5162 replies to this topic

[oodalumps]

[sublimedom777]

Preliminary Name: VelociRapture














Name suggestions? Questions? Comments? Flames? PM me.

Edited by sublimedom777, 10 July 2009 - 11:45 PM.

[Bullshit Dragon]

Goddamn are some of the paint jobs you guys are doing cool! Well, just some quick stuff from me this crack around.

Redid my NF, replaced the too-short brass barrel with an internally couplered CPVC. Ranges promptly jumped form low 40's to mid 60's. PM me with questions.


Bought a Sawtooth from danielbeaver. Great man, it shipped in excellent condition, only complaint is that about three days after I got it, all the stickers except the MaxForce logo fell off. So, instead of fretting over how it would look aesthetically ghetto, I took the time to PAINT the stickers on! Mid 50's to lower 60's.

Mods done: relubed, covered the "vent" with tape, replaced the spring, and CPVC'd the clips.

Final Product:


Detail shots:

[jerm78]

[TantumBull]

An update on that 2k turret I mentioned for Kitty's 3k.


Glue's curing right now, so I haven't tested it out yet. Standard mods have been done: airflow increase, re-barreled. It connects to a coupler via PVC. The PVC has a slot cut out of it to make room for the rod, spring, and cap. 1/2" brass is nested inside the PVC which makes an airtight seal with the turret and the back end of the PVC.

[pjotrkuh]

My own recon, never thought i could get my hands on it!

Added a spring I found on the back, removed the goddamn &^%$##^& air restrictor.

And put a stronger spring on the catch, still doesn't "catch" properly though

[Slayer of OnE]

Here it goes... my first post...

oh and by the way, I used to be Puppy-§layer, but I was a forum whore then, and my ways have changed.

While I was gone:


























And finally, I got clever. I cut little segments of 1/2 '' CPVC and hot glued them together (straight) to create a rack of 8 stefan holders to give it that shotgun feel.




What to call it???

The Javelin

going on sale soon atNerflovers.

[Nerf Bros]

While camping with my family I picked up a couple of busted guns from my cousins. While I can fix the hyperfires with my eyes closed, the Magstrike is out of my league.

The two problems I've found with this gun are:
1. Air leaks in tubing, will be fixed with plumbers goop (That's why it's disconnected)
2. The pump is impossibly hard, and the bladder barely fills. The flexible handle might be some part of the problem. Air leaks? Or is this normal?
I could probably find an answer through searching, but asking is easier. If you have tips, email me.
Thanks in advance.
Also, this is my bros inline clipped sm1500 fail, it had problems with shotgun loading and has since been barreled with PETG.

[nerfer63]

stormbringer styled ls witha seriously crappy pj



attachments in order from left to right small 4, big 3, nade launcher, and singled attachment


Yeah it looks crappy but functions very well.

[diamondbacknf1626]

I recently got ahold of a new style 1500, thanks to Galaxy613, not knowing what to expect. I've always had old ones, and heard that the new ones just don't compare, comfort-wise. Personally, I like it. To me, since it's already bigger, I decided it'd be cool to be able to shoulder it. So I added a removable stock:


I did it by using a female threaded 1/2" conduit adaptor attached to the back cap of the blaster (A screwdriver can still get through and un-screw the cap, allowing you to easily open the blaster without digging through hot glue or epoxy by the stock attachment point.

On the stock is a 1/2" male threaded adaptor.

Then, I used pipe insulation foam cut in half to cushion the stock.

12" PETG barrels, shoots lazer straight. I love it. My darts are fairly loose (I can blow them down if they don't fall down on their own, which they tend to). And I can hold 4 darts in the original amo holders on the back (one forward and backward in each holder). Hits around 90-100 consistently. Plenty for this kind of gun.

Edited by diamondbacknf1626, 12 July 2009 - 06:58 PM.

[bigred1rifleman]

Some of these are no longer in existance, and most of them I don't use anyway. I just thought that I should throw some of my crap out here. PM me with questions.

Finn

[louiec3]

Well time to show off a beautifully spent Sunday.

Before



One doomsayer with six inch brass barrels and broken rotational mechanism.

After



One singled Rapid Fire Shotgun with 1/2in PVC coupler epoxy puttied, super glued, and bolted in place, 12 six inch brass barrels, and a turret that is FUBAR.



The bolt just goes straight through the shell, coupler, and plunger tube.
Even though It looks crooked the bolt is straight.

Ranges are 80's to 90's flat but I could get more with a better barrel.

[flashdude]

not sure if i showed this before, but here goes.
one of my first paint jobs, still working on the gun though.


it still hasn't been modded in any way, other than the double clips. oh wells.

edit: BIG EFFIN IMAGE

Edited by flashdude, 13 July 2009 - 12:13 AM.

[stickfigure91x]

110' Average. Looks like it should be Boba Fett's, don't you think?

[diamondbacknf1626]

Comission #3. Supertech 9000.




Merz is a very, very lucky guy.

Modding Service Thread.

[Knud-Hansen]

Something I threw together. It is obvious where the inspiration came from, but I did my own design which is to complicated to make a write up for. However, it is very likely that I will be selling this, so keep your eyes peeled for a sale thread.

Photobucket is failing on me, so I apologize for having to post a link.

http://i354.photobuc...01/Photo232.jpg

Edited by Knud-Hansen, 13 July 2009 - 11:33 PM.

[nerfer63]

I did an ls for my friend

[sublimedom777]

My AT2.5k (let me know if that is inappropriately named). Thanks for the help folks, but I wound up needing to replace the tank and went with a 3k (hence the averaging of the numbers to get 2.5, hardy-har-har)




Also, my sister and I painted her Recon

[Ice Nine]

That's an AT2K pump on the top one.



Current Jobar setup. I hold the barrel in front of the nozzle. Breaks one ten, no problem.



New-edition Blastfire with replaced plugged pump. A bit leaky, pump is getting replaced again later.



Partially modded TTG. Has the plunger rod and spring from the old version for a little extra power and pull. Later it's getting a partial +bow spring, longer plunger tube and rod, and an SCH80 scrap as a coupler for PETG.



New-edition 1500 with PETG turret. It's going to get brassed later.

[Flaming Hilt]

The paintjob for my Recon, nothing terribly special but at least worth posting. The N-Strike logo has since been sanded off and painted over.

Still needs a name. I will probably engrave it, for the sake of trying something new.

[Salmon]

My couplered Supermaxx 500, about 5 inches of 9/16 serves as the barrel:

And a little preview of a WIP I'm modding for Francesca:

Again, sorry for the horrible pic quality, these guns are a lot prettier in person.

Edited by Salmon, 15 July 2009 - 04:41 PM.

[CaliforniaPants]

What I use for wars, really happy with the paint on the PAS.
PM me if the pics are huge and I'll resize them.

[Jumping Nacho]

Cool hu? yea, thats me, and for those people that are going to call me 6, and suspend me, I am 13 years old. Enjoy the pic though!

[CrackerJak]

My NiteManta:

[Ice Nine]

Pssh, Mantaing is passé.

I give you... THE SEX PISTOLS. (Quote Homestar.)



Oh yeah, they both work.

Edited by Ice Nine, 03 July 2010 - 10:30 PM.