Jump to content


jediaelthewise

Member Since 22 Jul 2008
Offline Last Active Nov 04 2015 08:25 PM

Posts I've Made

In Topic: Magstrike Internals 101 & Minimization Tutorial

20 February 2015 - 07:41 PM

Two things
One, you should get you a Jewelers/Razor saw
.http://www.super-hobby.com/products/Saw-CS-3.html
Two, if you insist on using a knife type tool, you should get a plexi-glass cutter, it works by dragging it across the seam like you did with you utility knife.
http://s120.photobuc...a932fd.jpg.html
Either of these offers quicker cutting and less chance of stitches.


Thank you for the tool suggestions! That is very helpful!

In Topic: Magstrike Internals 101 & Minimization Tutorial

20 February 2015 - 04:13 PM

Would you be able to attach a paintball CO2 tank to that or would it require a different type of valve?


I have searched but have had a lot of trouble finding the right valves. I personally do not recommend using paintball tanks though because they run at several thousand PSI and rapid firing can cause rapid cooling of the tubing which can cause them to become brittle and break, leading to possible whipping lines, which are not fun. The parts are hard because you basically need to go from several thousand PSI to just 55, which is not really practical. Air pressure modding can be dangerous so mod at your own risk.

Here is a link to a page where you can find information on the tank I use as well as parts and price list:

Please click here for air tank parts list

In Topic: Twin Magstrike Build

22 March 2014 - 04:36 PM

Full HvZ Loadout & Demo

In Topic: Twin Magstrike Build

22 March 2014 - 01:11 PM

So yeah, if it runs solely off the air tank, the zombies are screwed. You just have to be careful not to spray a whole clip. I remember you posting about this a while ago. You're running a 1 gallon air tank, right? One thing that I think would make it better is if you turned the magstrikes upside down. When they're empty they would automatically fall out. You would have to pick up all your clips after a round but I think it'll be worth it.


Yes I am using the tank system. I will update this thread with my full load out build at some point later.

I do like the reasoning behind putting it upside-down but I think it would be counteracted by fast and hard running. I fear the clips would fall out if I jolted too hard. I like the idea, I just personally think from experience playing the game it'll fail in actual execution.

In Topic: Twin Magstrike Build

22 March 2014 - 12:37 PM

Haha, you are going to own those zombies, now you just need to make a bigger clip. Nice mod man, maybe not the cleanest, but definitely practical.


I like to use normal size mags to reduce the footprint of the gun and to prevent catching since they hang. However, I do wear an army vest and carry up to 15 magazines.

Posted Image