Jump to content


RetaliationXL

Member Since 30 Jul 2016
Offline Last Active Aug 17 2016 10:08 AM

Posts I've Made

In Topic: (survey) Lubing areas?

16 August 2016 - 08:33 AM

I have a qestion about types of lubes. Wich is better for sealing? And wich is for moving parts?

I still do use white lithium grease for all. Usually White lithium or silicone is just fine for all nerf lubricanting application.
Some people might adding silicone oil while lubed by si.grease for plunger sealing if the o ring seal is quite tight.Because white lithium wear off more quicker but more slippery.

In Topic: (survey) Lubing areas?

16 August 2016 - 02:42 AM

Different ways have pro and cons:

Lube all moving surfaces:
-Minimal/no wears(even plastic to plastic contact point do wears due to friction)
-messy and dust trapping

Sealing areas only:
-less messy
-less dust traps
-plastic area wears(i.e bolt sled guiding rails)

So I want to see that which option mostly users maintaining currently

In Topic: Asking about the white lithium grease...

31 July 2016 - 10:08 AM

Usually it is, yeah. That's why I'm confused about this particular case.


Ya...Im suprised too abt this haha,I try to check on next maintainaNce to see...thanks!!( if possible I post a pic abt it ...( new user..my acc is under limitations

In Topic: Asking about the white lithium grease...

31 July 2016 - 09:38 AM

The grease is probably reacting with whatever they made the padding from (probably silicone). To be safe I'd wipe it off and replace it with silicone grease to see if that fixes it.


usually WLgrease is fine to use right? The colours mostly is from plunger tube, so I think no problem with the padding? But the tube dont hv any fades or Visible corrosion

In Topic: EAT OMW need air seal?

30 July 2016 - 10:23 AM

Yes you will need the tape. I found it helped by 10 extra feet.


Thanks,will make a try on next maintainance