Hi Yah's Content

#255627 What Type Of Tubing Will Fit 13mm Fbr? resolved!

Posted by Hi Yah on 07 November 2009 - 07:13 PM in General Nerf

Just take your foam to different stores and check the fit in various barrel materials. It's as easy as that.

#255797 Recon Cs-6 And Ertl Rapid Fire Shot Gun Mod

Posted by Hi Yah on 09 November 2009 - 07:16 PM in Modifications

So basically, it's a longshot on steroids, right? Nice mod, all it needs now is a paintjob.

#256021 Just Toys 1992 Crossbow.

Posted by Hi Yah on 11 November 2009 - 09:00 PM in Modifications

That's pretty cool. Could we get an internal pic?

#256412 Firefinder

Posted by Hi Yah on 15 November 2009 - 10:44 PM in Modifications

So whats the point of this mod? You only dampened the range of a NF.

This could be useful to someone if they need a pistol and when modding their new NF, the plunger tube shattered. They could then use this as a backup idea.

You could just go to Petco and get some 1" thinwall PETG for the plunger tube.

#256634 "silencing" My Nf

Posted by Hi Yah on 17 November 2009 - 08:42 PM in Modifications

How is the fbr method expensive? It cost about $3 for a 20' roll, and you only need about 1' to silence it. That's about 15 cents to silence your nf.

#256639 Handyman #9713 Spring = Which Ace Spring?

Posted by Hi Yah on 17 November 2009 - 09:17 PM in Modifications

Hey guys, I am looking for stronger springs for my Raider and Recon. Any suggestions? Thank You.

You could replace the spring with one from rfsg.

#256843 Nitefinder Rifle Question

Posted by Hi Yah on 20 November 2009 - 07:37 AM in Modifications

Use 1" PETG from petco. It will fit the stock plunger tube pretty good. I believe that's what kbarker used.

#256889 At3k Internals Questions

Posted by Hi Yah on 20 November 2009 - 09:46 PM in Modifications

You could just cut the tubing as close to the goo gauge as possible, on both sides. Then you can attach tubing with barbed connectors.

#256920 At3k Internals Questions

Posted by Hi Yah on 21 November 2009 - 08:32 AM in Modifications

Use 3/16 barbed connectors. I know Home Depot has them, but I don't know if Ace has them.

#257251 Inline Clip

Posted by Hi Yah on 25 November 2009 - 04:37 PM in Modifications

This seems to be a good time to ask, because I've been curious; is there any sort of PETG, or clear piping that fits snugly in a CPVC coupler, but is thin enough to allow the darts to fall through?

I've heard of some people getting 5/8 PETG from some pet stores.

#257442 How To Make Hollow Stefans (tutorial)

Posted by Hi Yah on 28 November 2009 - 10:55 AM in General Nerf

Do you have to heat up the nail for every dart? And do you think it's worth the extra time to make them?

#257755 Mav Help

Posted by Hi Yah on 01 December 2009 - 09:50 PM in Modifications

Add a firefly spring. Your gun will be pretty beastly for a mav. Also, replace the barrels with PETG.

#257767 Mav Help

Posted by Hi Yah on 01 December 2009 - 10:46 PM in Modifications

Add a firefly spring. Your gun will be pretty beastly for a mav. Also, replace the barrels with PETG.

By ADD a FF spring, do you mean have a mav sprin AND a FF spring in the gun or JUST the FF spring?

I mean just the firefly spring alone.

#258535 Can't Afford A Splitfire? Smdtb To The Rescue!

Posted by Hi Yah on 09 December 2009 - 08:42 PM in Modifications

Great job badwrench. The only problem I can think of is that a smdtb can't get the same ranges as a splitfire, but other than that it's great.

#258621 Specific Nightfinder Question

Posted by Hi Yah on 11 December 2009 - 07:39 AM in Modifications

Just fill it with epoxy putty and sand it smooth.

#258911 Nite Finder Ex3 Problems

Posted by Hi Yah on 13 December 2009 - 10:19 PM in Modifications

Just hot glue the plunger tube to the shell.

#259638 Berserker Fusion! Daikaiju!

Posted by Hi Yah on 23 December 2009 - 10:33 AM in Modifications

Couldn't you just take a heat gun to some CPVC and bend it so it fits in the shell? This would remove the need of an elbow and cut down on the dead space.

#260019 Stromfinder Rifle

Posted by Hi Yah on 28 December 2009 - 07:48 PM in Modifications

$7 for 2 tubes? At my Petco it was $7 for 3 feet. How long were each of the tubes?

#260201 At2k Help Needed

Posted by Hi Yah on 30 December 2009 - 06:56 PM in Modifications

I too believe that you busted your check valve. Also, why do you make so many help threads?

#260703 Supermaxx 3000 Overhaul

Posted by Hi Yah on 04 January 2010 - 07:50 PM in Modifications

Nice job. What's next? Sm1k perhaps?

#260983 Breeched Bbbb

Posted by Hi Yah on 06 January 2010 - 06:34 PM in Modifications

Nice jpb. Also if the o-ring is bad on this gun too you could replace it with a Danco #17 o-ring.

#261636 "paintball" Guns

Posted by Hi Yah on 12 January 2010 - 10:22 PM in General Nerf

It looks like a pistol splat on steroids. Also, you mentioned that the spring is longer, but is it stronger?

#261727 Angel Breeched Spring Replacement

Posted by Hi Yah on 13 January 2010 - 09:12 PM in Modifications

Try an Ace 69 spring.

#262014 "paintball" Guns

Posted by Hi Yah on 16 January 2010 - 11:27 AM in General Nerf

Thanks for all the pictures. This gun looks very promising.

#262515 Furyfire/2k Modification!

Posted by Hi Yah on 20 January 2010 - 05:41 PM in Modifications

Nice mod. Could a 3k tank fit inside? If so your ranges should go up.

#262905 The First Look At The Tetrastrike

Posted by Hi Yah on 24 January 2010 - 07:01 AM in General Nerf

It looks like this gun might have some potential.

#262911 Replaced Plunger Tube Disc Shot...

Posted by Hi Yah on 24 January 2010 - 08:34 AM in Modifications

I would recommend putting two Danco #17 o-rings on your plungerhead. This will give you a great seal in the plunger tube.

#263010 Replaced Plunger Tube Disc Shot...

Posted by Hi Yah on 24 January 2010 - 07:19 PM in Modifications

On my bbbb's I use one #17 o-ring and my over pressure valve pops at 7 pumps. I figure 2 should give you a great seal.

#264533 Cpvc'd Air Tech 2000

Posted by Hi Yah on 06 February 2010 - 07:44 PM in Modifications

Try drilling out the cpvc with a 1/2" spade bit. It'll give the barrels an air-gun fit with most hardware store foam.

#264909 Tetra Strike Barrel Replacement

Posted by Hi Yah on 10 February 2010 - 07:48 AM in Modifications

Could you nest PVC over the barrels to protect them and keep em' straight? What are the ranges?

#265805 Blaster Classification/rating System

Posted by Hi Yah on 17 February 2010 - 08:46 PM in General Nerf

What about RSCB's? Would they get rof points of a single barrel, but get the dart capacity of 2-8? And what if you have a turreted gun with inline clipped barrels?

#265806 Zbreech

Posted by Hi Yah on 17 February 2010 - 08:52 PM in Homemades

What are all the sizes of the PVC and the couplings?

#265846 Supermaxx 750 Write-up/improvements

Posted by Hi Yah on 18 February 2010 - 07:38 AM in Modifications

Try making the clip a bit shorter, and maybe nest some copper in it to reduce deadspace.

#265983 Pistol Splat Problem

Posted by Hi Yah on 19 February 2010 - 07:43 AM in Modifications

Wash every down to get rid of the lube. Then, replace the hot glue in the plunger head with goop. Then super glue the head back on. Make sure you lube it with a proper lube.

#266047 At2k Help/fix

Posted by Hi Yah on 19 February 2010 - 07:23 PM in General Nerf

If the pump is plugged the lump of hot glue might have busted your check valve.

#266086 Persuader

Posted by Hi Yah on 19 February 2010 - 10:09 PM in Homemades

How did you rifle the barrel?

#266330 At3k Barrel Help

Posted by Hi Yah on 21 February 2010 - 03:38 PM in General Nerf

Use CPVC that's is drilled out with a 1/2" drill bit.

#266345 Deploy Cs-6 Overhaul

Posted by Hi Yah on 21 February 2010 - 05:28 PM in Modifications

Nice job. But, instead of a hornet tank I would recommend a big salvo tank. Overall, you did a great job.

#266977 My Ls Brass Breech Version

Posted by Hi Yah on 25 February 2010 - 10:22 PM in Modifications

This is a really good idea. I'm pretty sure the angel breech uses 9/16, I like how this uses 17/32 mainly because thats the size of brass I use as my main barrel. And its perfectly air tight because the 1/2 makes a seal with the 17/32 right?
And this is alot less brass.
Nice write up too!

You know that can make an angel breech with 17/32, right? Just size down all the brass.

#267002 Pvc Nerf Gun Rack I Made

Posted by Hi Yah on 26 February 2010 - 07:49 AM in General Nerf

I like it, but the thing I like about peg boards is that they take the guns away from the floor giving you a bit more space in your workshop and they have a low profile. While, this one keeps the guns on the floor. But, other than that it is good.

By content type

See this member's

Sign In