I'd like to think I've improved upon the platform slightly with a few new features.

Posted Image

As you can see, I've mounted the gearbox in such a way that the stock is still perfectly removable. It's every bit as solid as a NIB Swarmfire.

Posted Image

One of the biggest issues that a Swarmfire/Swarmpistol has is slow reload times. I've fixed this by creating the first (to my knowledge) swappable cylinder mod for this blaster. With some careful dremeling, the orange collar make a perfect retention/release mechanism.

Posted Image

Posted Image

It's always nice to have an early warning when any electric blaster is low on juice, so I mounted a voltmeter panel just above the grip.

Posted Image

Finally, zombies don't just go away once the sun goes down. Occassionally, some illumination is required to identify your target.

Posted Image

The six LEDs mounted to the front of this turret are rated at 18000mcd each and provide as much light as a pretty nice pocket torch. The lights are powered by a single 14500 trustfire cell housed inside the cylinder.

Posted Image

Performance is standard for an AR removed Swarmpistol running 4 trustfire 14500 cells and an SGNerf upgrade spring.
  • 0

#4142 LT DAN ICE CREAM

LT DAN ICE CREAM

    Member

  • Members
  • 106 posts
  • Location:Philadelphia, PA
  • State:Pennsylvania
  • Country:United States

Posted 06 August 2012 - 08:01 PM

Posted Image


When all else fails, add on a (sloppily done, just like everything I do) SMDTG to my UMB Raider. Both blasters fill with the bike pump, and there's a check valve so the SMDTG doesn't pop off when the main gun fires. Take note of the Molson Canadian bottle cap, as because all good mod ideas usually come to me while drunk.
  • 0

#4143 RedFear

RedFear

    Member

  • Members
  • 58 posts
  • Location:Champaign
  • State:Illinois
  • Country:United States

Posted 06 August 2012 - 08:21 PM

Here's a picture of my friend's longshot i just painted for him, along with a shot of my current longshot:
his:
Posted Image
petg barrel mated to brass bolt with double spring

Posted Image
brass barrel mated to brass bolt with 20kg spring and reinforced Xplorer boltsled. yes scope is sighted in (for 20-30 ft).
  • 0

#4144 Shoopy

Shoopy

    Member

  • Members
  • 208 posts
  • Location:Sunbury, PA 17801
  • State:Pennsylvania
  • Country:United States

Posted 06 August 2012 - 09:33 PM

Sneak preview on a WIP.

Posted Image
  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#4145 ghosty17

ghosty17

    Member

  • Members
  • 6 posts

Posted 07 August 2012 - 08:35 PM

I've been lurking for about 3-4 years now and finally got something done.

Posted Image

Started out as your standard Nite Finder minimization and marker mod (pretty standard ranges) then I got carried away.

Posted Image

AR's removed. The brown material I used is Crayola Model Magic, which is very light, easy to work with, and pretty cheap too. It forms the base of the grip/ammo holder and fills out the front of the cut shell.

Posted Image
Posted Image

The 'magazine' is made of no more than some glue, cardboard, and duct tape. Altogether the cosmetic mods took maybe an hour, not including setting time for the Model Magic, and add a great deal of practicality.
  • 0

#4146 Shoopy

Shoopy

    Member

  • Members
  • 208 posts
  • Location:Sunbury, PA 17801
  • State:Pennsylvania
  • Country:United States

Posted 08 August 2012 - 11:15 AM

Well I had some spare time last night and did't want to watch Gymnastics and I did work. In a nut shell, this is a 4B crammed into a stampede shell with a magstrike pump. Hits a good 100' with 8 or 9 pumps. I actually like it better than the stock shell. A tad messy, but with my mods I really don't care how they look.

Posted Image


Posted Image
  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#4147 wifethinksimageek

wifethinksimageek

    Member

  • Members
  • 6 posts
  • State:Arizona
  • Country:United States

Posted 08 August 2012 - 01:15 PM

My newly painted BB Range Master

Posted Image
  • 0

#4148 Eik

Eik

    Member

  • Members
  • 120 posts
  • State:Wisconsin
  • Country:United States

Posted 08 August 2012 - 06:58 PM

"Can it be– I've stayed away too long?"

Unfortunately the Real World has kept me away from nerfing. But I still was able to work on one lone blaster!
Originally intended as a gift for a co-worker, I customized this over-under Doubleshot for the fun factor.

Posted Image

Posted Image

Edited by Eik, 09 January 2014 - 12:53 AM.

  • 0

#4149 nine

nine

    Member

  • Members
  • 132 posts
  • Location:Edmonton
  • State:Alberta
  • Country:Canada
  • u/erfnay on Reddit
  • Erfnay on Youtube

Posted 08 August 2012 - 10:37 PM

Nitemav with pretty sweet pj in my opinion.

Posted Image

My new secondary for neighborhood wars.

Posted Image

Youtube video
  • 0

Everyone hates engineers because they listen to what you say and then think about it.

 

Check out my YouTube!

 

 


#4150 lasagna678

lasagna678

    Member

  • Members
  • 65 posts
  • Location:Walker, MI
  • State:Michigan
  • Country:United States

Posted 09 August 2012 - 01:23 PM

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users