Jump to content

  2. → Viewing Profile: Topics: Epic Pie

Epic Pie

Member Since 16 Jan 2012
Offline Last Active Aug 24 2013 05:11 PM

Topics I've Started

AR's

02 August 2012 - 09:26 AM

I have noticed in the years I have been modding, that most write-ups have you remove the blasters' air restrictor by using a long flat-head screwdriver and hammer. There are a number of better ways to do this then that time intensive way. I like to use a Butterfly bit(spade or flat bits are another name) to drill it out. A 1/2 or 5/8 bit works really well. Also, I sometimes use a regular wood bit and a bit extension to reach into the depths of the bolt. I have seen people use pipe cutters to chop it in half and then glue it back together, but that is insanely time intensive, even if it is cleaner. Can you guys share your methods?

Airzone Ammo

29 May 2012 - 12:44 PM

Are the Air Zone Quickfire Gatling Blaster and the Air Zone punisher's ammo belts interchangeable, and can you connect then to form longer belts? Also, which one performs better, and are they both flywheel systems? Thank you.

Leaking SSPB

01 May 2012 - 03:48 PM

The other day I was modding my Secret Shot Pocket Blaster (re-barreled, tank expansion) and it got a leak. I Dremmelled a hole in the side of the blaster's tank, and put my finger over it, no leak. I hack-sawed off the stock barrel, and hot-glued a 3/4in x 1/2in bushing on the stub, and put my finger over the hole again, then it leaked out the barrel. I epoxied the replacement tank on, and it (the tank) does not leak, it is coming out of the barrel and the "blast button". Can you guys help me fix the problem? Or is it just shot?

Painting

17 April 2012 - 07:08 PM

For painting Nerf blasters, what will stick better, or at all; acrylic, oil, spray-paint, or something else?

NiteFinder Spring catch

02 March 2012 - 01:24 PM

Is the NiteFinder's spring catch strong enough to take a stock spring, plus a Hyperfire's spring?

  1. NerfHaven
  2. → Viewing Profile: Topics: Epic Pie
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·