Brimstone Omega

Here's my Modulus with integrated Deploy stock, Retaliator barrel with integrated LSFG sight and barrel, because it gives L33T ranged and uber accuracy, plus the 3s Lipo,  18AWG silicone wiring, high current Microswitch and Xt60 connector helps a touch with that. 

Super happy with how this turned out and glad to finally have had a use for that waist of space Deploy. 

I also relocated the sight rail back a fee inches so it can be used more ergonomically when shouldered with the longer stock. Doing this also opened up the jam door for easier access. 

Here's a bunch of random stuff. Enjoy

 IMAG0137.jpg   76.98KB   138 downloads

 IMAG0135.jpg   64.66KB   137 downloads  IMAG0072.jpg   78.07KB   135 downloads  IMAG0074.jpg   68.7KB   135 downloads  IMAG0090.jpg   52.89KB   127 downloadsattachment=77:IMAG0091.jpg]  IMAG0059.jpg   110.4KB   134 downloads

I've been slacking on posting some of my work, too busy modding I guess. Without further ado here's my modded Rayven, I integrated a Firefly Tech battery tray into the left side shell, gives it a bit more response on spin up time, plus I feel it balances out the opposite side of the blaster.

I will post some other stuff over the next few days too, just wanted to get that one up because it's one of my more simple ones.

Damn... I wish I had seen this sooner. I would have sent you the bipod legs just for shipping and would have even painted them up for probably what you spent on them from that ebay link. Sorry i didn't see it in time. I've got dozens of those LS legs laying around. Anyways, if down the road you do decide to do the integration, yes it will mess with the cosmetics of the pj, but depending on how into it you want to get it wouldn't be all that difficult to fix in the end. If you didn't want to touch the paint on the Longshot itself then I would recommend painting the CycloneShock first, then mating it to the Longshot.

Again, I apologize for not seeing this sooner, and if you have any questions about paint please feel free to pm me at anytime. I have years of experience in modding and especially in paint work, from minis to models to mods.

A quick word of advice on getting the paint to adhere to those bipod legs if you do paint them; they are made of the softer plastic, not the hard easy to prime stuff of shells. Vinyl dye WILL NOT bond to it without a very good sanding and wash in an acetone or some other type of chemical thinner. Rub it down first, then sand it progressively down with a quick like 120 grit, then 240, and finish with like a 320 or so.

If you dont do this the paint will just chip up and make for one sad panda.

Awesome, love the new look and features. Thanks for all the work you've done!