- NerfHaven
- → chefdave's Content
chefdave's Content
There have been 219 items by chefdave (Search limited from 25-December 96)
#233620 Do You Remember?
Posted by chefdave on 31 May 2009 - 04:45 PM in General Nerf
#232962 My Big Blast Mod
Posted by chefdave on 27 May 2009 - 09:50 PM in Modifications
#230588 Longshot Cf Boltsled Reinforcement
Posted by chefdave on 16 May 2009 - 01:21 PM in Modifications
Very nice. I did the same thing except I used two layers of fiberglass. Does carbon fiber have similar strength to fiberglass?
I'm 99% sure carbon fiber is stronger than fiberglass.
#230577 Longshot Cf Boltsled Reinforcement
Posted by chefdave on 16 May 2009 - 12:31 PM in Modifications
Materials/tools:
Woven carbon fiber(can be found at most hobby stores)
Epoxy
Wax paper
Scissors
Exactoknife
Take your carbon fiber, cut it into 2, 1.5in squares.
Coat the inside of the bolt with a layer of epoxy.
Apply the carbon fiber square.
Apply another layer of epoxy on top on the carbon fiber.
Press on a layer of wax paper, squeeze out all the excess epoxy.
Repeat for the other side.
After The epoxy is completely dry remove the wax paper and cut away the excess carbon fiber.
There you have it, quick and easy. Sorry for the lack of more pictures, they seem to have been lost some where in cyberspace.
Questions, comments, flames?
#230549 Secret Shot Ii, With Tank Mod.
Posted by chefdave on 16 May 2009 - 10:39 AM in Modifications
#222046 Ebay Filter (tweaked)
Posted by chefdave on 06 April 2009 - 05:56 PM in General Nerf
*edit* linked the filter *edit*
#220503 Mav-strike
Posted by chefdave on 29 March 2009 - 04:33 PM in Modifications
If you want to defend yourself while reloading, just attach a shotgunned bigblast to the bottom... No one will get close to you
Have fun carrying that around.
Not the whole shell, just the pressure chamber.
#220500 Mav-strike
Posted by chefdave on 29 March 2009 - 04:30 PM in Modifications
#220222 Your Worst Nerf Related Injury
Posted by chefdave on 28 March 2009 - 12:15 AM in General Nerf
Modding would had to be when I left the glue gun on for half an hour. I then proceeded to glue something, it was so hot, it dripped off the gun and landed on my barefoot. I ended up having to run upstairs and shove my foot into the shower. Another 5 minutes later I had to pull off about 1 Square inch of glue bound with my skin.
#217809 The Most Painful Gun
Posted by chefdave on 13 March 2009 - 12:11 AM in General Nerf
#217706 Longshot Breakthough (takes Stress Of The Boltsled) (writeup's Up)
Posted by chefdave on 12 March 2009 - 07:05 PM in Modifications
#213919 ..
Posted by chefdave on 21 February 2009 - 02:07 PM in Modifications
#212808 I Present To You The Hefty Clip
Posted by chefdave on 16 February 2009 - 05:05 PM in Modifications
#212743 Crossfire 2000
Posted by chefdave on 16 February 2009 - 12:42 PM in Modifications
*edit* you finished just as I posted *edit*
#212739 I Present To You The Hefty Clip
Posted by chefdave on 16 February 2009 - 12:36 PM in Modifications
So lets get started!
This will allow you to use stefens in your longshot.
Tools and materials:
-exacto nife
-epoxy putty
-rectrangular wood dowel
-possibly a dremel
First you need to open it up, pry open the tabs with an exacto knife or cut them off with a dremel.
After you have opened it, measure and cut your wood, glue it on at the appropriate positon according to the length of your stefens. Make sure you measure and glue it on straight,
This is where I origanly stopped, it broke after 1 use
Wimpy, wimpy, wimpy.
Hefty, hefty hefty:
Reinforce the wood with a large ammount of epoxy putty, make sure there is a small gap in between the two pieces of wood when the clip is reassembled.
Now, take the slider piece and cut it so there is about a 1/32th of an inch gap between it and the wood.( If you do not do this properly you will not be able to fire the last shot in your clip!)
Grab the spring and glue it in so that the spring is flush with the open edge of the slider.
(sorry couldn't get the camera to focus properly)
Reassemble it and your'e done!
This clip is much more durable and, in my opinon, easier to mod!
Questions? Comments? Flames?
#211952 Everything You Should Never Do
Posted by chefdave on 13 February 2009 - 10:29 AM in General Nerf
what's worse is if you listen close they mention that they had to put something metal into it so it would fire
No, if you actually listened he said he put metal in the jaket, not the gun.
#211537 How Do You Open The Cs Clip Up.
Posted by chefdave on 11 February 2009 - 07:14 PM in Modifications
#206673 Marvelouse Salvo Help?
Posted by chefdave on 26 January 2009 - 07:04 PM in Modifications
#206641 Fire Fly Mod
Posted by chefdave on 26 January 2009 - 06:20 PM in Modifications
Pictures:
#206452 Schoolwide Nerf Tournament
Posted by chefdave on 25 January 2009 - 09:40 PM in General Nerf
#206349 Schoolwide Nerf Tournament
Posted by chefdave on 25 January 2009 - 05:18 PM in General Nerf
#206107 Sf Help
Posted by chefdave on 24 January 2009 - 11:30 PM in General Nerf
Or I thought you could attach the barrel, apply negative pressure (I won't say how do to risk of being added that hilarious quote to my signature, while playing with my butthole) to the barrel and pump it hoping to seal the chamber.
Good luck
#206001 Nite Wiinder
Posted by chefdave on 24 January 2009 - 04:34 PM in Modifications
just for the record the game is GAAAAAAAAAY!!!!!!
Just for the record your post is INTERNET POOOOOOP!!!!!. Seriously, unless you have something usefull to contribute don't post, oh and read this.
#203602 I Have A Recon Dream...
Posted by chefdave on 15 January 2009 - 05:09 PM in Modifications
#203276 Lbb Amount Of Pumps
Posted by chefdave on 14 January 2009 - 10:53 AM in Modifications
#202675 New Barrel Material And More!
Posted by chefdave on 11 January 2009 - 06:10 PM in Modifications
Otherwise interesting find, not quite as cheap though as most PETG, and is probably lacking in quality
#201529 Airgun Problems
Posted by chefdave on 06 January 2009 - 08:51 PM in Modifications
After not using airguns for a couple months, most of them have developed leaks. First my Air tech 2000 leaks out of the base of the pin at the end of the tank. My Big Salvo leaks slowly out of the barrels of 3 of the four blast chambers. My Titan cannot hold enough air to shoot a dart 30 feet, but I cannot locate the leak(s). Lastly my converted water gun leaks out of all the parts except the barrel and pump. There may be a few I am forgetting. Can someone help? Thanks (in advance).
The airtech is probably shot, but the other ones should be able to be fixed by spraying with silicon spray and superglue.
*edit* Hey look my 200th post =) *edit*
#200985 Projectus
Posted by chefdave on 04 January 2009 - 12:49 AM in Modifications
#199218 Sidearm Holster
Posted by chefdave on 27 December 2008 - 02:43 PM in Modifications
#198288 Painting Prep
Posted by chefdave on 23 December 2008 - 12:37 PM in Modifications
Wait, you can remove paint with hot glue?
Oh that is so added that hilarious quote to my signature, while playing with my butthole!
On topic Generaly you don't have to remove the stock paint because it is not paint at all, it's the color of the plastic.
#195884 Making A Magstrike Pistol
Posted by chefdave on 13 December 2008 - 03:24 PM in General Nerf
Once it either works, or conclusively does not work, then I will spill the entire story, including plenty of pictures.What is that a picture of?
Until then, I would prefer that most people ponder the possibility of whether I might actually be that good with photoshop.
Looks like you put a flashflood supersoaker into a sonic bazooka shell.
#189258 Leaking At2k
Posted by chefdave on 12 November 2008 - 10:55 AM in Modifications
#185178 Longshot Carbine
Posted by chefdave on 23 October 2008 - 07:46 PM in Modifications
#184872 My Doomsayer
Posted by chefdave on 22 October 2008 - 12:29 AM in Modifications
- NerfHaven
- → chefdave's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·