Jump to content


Photo

Homemades Picture Thread

Photos of Homemade Nerf Guns

1306 replies to this topic

#1026 cheerios

cheerios

    Member

  • Members
  • 396 posts
  • Location:Yorkville
  • State:Illinois
  • Country:United States

Posted 03 February 2013 - 06:01 PM

Finally the best shell ever is getting the TLC that it has always deserved. It is the most comfortable shell and it fits a 2.25" plunger tube perfectly with 5" of draw.

It shoots as far as Ryan's plusbow. Shoots through cardboard with slugs but not with AMIORS or silicone domes.

Posted Image

Edited by cheerios, 03 February 2013 - 06:02 PM.

  • 0
22:46- jakejagan :Ryan, did you hear that Zeke's BBBB made N9 bleed?
22:47- Zorn :BONUS

#1027 Pointman9

Pointman9

    Member

  • Members
  • 131 posts
  • Location:Akron, Ohio
  • State:Ohio
  • Country:United States

Posted 04 February 2013 - 01:14 PM

Finished up my first AAbow today.

Posted Image
1 1/4 PT, 12 inches of draw.
  • 0
There is no such thing as overkill. There is only cost efficiency.

#1028 Jgolden

Jgolden

    Member

  • Members
  • 3 posts
  • Location:Draketown
  • State:Georgia
  • Country:United States

Posted 05 February 2013 - 01:40 PM

Posted Image
My pull back Snaps with Preeminent heads, half of a screen door closer spring and a HD 25 pound spring in both
Ranges mid 80's

I can't get it to show

You had a few too many IMG tags in there. Fixed.

Edited by Carbon, 05 February 2013 - 02:04 PM.

  • 0

#1029 ilikefish58

ilikefish58

    Member

  • Members
  • 86 posts
  • State:Texas
  • Country:United States

Posted 07 February 2013 - 11:00 PM

Ladies and Gents, I give you the OH SNAPbow. Could be a bit cleaner, but I was hurrying to get it done by HAMNO 2.2 on Saturday.
Posted Image

Posted Image

Posted Image
  • 0

#1030 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts
  • Location:North Brunswick
  • State:New Jersey
  • Country:United States

Posted 09 February 2013 - 10:11 PM

Finally remembered to upload some pics to my photobucket.

Posted Image
Posted Image
Posted Image

My Desk is a mess. This is for Defender7, which still needs to be shipped >_>
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#1031 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts
  • Location:Dulles International Airport
  • State:Virginia
  • Country:United States

Posted 16 February 2013 - 12:01 AM

Secured the front of my blaster with maple syrup 3D printed brackets
Posted Image
  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#1032 modsfornerf

modsfornerf

    Member

  • Members
  • 85 posts
  • Location:New York 11220
  • State:New York
  • Country:United States

Posted 17 February 2013 - 08:52 AM

My completed rainbowpump.
Posted Image
Posted Image
Pumpsnap 3.0 style priming.
Posted Image
I fixed up my pumpbow.
Posted Image
It now has a [k26] spring that hits full compression.
Posted Image
[img]http://i1239.photobucket.com/albums/ff519/heavyweight2/DSC00815_zps44f6b9c8.jpg[/img
  • 0
Check out my youtube channel My link
Also check out my blog: website

#1033 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts
  • Location:North Brunswick
  • State:New Jersey
  • Country:United States

Posted 17 February 2013 - 10:26 PM

Griever's +Bow.

Posted Image
Posted Image
Posted Image

If he doesn't like it, It can become your +Bow ;)
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#1034 makeitgo

makeitgo

    Member

  • Members
  • 216 posts
  • Location:Ottawa, Ontario, Canada
  • State:Ontario
  • Country:Canada

Posted 19 February 2013 - 01:49 AM

My latest home made and invention. Still some kinks to be worked out and the priming grip needs some work but it's functional.

*As of yet, still unnamed.

Posted Image

Bull Pup design.
Pump action "pull" back.
Full 7.25" draw.
Total length; 20.5" (main body, stock, plunger tube, plunger rod and barrel.)

Primed.
Posted Image

Ready to fire.
Posted Image

Size comparison;
Posted Image

Posted Image

Write up coming as soon as I finsh it.
  • 0
"...he is one speedy bastard." ~ Cheyner

#1035 DoorMatt404

DoorMatt404

    Member

  • Members
  • 5 posts
  • Location:14883
  • State:New York
  • Country:United States

Posted 19 February 2013 - 01:02 PM

So this is my latest "just for fun" homemade rifle. Its a one shot gun that gets 100+ feet, as I said just for fun and a secondary is needed with this one. I can do a more detailed description later if anyone wants, just ask me. It is 43 and 1/2 inches long with a k18 spring. And yes, it leaves welts. Click on the pictures to enlarge them.
Posted Image
Posted Image
Posted Image
Posted Image

Edited by DoorMatt404, 19 February 2013 - 01:07 PM.

  • 0
If it's wroth shooting once, then its worth shooting twice.

#1036 modsfornerf

modsfornerf

    Member

  • Members
  • 85 posts
  • Location:New York 11220
  • State:New York
  • Country:United States

Posted 23 February 2013 - 04:56 PM

My rainbow pump rev.2.
Posted Image
Posted Image
With a round omni-directional plunger rod
Posted Image

Edited by modsfornerf, 23 February 2013 - 04:56 PM.

  • 0
Check out my youtube channel My link
Also check out my blog: website

#1037 TCDHOMEMADES

TCDHOMEMADES

    Member

  • Members
  • 19 posts
  • Location:Roseville MN
  • State:Minnesota
  • Country:United States

Posted 24 February 2013 - 06:31 PM

One of my new primaries for Marchtacular 2
full [k26] spring, 100% air seal, this thing shoots laser beams.

Posted Image
Posted Image
Posted Image
Posted Image

Edited by TCDHOMEMADES, 24 February 2013 - 11:40 PM.

  • 0
TCD

#1038 TCDHOMEMADES

TCDHOMEMADES

    Member

  • Members
  • 19 posts
  • Location:Roseville MN
  • State:Minnesota
  • Country:United States

Posted 25 February 2013 - 12:01 AM

Snap pistol I made about a week ago.
6 inches of a [k26] spring, 100% air seal. shoots about 80 with slugs

Posted Image
Posted Image
Posted Image

Edited by TCDHOMEMADES, 25 February 2013 - 07:03 PM.

  • 0
TCD

#1039 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts
  • Location:Dulles International Airport
  • State:Virginia
  • Country:United States

Posted 26 February 2013 - 08:38 PM

Found some magical 1.5"x1.33" nylon tube, which fits inside 1.75"x1.5" polycarb tube, allowing me to snugly convert 1" PVC OD (1.315") to 1.5" SDR 35 PVC ID (~1.74").

Posted Image

Priming action now super smooth from the pump grip part — just need to redo the catch plate now

Edited by Zorn's Lemma, 26 February 2013 - 08:39 PM.

  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#1040 koree

koree

    Member

  • Members
  • 311 posts
  • NerfHaven Supporter
  • Location:Philadelphia
  • State:Pennsylvania
  • Country:United States

Posted 27 February 2013 - 05:44 PM

I brought some PakD clips from Singapore. Andtheherois and I made some homemades for them.

Top: my clip blaster prototype 00

Bottom: Andtherherois' I'm too fucking tired to give it a name blaster.

Posted Image

Video of Hoongfu testing it out.



Currently has an intentionally short barrel 4" cpvc barrel for use at Gridcode and is hitting 75' every time. Can probably get the ~100' mark with a proper barrel for more typical nerf wars. Very critical improvements to come include adding a mechanism that will allow me to move the trigger and grip closer to the magwell as well as a proper stock.

Edited by koree, 27 February 2013 - 05:48 PM.

  • 0

#1041 DartSlinger

DartSlinger

    Member

  • Members
  • 222 posts
  • Country:United States

Posted 01 March 2013 - 08:43 PM

Posted Image

Don't use Bondo for a SNAP catch ramp. It's too soft to work. Epoxy putty is much harder.
  • 0

#1042 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts
  • Location:North Brunswick
  • State:New Jersey
  • Country:United States

Posted 01 March 2013 - 09:29 PM

I brought some PakD clips from Singapore. Andtheherois and I made some homemades for them.

Top: my clip blaster prototype 00

Bottom: Andtherherois' I'm too fucking tired to give it a name blaster.

Posted Image



Finished mine and made it look pretty. Named FAL-CON. FAL(3)(the main component)- Clip Optimized Nerfing (The idea that clips are actually viable in NA wars).
Posted Image

Edited by andtheherois, 01 March 2013 - 09:30 PM.

The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#1043 makeitgo

makeitgo

    Member

  • Members
  • 216 posts
  • Location:Ottawa, Ontario, Canada
  • State:Ontario
  • Country:Canada

Posted 02 March 2013 - 01:40 PM

Now more tacticool!

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
  • 0
"...he is one speedy bastard." ~ Cheyner

#1044 cheerios

cheerios

    Member

  • Members
  • 396 posts
  • Location:Yorkville
  • State:Illinois
  • Country:United States

Posted 02 March 2013 - 11:39 PM

Zorn's FAL 2 became my FAL 2. The plunger tube exploded so I had to fix that and reinforce the priming handle.

Posted Image

Posted Image

Posted Image

Posted Image
  • 0
22:46- jakejagan :Ryan, did you hear that Zeke's BBBB made N9 bleed?
22:47- Zorn :BONUS

#1045 makeitgo

makeitgo

    Member

  • Members
  • 216 posts
  • Location:Ottawa, Ontario, Canada
  • State:Ontario
  • Country:Canada

Posted 04 March 2013 - 12:43 AM

...and now it lights up!

I replaced the 90 degree elbow with a T and added LED's that light up the barrel, hopper and plunger tube. My iPhone can't do this justice. It's sooooo Tacti-Too-Cool in real life. Multi-Orgasmic!!!

Posted Image

Unprimed.
Posted Image

Down the barrel.
Posted Image

Down the hopper.
Posted Image

Primed. Note that the plunger tube lights up.
Posted Image

Close up.
Posted Image

From the back.
Posted Image

http://www.youtube.com/watch?v=bBn98s-dKHo
  • 0
"...he is one speedy bastard." ~ Cheyner

#1046 Nerfomania

Nerfomania

    Member

  • Members
  • 207 posts
  • Location:Canton
  • State:Georgia
  • Country:United States

Posted 05 March 2013 - 08:51 AM

RBPistol #8 for Ray.

Overall shot
Posted Image

New trigger design
Posted Image

and just one more overview so you can look at dat smoooooth handle. :)
Posted Image
  • 0
20:45 Talio I'll have the talk with you
20:45 Talio penis in vagina
20:45 Talio fin

#1047 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts
  • Location:Dulles International Airport
  • State:Virginia
  • Country:United States

Posted 07 March 2013 - 12:22 AM

http://www.mcmaster....lyethylene-tape

This stuff is amazing. It lets you take a bunch of does-not-fit tubes and makes them into slides-super-well tubes.

Posted Image
  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#1048 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts
  • Location:Dulles International Airport
  • State:Virginia
  • Country:United States

Posted 08 March 2013 - 12:51 AM

Posted Image
Posted Image
  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#1049 Jgolden

Jgolden

    Member

  • Members
  • 3 posts
  • Location:Draketown
  • State:Georgia
  • Country:United States

Posted 11 March 2013 - 12:02 PM

Posted Image
(Hoping that it's not huge)

My Pacsnap, with four inches of draw and mid 80's to low 90's range.
  • 0

#1050 Pointman9

Pointman9

    Member

  • Members
  • 131 posts
  • Location:Akron, Ohio
  • State:Ohio
  • Country:United States

Posted 11 March 2013 - 03:16 PM

Further experimentation with my short AAbow and tagger hopper have led to this development.
Posted Image
Since normal SCH 40 doesn't work as the dart storage area, I originally had to use thinwall PVC or 3/4 CPVC, but I got tired of not being able to see the darts. The clear pipe on there now is a 7/8" OD, 3/4" ID polycarbonate tube from McMaster. It needed to be sanded at both ends before it would fit though. I also originally tried using a ball valve with this assembly, but darts kept getting sucked back into the plunger tube, so that black thing at the tip of the hopper is a dart door. And it even works... somehow.
  • 0
There is no such thing as overkill. There is only cost efficiency.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users