5162 replies to this topic

[andtheherois]

I had some time today after my brother's 35th birthday.

[bhajj94]

Ultimate Missile Blast in Longstrike shell (Long Missile Blast)
All that I had to do is cut a small square in the side for the tank to fit, and then sand out the insides, add some super glue, and done.
Ranges: 120-140 ft (singled)
U Mad Bro?



MARIO!!!

[ConservativeBrony97]

@ZackTheMack i know this isn't the best spring combo ever but try using the original spring along with the spring from a buzzbee tek 6. I always use that in my nitefinders and i get at least 55 to 60 ft flat.

USER WAS WARNED FOR THIS POST

Edited by Zorn's Lemma, 03 July 2012 - 12:55 PM.
pictures thread means pictures bro

[bhajj94]

Here is my brother's Titan Integrated into a Maverick shell. Its called the TitMav
Range (hoppered 4 pumps): 120ft

[Gears]

Yolo!

[Snap-On Tools]

Wow. Some of you guys do great jobs on these. Awesome....

Here's my unworthy mod. By the way... Mavericks SUCK. This thing gets around 80ft angled though. Why this ungodly number for a Maverick? Some shit snapped off inside when I was cocking the gun and instant gain of 20ft. Works for me...







Check out my half-ass job.





So that's my contribution. I believe that there is also a similar mod somewhere on this forum.

[zacsdaman97]

'roboman', on 28 Dec 2011 - 12:12 AM, said:

So, my mom gave me an Eliminator for Christmas...


It looks pretty normal...


Of course, it's not. I preloaded the spring with some masking tape, so that it's at full compression when it's cocked.


I also made an aluminum barrel. It has a .485" ID for a nice, tight springer fit. The groove for the O-ring is a few thousandths shallower than the stock one, so the seal is almost perfect.


The seal is so good that I had to install a piece of .032" music wire to prevent the dart from getting sucked into the plunger.

Ranges are decent, around 45' flat with a good dart. Of course, it can go much farther if you dart-punch with it.

http://www.youtube.com/watch?v=1GO1NUEjAEw
And, of course, the obligatory video.

That's awsome for an eliminator, how long did it take to make?

USER WAS WARNED FOR THIS POST

[Green Wing]

Internals Replaced TTG. Great loaner guns as they are super easy to make and shoot 85'-95' flat with Slugs.
Fun to duel wield.

Video for more details and shooting:

[andtheherois]

Sceptors are still cool right?... Fuck if I care, I'll still use it.

I got lazy and didnt redo the plastidip for the grips. I may sometime soon.




All my guns conveniently fit inside a ~16" bag. I achieved my goal.

Edited by andtheherois, 11 July 2012 - 05:54 PM.

[zacsdaman97]

hey everyone. Im new here and new to modding nerf.
This is my first mod and paint job. It's a singled maverick.
mods done: minimised, spring compression + spring addition and paint job.
paints used: for spray paint I used belton molotow, and for dry brush I used "Humbrol" Enamel paint numbers 117 and 84.



hope you like.

Edited by zacsdaman97, 11 July 2012 - 06:38 PM.

[Green Wing]

My Nf rifle with backup At3k tank and rear loading At2k turret.









The NF gets around 100' and the Integration gets 60'-70' flat. The triggers are linked.

Video for firing demo.

[Green8]

My maverick! Has penny mod, AR removal, barrel drop, the rotational mechanism fix, and pegs removed for stefans.


And my longstrike. Just has AR removal,peg removal, and detachable clip mods. I might get an OMW stage one kit for it later.



Also, if you are wondering why the handle of the maverick is missing, I wanted to attach it to the underbarrel of the longstrike for a shotgun-attachment-like thing but I used the wrong stuff to bond it.

Edited by Green8, 12 July 2012 - 09:09 AM.

[MattTheSasquatch]

My Rayven painted with Applebarns Acrylic Bright Blue and Light Gray. The blaster is stock internally. This is my second brush/hand painted blaster. As well as first time painting the Nerf logo.

[richard bown]

My Nerf Stampede, modded and painted in a mass effect style.
May end up adding weathering but not sure yet

https://picasaweb.go...feat=directlink

https://picasaweb.go...feat=directlink

[BritNerfMogul]

Finally found a use for one of the 2 side rails I had to sacrifice for my 2nd generation Pulse Rifle.

Surprisingly comfy, and very solid. The rail is simply screwed to the shell using the existing screw ports in the rail. Now I know that it works, I'm working on trimming the rail down so it sits a little lower on the shell.

EDIT:







Much happier now.

Edited by BritNerfMogul, 16 July 2012 - 04:43 PM.

[leafy]

Recon.....

What's this.. a 2k tank?

Sweet paintjob, 2k tank, sm3k pump, 2 pumps = 100 + ft. Plus it's supa' clean.

Edited by leafy, 16 July 2012 - 05:27 PM.

[bhajj94]

Here is my S.A.R.M. (Singled And Ready to Mingle) It is a singled longshot with k-25 spring replacement that shoots about 125-135ft with the right darts.


Primed


Note: A lot (if not all) of the marks on it were there when I got it at a thrift store.

Edited by bhajj94, 02 August 2012 - 01:23 AM.

[PrincessPeach33]

Here is my Berserker. It shoots about 110 hoppered (4 pumps) and has an airsoft foregrip added for comfort.

[ilikefish58]

Pump-action Retaliator, Blood Angel style



Edit for Elite PAS. I didn't match the blue right, and its going to bother me so I might redo it.

Edited by ilikefish58, 18 July 2012 - 06:04 PM.

[ShaNayNay]

Picked up some Tek 4's from a thrift shop, and for blasters that only have 1.5" of draw, they really pack a punch. With just a CPVC barrel replacement they get a minimum of 45'flat, and up to 70' angled. I added a touch of purple tape for class.

Edited by ShaNayNay, 19 July 2012 - 02:27 PM.

[Ambience 327]

So I finally got around to customizing the PumpSnap I commissioned from Phoenix66.

Totally freehand (and the flaws are less noticeable when you aren't zoomed-in with a camera!) I am fairly pleased with it.

[clownieX]

Something to pass the time.

MODS:
• O-Ring/Seal Improvement
• AR Removal
• "Penny" Mod
• Custom Paint Job

[MrGabeLove]

]so hopper clips works with airguns? sorry im kind of a rookie here.

USER WAS WARNED FOR THIS POST

This topic is for pictures only. Please read the new members guide before posting.

Edited by Zorn's Lemma, 21 July 2012 - 09:40 PM.

[Shoopy]

When I got back from HHNO on Sunday I found a stock Blue and Yeller 4B (in a box, duh). Did it up SVT style. Not the best looking but works great. Classic Schwinn pump and OPRV kicks in great. It's ready for APOC.

[Eraser475]

Belongs in Homemade. My bad.

Edited by Eraser475, 24 July 2012 - 09:41 AM.