So lets get started!
This will allow you to use stefens in your longshot.
Tools and materials:
-rectrangular wood dowel
-possibly a dremel
First you need to open it up, pry open the tabs with an exacto knife or cut them off with a dremel.
After you have opened it, measure and cut your wood, glue it on at the appropriate positon according to the length of your stefens. Make sure you measure and glue it on straight,
This is where I origanly stopped, it broke after 1 use
Wimpy, wimpy, wimpy.
Hefty, hefty hefty:
Reinforce the wood with a large ammount of epoxy putty, make sure there is a small gap in between the two pieces of wood when the clip is reassembled.
Now, take the slider piece and cut it so there is about a 1/32th of an inch gap between it and the wood.( If you do not do this properly you will not be able to fire the last shot in your clip!)
Grab the spring and glue it in so that the spring is flush with the open edge of the slider.
(sorry couldn't get the camera to focus properly)
Reassemble it and your'e done!
This clip is much more durable and, in my opinon, easier to mod!
Questions? Comments? Flames?
Edited by chefdave, 16 February 2009 - 12:39 PM.