Also I cut that one up, took out the AR's and stuff and its not an all bad last resort weapon
Ok so the objective is to make this:

I liked the ideas in the silencer directions:
http://nerfhaven.com.../zero_silencer/
But it does not include the stock extension ring , like Captian Slug does in the pictures of his shotgun mod:
(middle of the writeup)
http://nerfhaven.com...?showtopic=7336
Using this ring will allow me to remove this at any time, which has innumerable benefits
So here are the elements:

I have 2 major questions for everyone:
Should I do on the inner part of the barrel to scale the size down
What goes in this grey area?:

The other question being what is the best way to connect the stock extension ring to the entire assembly.

Ideas Ive had for both of these, are for the inner part, continually descending pieces of PVC at the front and the back of the assembly to keep it light so it would look like this:

What are you thoughts on this solution?
For the ring my idea was to use a larger piece of PVC over the 1.5inch piece and over the orange ring to add strength with glue all around that
I dont like that solution it means buying more PVC that I will only use a small part of, and it also changed my ascetic
I understand many people might suggest not using the stock barrel, changing this to brass, and swapping out the internal barrel for brass or CPVC but for me this is just an ascetic mod. I'm very new to modding NERF so I dont want to do that many large internal changes. I plan to remove the AR's and add a NF spring later. But myself with only $15 in my pocket and a big war event a month away I don't want to destroy my gun.(haveing been recently fired I also am unemployed at the point)
I hope that this can be used as a springboard for other barrel extension mods, maybe one with brass or with CPVC something better then what comes with the nerf. The idea of a detachable barrel appeals to me, just not the one that comes with the gun.