5162 replies to this topic

[atomatron]

My Green Supermaxx 3000 with CPVC barrels:



Link to the thread.

Edited by atomatron, 05 May 2009 - 04:51 PM.

[Fome]

CPVC barreled rattler with rubberized grips. Shoots surprisingly well.
Range as per request: average of 45 ft with ramrodded stefans.





AR removed, FBR filled (silencing?), industrial spring, re-lubed NF.




And last and certainly least...

My DS, modified with CPVC and electrical tape to be rear-loading without shells. Took me about 2 minutes.
Shoots a little farther than the stock DS, but with much more ease of use.

Edited by Fome, 06 May 2009 - 08:04 PM.

[alextwin007]

My PAS with a breach, and primary for two wars so far.

[Ice Nine]

Splitfire-esque gun I made for the sole purpose of mounting on my plusbow; expect some polycarbonate sheeting to be built around the top of the handle and holes drilled for quick-release pins. Shoots eighty, and hits seventy with a two-dart load in each barrel.

[Zorns Lemma]

[alextwin007]

Here are some more of my modded guns.

My trusty 2k’s

More pictures coming up soon.

[soccerbeast003]

New mod:

[BritNerfMogul]

An old photo, so I'll update it when I find my camera.

My mere's Leg Winchester.



The paint now finished and protected.

Edited by BritNerfMogul, 18 June 2009 - 07:23 PM.

[Glint]

Just a little project I've rolled with:

[b00m13]

My first Pumpshot Gun.
I was so excited... at first... but then in the end... I was a bit disappointed.
The results were great as expected, but, the whole experience was so short/fast.
I just wished it could have lasted a bit longer (STFU anyone of you thinking "that's what she said").

[Tigadee]

My very first integrated front gun LS:

-

-
Aliens Colonial Marines-style LS (inspired by BritNerfMogul):

-

-

[SPV999]

Yays, first post.

If these pics are too big I'll edit with smaller versions later.

Steam-punked Mav-Titan (w/Titan pump and interchangeable 1" female-thread barrel):



Sunlight Heart (Scout w/sizable light on the front... just because)



Recon (AR removed, two LEDs in front: green when finger is on the trigger, red when pulled enough to fire)



Vulcan (AR removed, I/O switch replaced, barrel replaced with Maverick cylinder and LEDs):




Barrels (Shotgun, arrow, micro, ball, rocket/zoom-o shotgun):

[Vinnie D]

My trusty recon, which I've dubbed "Recon Regenerate," because the first recon died in production, and was reborn using parts from a second recon. Aside from the paint job, I've done the following to it.
Pen mod to reduce dead space, powerstock-like mod built into the plunger cover, by using a long cover with a short plunger to create enough space to embed a nitefinder spring for more power. Basically a power stock while allowing it to remain in pistol configuration. Because of the increased spring power I doubled the catch spring to hold it. I've also removed all locks, shortened the trigger stroke, shaved down the boltsled a little for smoother ammo progression, and lubed up the clip spring. It pretty much never jams now.

I also put a white LED book light into the dead space below the barrel. It's great for illumination and blinding. Also those dayglo orange darts really light up at night, making shots look quite cool.Lastly the handle is weighted a little for better balance. Also made for it a Duct Tape holster with extra clip pouch.






I'd post a full writup except that at this point, I have no intention of opening it again, so no internals.

[Axelion burnout]

Two "one pump" AirTech2000s. They still need some brass, but they are both functioning well.

[CrackerJak]

My first longshot integration.




Works really great, but hard to prime. Probably, because I added a nitefinder spring to it.

Edited by CrackerJak, 10 May 2009 - 01:23 AM.

[wisdom000]

[quote="wisdom000"]Ok, as promised, better pics of my vulcan...









I also repainted my Recon. I hated it in all black, looks much better now I think.

.



And my girlfriend bought me a doubleshot, woot.



When I got the vulcan, it came with 2 longshots, I love the pulse rifle look, but decided to go with gray to match the recon for the first...

[wisdom000]

But for second I stayed with the PR style, but I tried my hand at some advanced cosmetic modding. Wanting a fully modular LS, I removed the foregrip bit, as though I were going to do a fg integration, and instead glued a rail on there (taken from the recon barrel extension) and I covered up the hole with a cover of a hand held game I got from mcdonalds.



Then I set to work on accessories.



The first accessory is just the top front half of a ls fg, it doesn't do anything, it just looks neat to me.



I kept the top half from one of the other FG's to make a loser barrel extension. I had seen this done before, however, I haven't seen anyone add a rail to it, not have I seen anyone do a removable bipod... (recon target light mounted under the ls as well)



And here is the bipod mounted to the LS.



And of course it never would be complete if I didn't add the FG intergration...



The problem with that was, the connection mech for nerf accessories is kinda weak and wobble, I fixed that for the fg by inverting the leftover rail from the recon barrel extension, now it fits smooth and tight.

[Icespartan 1114]

My firpike. (3k in PVC)



Thank you Joe, and ice for the help.

[ace of nerf]

Goldpike- Make your pictures smaller. Pleasums.

Singled LS. Painted dark green. Lots of modifications.
Double O-Ring
PJ
Rail Cut Off
Scope Relocated
Iron site on top of scope
AR-15 Spring addition
Padded Plunger head
Reinforced Catch
Singled with cpvc
Added Ammo holders/ Bullet holders
Reinforced stock

[Axelion burnout]

Starburst (The Nerf Ballgun)





You have no idea how long that took. So much glue.... everywhere.

Edit: Some people wanted links.

#1

#2

Edited by Axelion_burnout, 12 May 2009 - 05:20 PM.

[sig]

My whole arsenal.

http://s562.photobuc...s/ss61/tyrolee/

Edited by sig, 11 May 2009 - 03:13 PM.

[CoasterDynamix757]

Thanks OMC











And many others...

[nermac21]

heres my nitefinder mod its not that good.i added the coupler after i had finished the mod so i hust sawed of some of the barrel and hotglued on a coupler.Paint jobs badddddd http://thumbs.freewe...2991&size=thumb

[SonReeceSonJensen]

Man I love this blaster! A plugged Sonic Bazooka with a tri-barrel attachment in my ‘team colors’ (someday, I swear, I will have a team).

Ranges: used only in the office so far, 7 pumps puts three stock micros against a wall 40’ with little arc. 18 pumps put a hole in a map pinned to the wall with two whistlers and a tagger.







"singled"

[jerm78]