Hoceky's Content

#214326 +bow: Diy Thread

Posted by Hoceky on 22 February 2009 - 09:34 PM in Homemades

Does the thickness tolerance matter if the thickness is 1/4 and 1/8? In the above picture the polycarbonate is not the same part# as the one on the part list. Correct? I would prefer if CS replied to this. Thanks.

Edit: Replying to your post Splitlip, does it matter what kind of polycarbonate you order from Mcmaster just as long it's 1/4 and 1/8 in thickness?

#250290 A Nice Add On For Your Nerf

Posted by Hoceky on 13 September 2009 - 02:26 AM in Modifications

I want one.

#193209 Air Gun Integrations

Posted by Hoceky on 01 December 2008 - 12:24 AM in Modifications

I can use the slide to pump it.

Do you mean the DTG cocking handle?

#193221 Air Gun Integrations

Posted by Hoceky on 01 December 2008 - 12:41 AM in Modifications

That would be a rediculously short pump-stroke, and you would probably have to pump it ALOT just to fire one shot. You would have to find a way to lengthen the travel of the DTG's slide for it to be effective.
I'm guessing I'll have to elongate the slits on where the slide rests.

Then you may as well make a new cocking handle, because you are ripping up a piece of plastic that has no structure whatsoever. You will make a mess of the handle if you do that.

#193205 Air Gun Integrations

Posted by Hoceky on 01 December 2008 - 12:13 AM in Modifications

I think blue still has two of them for $55.

#193211 Air Gun Integrations

Posted by Hoceky on 01 December 2008 - 12:28 AM in Modifications

That sounds awkward to pump or do I just not get it?

#194341 Airtech On Amazon

Posted by Hoceky on 06 December 2008 - 03:12 PM in Off Topic

All I can say is, WOW. :angry:

#192659 Another Black Friday Story

Posted by Hoceky on 29 November 2008 - 01:44 AM in Off Topic

This was in the other black friday de-brief topic as well.

#201750 Anyone Else Have This Problem?

Posted by Hoceky on 07 January 2009 - 09:44 PM in General Nerf

This hasn't happened to me. I am always sure to grab the back of the plunger before dry-firing so I can slow it down (I have an older, non-recalled version).

Same here.

#192134 Ar Removed Made It Worse?

Posted by Hoceky on 26 November 2008 - 06:44 PM in Modifications

On my first LS I put a gaping hole in the side of the plunger tube when removing the AR witha screwdriver.

#208278 Arsenal Organization Tips

Posted by Hoceky on 31 January 2009 - 03:18 PM in General Nerf

Here's my closet small aresnal organization thingy.

Posted Image

#248825 At2k Internals Integrated Into 1-1/2" Pvc

Posted by Hoceky on 27 August 2009 - 08:15 PM in Modifications

This thing looks awesome. Sorta like the raider's pump action but the handles are backwards.

#197893 Auto Tommy 20 Pistol

Posted by Hoceky on 21 December 2008 - 10:00 PM in Modifications

Wow cool, similar to Ubermenschs (is that how you spell it?) How did you clean up the cuts on the end?

That is german for Superman.

#190842 Barrel Length For Sm1.5k?

Posted by Hoceky on 19 November 2008 - 10:17 PM in Modifications

I use 6 " for alot of my air guns.

#173901 Bbb Plunger Tube

Posted by Hoceky on 31 August 2008 - 11:51 AM in Modifications

Well I finally got my bbb open after cutting through tons of glue, and I want to do a spring replacement. But I can't get the tan plunger head off the rod for some reason to get to the spring. Can anyone help me?

Be a man, pull it off.

#193215 Binding Wood And Pvc

Posted by Hoceky on 01 December 2008 - 12:34 AM in Homemades

Goop or Epoxy should work.

#193216 Binding Wood And Pvc

Posted by Hoceky on 01 December 2008 - 12:35 AM in Homemades

Goop or Epoxy should work.

#194913 Bitchslayer

Posted by Hoceky on 09 December 2008 - 12:58 AM in Modifications

Oh snap.
I better pray my dodging is better than your aim.
Otherwise next Marymoor is going to be a world of pain...

How well does the clip work? I've never had much luck with deodorant clips...

The clip works the same way Angels BBB does.

#194910 Bitchslayer

Posted by Hoceky on 09 December 2008 - 12:49 AM in Modifications

Holy crap that thing has alot of power! :wacko:

#192650 Bleeding Bullet

Posted by Hoceky on 29 November 2008 - 12:58 AM in Modifications

Instead of flaming of what is already a crisp, why don't you give the kid some construtive critisism. All noobs make silly first attempts at concepts.

#247147 Browning Automatic Rifle

Posted by Hoceky on 15 August 2009 - 05:16 PM in Modifications

Looks sweet. Just like a WWII BAR(for a Nerf Gun). One question though, is the paint blue or is the lighting making it look like a really light grey. Thanks.

#204869 Calgary/ West Canada War?

Posted by Hoceky on 19 January 2009 - 09:29 PM in Nerf Wars

I have done some minor mods here, mostly AR removals, and my personal best an AT2k(no re barreling though)
though probably will use my longshot,(ARs, and weak spring added).

EDIT: ~~Where is parkland? South Calgary? If it is I may not be able to come.~~
It is in the south, so I can't come sorry.

What community do you live in Nuuk? I live in Edgemont if you know where that is.

#204897 Calgary/ West Canada War?

Posted by Hoceky on 19 January 2009 - 10:46 PM in Nerf Wars

Attention! small war at the school in parkland, tuesday 20th after exams, more details tommorow.

So..... Where's the details?

#204114 Calgary/ West Canada War?

Posted by Hoceky on 17 January 2009 - 01:12 PM in Nerf Wars

I'd be down for that. But I woudn't count on us having it in the spring though just in case we have another late winter.
Then again we could rent a gym or something.

Same Here. We would need to do it in June sometime because we couldn`t risk a May snowstorm. Put me down.
EDIT: Here is a small list of people in the area.

Calgary-Alberta
Hoceky
Kyrativ
Killim Spree

Edmonton-Alberta
duit14
Elementofnguyen

Vancouver-B.C.
min.tee
Zerves

EDIT2: I e-mailed Falcon about Season of Foam already and the only western Canada area they will be stopping at is Vancouver.

#182848 Chaos

Posted by Hoceky on 10 October 2008 - 05:17 PM in Modifications

The thing looks.....um.....unstable. Maybe you should try to support it in some way. You could use more PVC on the sides as a suggestion.

#183004 Chaos

Posted by Hoceky on 11 October 2008 - 11:34 AM in Modifications

I'm going to say this once and once only. It's BASED off fenix' chimera, but the design of his is not fit to my liking. I like to pump the gun from the back, and it's more comfortable to me then the Chimera. I've used fenix' chimera at APOC, and it was great but mine is more comfortable for me because I have a damaged shoulder. This thing is fucking STURDY as hell. I made sure that I glued all over the PVC, and that it can withstand a fairly good amount of pressure. The point of this topic is to show has good Fenix' blueprints are. Everyone should make a basic Chimera, but customize it yourself which is what I did.

Thanks, I understand now.

#194534 Closed

Posted by Hoceky on 07 December 2008 - 11:56 AM in General Nerf

Why do you feel the need to post in something thats over a year old? Please do not necro.

#194415 Contra

Posted by Hoceky on 06 December 2008 - 07:35 PM in General Nerf

That is very strange but at the same time it's awesome!

#185818 Cpvc Sch80 Or Omc Petg?

Posted by Hoceky on 27 October 2008 - 08:50 AM in General Nerf

I can answer your question TB. FA 24 used to sell red foam that fit OMC's Petg like a glove. He does not sell it anymore.

#187890 Crazy Prices You Bought Your Guns

Posted by Hoceky on 06 November 2008 - 06:31 PM in General Nerf

I got an old style SM1500 at a garage sale for a dollar.

#208102 Crossfire Help

Posted by Hoceky on 31 January 2009 - 12:42 AM in Modifications

You can always hammer a screwdriver that will fit into the back of the plunger until it comes out. This is what I did to my friends CF.

#209032 Double Nf Enhancment

Posted by Hoceky on 02 February 2009 - 08:18 PM in Modifications

EDIT- sorry about the pics if you don't have an account on this website, but it was the only way for me to get them to work.

Use Photobucket.

i have a problem with my fire fly, it wont catch the plunger file:///D:/Users/Antares/Media/mods/CIMG1901.JPG

I've had this problem before. Try turning the plunger stick around then it should catch

Funnier YouTube video:

Ok, that sir, made my day.

Anyway, dude really? You laugh when an innocent creature is killed by hunter carelessness? I mean really. Thats just fucked up. I am in no way a PETA activist, but thats a bit cold. Just think of if it were a cat or a small dog or your penis? Would it be funny then?

Oh I'm sorry BN, I never saw it that way. Would you like me to ask the admins to lock/delete this topic?

#194490 Funny Youtube Video

Posted by Hoceky on 07 December 2008 - 01:48 AM in Off Topic

Can an admin delete/lock this? Please.

Hoceky's Content

By content type

See this member's

Sign In