Jump to content

Epic Pie

Member Since 16 Jan 2012
Offline Last Active Aug 24 2013 05:11 PM

Posts I've Made

In Topic: The Official Internals Directory

18 August 2013 - 03:50 PM

Rough Cut pictures, noticed there weren't any.

There, hope that is helpful.

In Topic: Springs!

27 May 2012 - 07:43 PM

Hey guys, I am new to modding, but i know the basics, taking Ar's out, taping those air holes on the plunger tubes, and I know theres lots more out there I can do. I allready did my basic mods for my Maverick, but i want a spring replacement, and i don't know what kind to get... what kind of springs are out there? What would be good for a Maverick? what are the types of springs which are usable for Nerf guns?


This would be a fantastic topic. The main thing with spring replacements though, is you have to be careful with how much load you put on the plastic components, or they will eventually break. Best of luck to you.

In Topic: Stock Dart to Stefen Mod

05 May 2012 - 03:32 PM

If you were to cut the dart slightly shorter, you could use the extra foam for a second dart.

I meant how you used the leftover rubber head for the tip.

In Topic: Stock Dart to Stefen Mod

05 May 2012 - 12:22 PM

I hadn't thought of this method; I just pulled the top off mine, cut them into thirds, and hot-glued a BB into them. Nice idea though. It isn't good that you only get 1 Stefan per dart however.

In Topic: Leaking SSPB

02 May 2012 - 07:37 AM

Ok, so the problem is probably caused by some debris in the tank. I can Dremmel another hole in the blaster's tank wall, and run water through it, out the output hole, while holding the blast button; and then, instead of patching it back up, I can give it another tank expansion! Great, thanks all.