5162 replies to this topic

[Eik]

Fall Camo Recon

-


chopped up a LSFG to make a shorter barrel attachment

-

[/quote]

Edited by Eik, 26 October 2010 - 04:21 AM.

[NerfRogue83]

Deploy R.I.P equipped.......

[Fome]

Feel free to motivate me to finish this fucker.

It's hard to see but there's 2 barrels at the front there. One is for the PETG-singled longshot. Shoots haaaard.
The other (right below) is for the super hot airgun integration right below the main barrel. No idea where to put the trigger for it though.

[Eik]

The Eikenberry Special


1/2" PVC Coupler'd plugged titan ducktaped to custom stock. Also comes with scattergun attachment.


Fer dickin' around ;D

Edited by Eik, 26 October 2010 - 04:20 AM.

[GreenyNerf96]

Finally able to sign up to Photo Bucket.



Splitfire with PETG barrels and AR removal.



Yeah, its pump handle broke off, the minimization was kinda ugly, but I wall be fixing both of these problems soon enough.



Standard quadshot. I'm singling it soon. Can't be bothered with its inferior 4 shots. Inline here we come. Choo Choo.



Stupid "Star War Air Gun" BBB knock off. PETG barrel.

I only just figured out how to re-size. Ill do it next time. Sorry guys!

I feel like I need to contribute myself a bit more around here, since being a member is a privilege in its own right.

Edited by GreenyNerf96, 11 May 2010 - 06:38 AM.

[sistermol]

My most recent mod. A drain blaster with a pvc barrel until i can get a coupler. The nf is just to show how big it is for those that haven't seen one in person.



My scorpion bow with a nested barrel so it can still shoot arrows.



And my three new nitefinders.

Bottom left has a cpvc barrel and new spring and catch spring.
Bottom right has a marker tube barrel and a new catch spring.
The top is a WIP because I had to leave before I finished, all I did to it was remove the air restrictor.

[popatachi]

95% Done.

Shell modifications coming.
And silencing. This thing is loud.

Write up will follow after that.

[soccerbeast003]

My newly painted Doomsayer:

[PETGrevolution]

This is not my blaster or picture. I take no credit, this was one eBay about a month ago. I wish I won it.
-Rev

[NerfRogue83]

Ok, so I am FINALLY done with the themed PJ on my Deploy. I have been a HUGE transformers(G1) fan since I was a kid, and have made a few TF themed LS's recently. For the Deploy I chose AutoBot Ratchet. I hope you all enjoy. If you have TONS of free time and patience--paint your Deploy. If not, forget it!

The target----



The end result---




R.I.P equipped---




Transform!----

[sistermol]

Just an update on the EaB with tek 3 integration.

I got tired of the tek 3 "exploding" when I would open it (when you open a tek 3, if you arent careful you could move the plunger spring a little bit and it comes loose and cause an "explosion" of parts to come flying out). So I sanded off the epoxy putty that held the side with the screw holes in place and re-applied it making sure to get it in the screw hole, then removed it before it could adhere to the plastic. Doing this made sort of a "mold" for the tek 3 to fit into without it coming loose while it was together, and also made it so I dont have to open the tek 3 when I want to use my other plunger tube, or replace a spring, or just re-lube the tube.

Here are the pictures of what it looks like:



The internals with the tek 3 shell closed.



The "mold" that holds it in.


A close-up of the tek 3 being held in place while the blaster is put together.

Yes I already know it needs sanding down and yes I know I still haven't gotten around to painting it but I haven't had alot of time to do much recently.

Damn Rogue nice job I like it.

Edited by sistermol, 14 May 2010 - 01:59 AM.

[CaptainSlug]

This is not my blaster or picture. I take no credit, this was one eBay about a month ago. I wish I won it.
-Rev

While that is a picture, that is not a modification or a paintjob.

Go away for 6 months.

[Fome]

It fucking rocks!!!11
10 pumps = decent ranges.

[SonReeceSonJensen]

COOOOOOOBRAAAAA!!!


Nice side view.


BAM! 1-1/2” and 1” coup-in-coup for max modularization. Held in by epoxy at the base and a metric butt-ton of hot glue.


Current adaptations: The base of an Ironman Rocket launcher for the three Ironmen I have and a six-shot (megas) adaptor using one of the crazy couplers from www.flexpvc.com.

I wanted to get this in here as soon as possible next to Fome’s post, more adaptations and other fun-inities to come.

[Stud Muffins]

Handcannon

[Mr BadWrench]

love the purple studmuffins.

[hopper055]

First I would like to thank TantumBull for his work with the ms valve. I had to modify the design to make it all fit inside the shell …. Witch I accomplished I just need to gut a clip to put ware the tubing sticks out. The modifications I did to his design are making the air inlet come in threw the tank expansion instead of threw the whole vale assembly and by eliminating this I can now take out the whole piece of cpvc making it easier to exchange springs(I’ll get a pictures of this later because its very hard to explain) . And because of the air coming into the tank threw the expansion I don’t have external tubing fallowing the valve wile it is actuating like TantumBull did

I present the first ( to my knowledge) Automatic Recon. Noobs will go crazy!







Air Inlet




Trigger valve


And just because I made an Automatic recon I built a bayonet for it totally pointless just interesting.

[TheAbused]

Ramona


Christine


Carrie


I hate painting.

[NerfDude1138]

My latest:


Wipeout in purple converted to accept Vulcan chains
Wipeout with my style of new brass breech
Tech Target with my new style of brass breech


The brass breech is attached directly to the plunger tube and it has a pvc collar around the slide part to protect the barrel opening from impact damage.




-ND

[Lt Stefan]

Hell yeah.

Edited by Lt. Stefan, 16 May 2010 - 09:17 PM.

[taerKitty]

Drilled out AR, PETG barrel, bungee-ed. A straightened staple inserted across the diameter of the barrel serves as a dart-stop. The receiver has holes drilled into it for the bungee hooks, which are turned 180 degrees.

Darts are 1-1/4" long with 2 #6 washers. The NF is muzzle-loading, and a stick of hot glue makes a great ramrod. E-taped so it seats snugly in the ammo holder. The rest of it has some box tape around it so it doesn't get nicked up too badly. \

[KaneTheMediocre]

Needs a bit of reinforcement, but works perfectly as it is.

[Zack the Mack]

It's summer break, and that means my mod shop is open for business!
Out with the old...

and in with the new:

Aww, yeah, it's an Arctic Shock Nerf Super Soaker Iron Man!
Top barrel fires unicorns, bottom barrel launches the love of beautiful women.
Pump comes from a Titan, with a tee for ergonomic goodness.

Three-dart brass-breeched inline, McGuyver style.

ZOMGFPSMODEJUSTLIKEMODERNWARFARE2HOWMANYKILLSTILIGETTHEHEARTBEATSENSOR?!!!

Edited by Zack the Mack, 18 May 2010 - 01:01 AM.

[Phree Agent]

My new primary. 4k FTW. My paint quality was poor, but I got the job done.

Edited by Phree Agent, 18 May 2010 - 04:11 PM.

[Lucian]

I realized that I haven't modded much the past month so I went to town on my Tetra Strike



Barrel spacer made by me

How I connected the pump:


Oh and I tried out dry brushing again, along with an airbrushed coat of Silver:

That's not the Tetra that I modded in the previous pictures

Edited by Lucian, 18 May 2010 - 11:07 PM.