Anyways, its got the works, 12" PETG barrels, Hornet pump, I bypassed the goo-gauge, rear loading turret, 100% air seal, and a few cosmetic mods.
![Posted Image](http://i273.photobucket.com/albums/jj205/shelbyfanss/661.jpg)
The spacer at the end of the barrels is part of the original turret. I sawed off the barrel rings that attached to the center stabilizer, bored them out so the PETG fit snug, and hit it with a heat gun to restore the original plastic color. (I may do a how-to thread on that for those of you who don't know what I'm talking about.)
Other than the paintjob, the first thing you might notice is that there is no hole where the original priming handle once was. I filled it in with a little Bondo before painting, it looks really clean this way!
![Posted Image](http://i273.photobucket.com/albums/jj205/shelbyfanss/662.jpg)
I made the rear loading hole as sleek and clean as possible, I think it turned out good. I don't like the massive gaping holes, I did it just large enough to do its job while still following the curves of the gun for appearance.
![Posted Image](http://i273.photobucket.com/albums/jj205/shelbyfanss/663.jpg)
And last but not least, the goo gauge isn't a goo gauge at all! I made a tiny wave bottle out of a 2" PETG section. I filled the ends with glue, filled half the vile with water, added 2 drops of red dye, and filled the rest with canola oil. I then capped it and put it in. Now I got a super badass wave bottle in my gun. I replaced the goo gauge with the PETG because the goo gauge isn't as clear as I'd like it to be, and the ID is rather small, so the effect is kind of ruined. All in all, it turned out pretty badass. It gets pretty damn good ranges, I'd say I'm hitting around 140' or so, it hits harder than my SM1.5K.
I do contacts you know, so if you want one of these or anything else, just PM me and we'll talk! I also got a huge eBay sale going on in the Sales thread, so if you want one of my guns but you don't want to have one contracted, go check it out before they end!