Modification and Paintjob Pictures
Posted 02 July 2012 - 05:49 PM
All that I had to do is cut a small square in the side for the tank to fit, and then sand out the insides, add some super glue, and done.
Ranges: 120-140 ft (singled)
U Mad Bro?
Posted 03 July 2012 - 12:38 PM
Edited by Zorn's Lemma, 03 July 2012 - 12:55 PM.
pictures thread means pictures bro
Posted 03 July 2012 - 09:17 PM
Range (hoppered 4 pumps): 120ft
Posted 05 July 2012 - 12:23 AM
Here's my unworthy mod. By the way... Mavericks SUCK. This thing gets around 80ft angled though. Why this ungodly number for a Maverick? Some shit snapped off inside when I was cocking the gun and instant gain of 20ft. Works for me...
Check out my half-ass job.
So that's my contribution. I believe that there is also a similar mod somewhere on this forum.
Posted 10 July 2012 - 07:01 AM
So, my mom gave me an Eliminator for Christmas...
It looks pretty normal...
Of course, it's not. I preloaded the spring with some masking tape, so that it's at full compression when it's cocked.
I also made an aluminum barrel. It has a .485" ID for a nice, tight springer fit. The groove for the O-ring is a few thousandths shallower than the stock one, so the seal is almost perfect.
The seal is so good that I had to install a piece of .032" music wire to prevent the dart from getting sucked into the plunger.
Ranges are decent, around 45' flat with a good dart. Of course, it can go much farther if you dart-punch with it.
And, of course, the obligatory video.
That's awsome for an eliminator, how long did it take to make?
Posted 11 July 2012 - 05:49 PM
I got lazy and didnt redo the plastidip for the grips. I may sometime soon.
All my guns conveniently fit inside a ~16" bag. I achieved my goal.
Edited by andtheherois, 11 July 2012 - 05:54 PM.
Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.
Posted 11 July 2012 - 06:03 PM
This is my first mod and paint job. It's a singled maverick.
mods done: minimised, spring compression + spring addition and paint job.
paints used: for spray paint I used belton molotow, and for dry brush I used "Humbrol" Enamel paint numbers 117 and 84.
hope you like.
Edited by zacsdaman97, 11 July 2012 - 06:38 PM.
Posted 12 July 2012 - 09:06 AM
And my longstrike. Just has AR removal,peg removal, and detachable clip mods. I might get an OMW stage one kit for it later.
Also, if you are wondering why the handle of the maverick is missing, I wanted to attach it to the underbarrel of the longstrike for a shotgun-attachment-like thing but I used the wrong stuff to bond it.
Edited by Green8, 12 July 2012 - 09:09 AM.
Posted 12 July 2012 - 12:22 PM
Posted 16 July 2012 - 12:07 PM
Finally found a use for one of the 2 side rails I had to sacrifice for my 2nd generation Pulse Rifle.
Surprisingly comfy, and very solid. The rail is simply screwed to the shell using the existing screw ports in the rail. Now I know that it works, I'm working on trimming the rail down so it sits a little lower on the shell.
Much happier now.
Edited by BritNerfMogul, 16 July 2012 - 04:43 PM.
Posted 16 July 2012 - 05:06 PM
What's this.. a 2k tank?
Sweet paintjob, 2k tank, sm3k pump, 2 pumps = 100 + ft. Plus it's supa' clean.
Edited by leafy, 16 July 2012 - 05:27 PM.
- Daniel Beaver
If you guys find it fun, then by all means flail and thrust away.
Posted 17 July 2012 - 01:02 AM
Note: A lot (if not all) of the marks on it were there when I got it at a thrift store.
Edited by bhajj94, 02 August 2012 - 01:23 AM.
Posted 17 July 2012 - 01:17 AM
PA POWER Clan Is that all ya got?
Posted 18 July 2012 - 11:41 AM
Edit for Elite PAS. I didn't match the blue right, and its going to bother me so I might redo it.
Edited by ilikefish58, 18 July 2012 - 06:04 PM.
Posted 19 July 2012 - 11:24 AM
Edited by ShaNayNay, 19 July 2012 - 02:27 PM.
New Jersey is fuckin weird
Posted 19 July 2012 - 01:23 PM
Totally freehand (and the flaws are less noticeable when you aren't zoomed-in with a camera!) I am fairly pleased with it.
The fourth exciting Nerf War in Fort Wayne, IN.
Posted 19 July 2012 - 02:59 PM
• O-Ring/Seal Improvement
• AR Removal
• "Penny" Mod
• Custom Paint Job
Posted 23 July 2012 - 06:40 PM
PA POWER Clan Is that all ya got?
Posted 23 July 2012 - 07:25 PM
Edited by Eraser475, 24 July 2012 - 09:41 AM.
"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo
"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.
1 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users