#1001
Posted 11 December 2012 - 12:48 AM
Photobucket
Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.
#1002
Posted 15 December 2012 - 04:50 PM
#1003
Posted 16 December 2012 - 08:54 PM
The more the merrier (except if you're a 10 year old with a foam sword. In which case - the fewer the better)
#1004
Posted 17 December 2012 - 12:05 AM
And here's the integration for my own Tornadobow.
Photobucket
Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.
#1005
Posted 17 December 2012 - 01:07 PM
Right, forgot to post this.
One of two brithop-style barrels for Hero and Koree. This picture is from before either was polished, so it's not as shiny as the final products actually are. Still, this is the general idea. I do not intend to sell or make any more, since they're quite time-consuming.
EDIT: This is being dumb. Here is a direct link to the image.
Edited by roboman, 20 January 2013 - 07:04 PM.
Youtube
LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/
#1006
Posted 21 December 2012 - 12:17 AM
30" including barrel.
Kruger and Dunning (1999)
#1007
Posted 22 December 2012 - 03:56 PM
#1008
Posted 27 December 2012 - 09:37 PM
I think this one shoots farther than my first, though I can't figure out why. Here it is with it's older brother.
#1009
Posted 02 January 2013 - 08:26 AM
It did turn out very well though
JackRabbit's Batman PS3.0+ RBPistol combo!
Again, I feel awful for taking so long. Hope he enjoys it!
20:45 Talio penis in vagina
20:45 Talio fin
#1010
Posted 02 January 2013 - 06:44 PM
I guess I never posted this here.
Made it at the start of break. The tank holds about 3 cu. in. of air, and plugs directly into the wye. It's sealed and held in the wye with an O-ring, and the front section of the tank extends all the way to the internal face of the wye, so a bunch of the dead space is removed.
Not selling them yet. My plan is to eventually include a built-in shutoff valve in the hose barb, so when you pull the pin, the air supply is stopped. That makes the tank itself about the simplest possible semi-auto system that doesn't waste air. The current version doesn't have that yet.
Youtube
LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/
#1012
Posted 04 January 2013 - 08:57 PM
3d-printed pistol made by my brother Klaiviel and originally designed by Landru. It works just like a nitefinder and it's quite powerful to boot. It shoots stock darts, with elite darts being the best.
Link to thingiverse page: http://www.thingiverse.com/thing:16726
Edited by Mehku, 04 January 2013 - 09:01 PM.
#1013
Posted 06 January 2013 - 08:51 PM
#1014
Posted 10 January 2013 - 11:35 PM
Next my plusbuw. pretty normal except has a [k25] and 1 inch reduced length. Also it is shown with my clear breech.
My next homemade will probably be a papbow or a rainbowpump.
Edited by quertyman, 10 January 2013 - 11:36 PM.
#1016
Posted 18 January 2013 - 12:18 AM
Kruger and Dunning (1999)
#1017
Posted 20 January 2013 - 12:48 PM
#1018
Posted 20 January 2013 - 06:58 PM
Three small plunger heads with a counterbored hole in the front face to accept a 6-32 pan head screw with an o-ring underneath to seal that hole. Each weighs only 8g, and the hole on the other side is sized to accept 3/8" square rod (.53" diameter, same as the diagonal distance on the square).
Youtube
LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/
#1019
Posted 21 January 2013 - 06:27 PM
BullPAC 2 and 3 (3 has the red 3d printed handle)
Next level inverted candied curried bacon wrap. The bacon's on the outside, so your tongue touches it's tasty goodness before it hits the bread in the middle.
Low angle 3d printed wye. Required a lot of TLC to get cleaned up and sealing well, but it shoots rubber domes and AMIORS (so far) while pointing straight-ish.
#1020
Posted 24 January 2013 - 12:15 AM
#1021
Posted 27 January 2013 - 12:11 PM
Kruger and Dunning (1999)
#1022
Posted 31 January 2013 - 05:02 PM
Edited by DartSlinger, 31 January 2013 - 05:03 PM.
#1023
Posted 31 January 2013 - 09:33 PM
Nothing special, just a ball valve air gun. I used a small Gatorade bottle as my tank. I used an In-Line Ball Valve because it is much easier and smoother to open and close.
Edited by nerfpower97, 31 January 2013 - 09:40 PM.
#1024
Posted 31 January 2013 - 09:49 PM
^Prepare to get shrapneled.I used a small Gatorade bottle as my tank.
Finished this a few weeks ago.
A RainbowPacbow -the bow
8 inches of draw, [k25]. Supah RoF.
#1025
Posted 02 February 2013 - 08:25 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users