103 replies to this topic

[TimberwolfCY]

I'll be e-mailing you a couple pics I have of "exploded-view" internals. They are both already modded, but I think they'll still be pretty useful.

[cheesypiza001]

If you're going to put credits next to picture links at all, you've got to keep them RIGHT.

I went through about 160 pictures and credited almost all of them. If I made a mistake or two, please keep in mind that I am only human. Please also Pm me letting me know what is incorrect. Thanks.

On another note, I have not uploaded the last few pictures that I have received for entry in the directory. However, I will make sure to upload them shortly.

[Magic]

I noticed the SM2K internals weren't up. It's understandable, because it's a pretty rare blaster. I decided to open it up, and fix my trigger problem, so here's an internal picture.



I also have a powerstrike, and I didn't see internals for that either, so I'll get on that when I have some time.

EDIT: I'll have to fix the IMG link when I have time as well.

DOUBLE EDIT: Fixed IMG link.

Edited by Magic, 17 April 2009 - 03:02 AM.

[Mr BadWrench]

Kung Fu Panda Commander Crossbow
(Panda XBow)

Mattel / DreamWorks
Plunger dimensions: bore=1+3/64ths, stroke=3+13/32nds

Me like....

JSB a request "please sir can I have some more?"

I would like a picture of the plunger rod at an angle where I can see the catch?

I don't know why I'm bothering you this will be my next purchase anyways.

Don

[atomatron]

Because I find the Big Bad Bow internals Pic lacking...

It could be a little less blurry, oh well.

[cheesypiza001]

UPDATED

If I missed anything please either post here, or PM me.

Thanks.

[Heat Signature]

Hey, just to let you know, you're missing the Lanard Clip Shot(Fast & Furious) which is also name the Air Zone Dual Shot.
If someone could add some internal pics of that gun it would be great.

[Ryan201821]

Maximizer



Plunger tube

[atomatron]

What was the stock ammo of the maximizer, oompa loompas?

[Mr BadWrench]

Buzz Bee Water Warriors Cricket Squirt gun

http://s520.photobuc...nt=SS851697.jpg



Don

[Ubermensch]

AT20:

http://i291.photobuc...47/IMG_2710.jpg

http://i291.photobuc...47/IMG_2711.jpg


Dark Knight Ultra Blast:

http://i291.photobuc...47/IMG_2972.jpg

http://i291.photobuc...47/IMG_2971.jpg

http://i291.photobuc...47/IMG_2973.jpg


"Just Toys Rapidfire":

http://i291.photobuc...47/IMG_2930.jpg

[Zachfrog]

Here's the internals for a gun I found at the Dollar Store:
http://www.flickr.co...N04/3669739624/

[Keith]

Buzz Bee Berserker internals.







Linky to larger version

I'll be working on a write-up for some basic mods soon.

[SPV999]

Raider CS-35 Internals:

Overall:

http://i53.photobuck...er/IMG_2355.jpg

Close up (at rest):

http://i53.photobuck...er/IMG_2356.jpg

Close up (cocked):

http://i53.photobuck...er/IMG_2358.jpg

[k9turrent]

SupaSplat TriggerBlast



The Semi-suto works by the trigger pulls on a "hammer" that releases at full trigger pull to hit the back of teh pin opening the valve open 1/32" for less than a half a second.

[k9turrent]

The Semi-suto works by the trigger pulls on a "hammer" that releases at full trigger pull to hit the back of teh pin opening the valve open 1/32" for less than a half a second.

Funny you should mention that...
(hornet)
The Mad Hornet can be described in almost the same words.

Is that good or bad?

[Mr BadWrench]

I think if you just wanted to have something thats not a NF these are ok, but they have no potential whatsover beyond that.

the plastic is weak and they are small

http://i520.photobuc...pg?t=1255205094

Don

[Mr BadWrench]

legit double post



posted thumbnail cause I am at the upper limits fo my camera for resolution.... click on the pic for high detail.

Don

[cheesypiza001]

A major update has just been completed. If you have internals pictures that you do not see on here or any mistakes that you have found in the directory, please PM. Thanks.

Edited by cheesypiza001, 29 November 2009 - 09:11 PM.

[Blue]

So, I finally decided to mod my ST9K... NOT! It doesn't hold air at all, and I figured it'd be best to fix this while remaining stock. I took a bunch of pics. The key to the pump cap is popsicle sticks. I got one wet, trying my best not to scratch this thing, and wedged it under the cap. I did the same to second, and circled from the first one, pushing up. It eventually popped off very satisfyingly. The other cap is at the end of the barrel thing, just get your gun apart and wiggle the two brown pieces and it will pop off. The gun has some pretty awesome flashlight activator stuff too. The tubing connectors screw right off as well if you decide to replace the tubing, which I may do since mine seems to have dried up. I didn't know this at the time, but if you just want access to the pump, the yellow handle and that cap are the only things holding it in. Not saying this is a good idea, but you might be able to pop off the pump cap by just yanking on the pump. Anyways, here are the pics of the internals. Post here if you want more. Check out the album for more pics of both guns and the flashlights: http://s339.photobuc...ullTheDog/St9k/

General overview:


Close-up on the trigger cam:


Flashlight activator stuff:



Tank:


Different perspective:


Caps:


Flashlight activator stuff:




Removed internals:



Tubing caps unscrew:

[cheesypiza001]

Supermaxx trigger cam engineering:

(Bob's pics/explanation of the trigger cam)

I hope this works...



(It's a GIF animation so wait until it loads)

[jubjub517]

Might as well throw this out.

Edited by jubjub517, 03 October 2010 - 08:50 PM.

[jubjub517]

Bob's right.

And Mr. Yetti, your defective.

Edited by jubjub517, 03 October 2010 - 08:48 PM.

[mr yetti]

[quote]This is when I placed two pennies down the two pumps.[quote]

Deffective pennies!!

[plubby]

Slight problem my friend...
Where is the Furyfire?