5162 replies to this topic

[sam]

They cannot, I've found all of mine (3) on the internet. Actually I dont thing PETG requires a lot of dremeling, since it has a larger OD that 9/16 brass it should fit into the barrel stubs nicely, not to mention be incredibly light.

[SirTofu]

Have you ever put petg in the turrets? I had to sand the suckers out. I was using vipers petg.

[St Jebus]

new picture 5 posts below (bottom gun)

Its a few simple modifications I did for one of my AT3Ks. Its a barrel replacement and adjustments to the trigger system.
I am going to paint it and add something to make the barrels strong enoguh to withstand a fall.
Four days ago the gun fell 1.5 metres to concrete and the barrels got bent. Luckily there were easy to take off, repair, and re-attach. The barrels are only connected at the base and sides by glue, so I'm thinking of adding a cylinder-type thing around them... It will be done in a day or so, so people may then be able to understand what I mean. I will replace this photo when the gun is painted & fixed.

new picture 5 posts below (top gun)

This is another AT3K mod to make it have much better range and accuracy at the cost of the rotating turret (actually, it kind of broke first). The gun can use two dart sizes - micro and mega stock/stefan. It does that by having a removable barrel inside a larger non-removable barrel. The ladder sight isn't on in this picture. It has non-reflective acrylic paint because my battlefield of choice is in forests north of Toronto, where there are lots of rocks and trees, and its easy to be a sharpshooter with all the places to hide. Its a lot easier when you blend in obviously.

EDIT -----

Most of my barrels are made out of PVC. The second has an inner regular white pvc tube and an outer PETG tube, while the first used black PVC meant for use in garden sprinkler systems... Its easier to cut but just as strong and smooth as regular PVC.


The Simple AT3K improvement mod gave the first gun a range of 60-67 feet after 4 pumps.

The second gun, with only one barrel, is at full capacity after two quick pumps, but like most AT3Ks it leaks air due to the anti-tank-explosion thing. So, I use 3 pumps; 2 before, 1 right before the shot. The gun uses two ammo sizes so:

After 3 Pumps
Mega stock dart - 58 to 62 feet
Mega Stefan - 60-66 feet
Micro Stock dart - 70 feet
Crappy Micro Stefan - 68 feet - Im guessing a properly made micro stefan would get a range of at least 70 feet, hopefully 80.

Edited by St Jebus, 08 August 2006 - 01:26 AM.

[sam]

what did you use for barrels on you AT3Ks?

[murakumo32]

I like what you did to the case. It has hints of the P90. What material did you use to mod the case?

[Arcanum]

I'll throw in my Browning Automatic Rifle aka B.A.R.



Originally this was a buzzbee rapid fire rifle, but i did some crazy cosmetic mods

Edited by Arcanum, 30 July 2006 - 09:10 PM.

[taz22]

that thing looks sick dude. very good job

greats

i want to know where i can buy nerf guns in holland

[tcorr911]

i want to know where i can buy nerf guns in holland

You can usually buy them anywhere that sells toys.

[St Jebus]

Heres an update of two of my nerf guns, painted to suit the environment (not to look flashy for a big public event). I got the barrels fixed for one gun so they won't break so easily, and put in two missing screws, that for some reason weren't put back in after I modded it.




Notice the bullet near the guns - its not real. I'm not modding firearms too
It actually fits a nerf gun like a mega stefan, but with a lot less range and a lot more pain. I have a bunch of them for a model machine gun prop I'm working on.

[PiMpDaDdY]

Thats my super modded at2k. It has the stock, a handle on the left side and I also have a silencer and a stripper clip for faster reloading. I can get consisitanly achieve ranges from 90 to 95 feet with 12 pumps.

Edited by PiMpDaDdY, 28 November 2006 - 09:25 PM.

[NiteWalker]

Ok, Im going to post 2 of my mods on here and remember Im new to modding.



1)My BBB is modded like Angel's with a breech and a deodorant clip. It's almost done, but I have to fix a few things. The barrel looks crooked because I took this picture at an angle.

2)My NF is Crayola-ed and has a SSPB integrated in it. I put a piece of 3/4 cpvc over the crayola to make it more accurate. The ugly yellow duct tape is for grip. IT also holds the front of the gun (where the SSPB is) together.

Edited by NiteWalker, 07 August 2006 - 07:18 PM.

[NOT Ninja Loser]

My bbb, I will have my other guns up later.

Edited by Pineapple, 17 August 2006 - 04:23 PM.

[NOT Ninja Loser]

this is my lbb

PINEY EDIT: Fix your pictures, then re-post them. You're messing up everyone's page view, especially mine.

[NiteWalker]

I have 4 things to say to you Ninja Loser:
1) You really aren't supposed to post twice in a row. You can just use the edit button.
2) Could you please resize your pics? They are kinda big.
3) Is that marker on your guns?
4) Why is there duct tape on your BBB barrel and on your LBB pump?

Besides the marker and the duct tape, your mods aren't bad at all.

Edited by NiteWalker, 12 August 2006 - 05:06 PM.

[meiser5]

You took the words right out of my mouth Night walker. Please read this Loser, before you post like this again.



Meiser----

[Pineapple]

Roadblocker....being reborn.

Had to tear it down since it developed a tank leak. Figured to change the whole works. Plus, I'm getting tired of reading about everyone's Longshots being modded.

I may use the plastic box on top to hide the RSCB loader. 7 shot SM 5000. Back to micro stefans.

I'm documenting this build.



-Piney-

[Falcon]

I'm getting tired of reading about everyone's Longshots being modded.

Same here.

Nice overhaul, piney. Back to micros? Good choice. The western persuasion compells you.

[joeyaglr444]

Cpvc barrel modded M92 Beretta

Night-Pistol
uhhh sorry i was in a hurry couldnt resize enjoy

[NiteWalker]

This is my favourite pistol: The Nf Raging Bull (named after the Taurus Raging Bull gun which looks sort of like it)

Features: 7-8 shot "clip" capacity
Ammo holders that contain 4 darts.
Mostly black for night time battles and I left some yellow duct tape, so that people know it's a toy.

Ammunition: 3/4 of an inch stefans with a bb-sized wieght in it.

Range: Only about 40 ft. flat, but I think I can fix that by putting a better seal or it might be that the weights in my mini stefans are too heavy.

Carrtoon gets all of the credit for the "clip" mod.



Question: joey did you integrate a gun into the beretta or is it just a completly different gun?

Edited by NiteWalker, 21 August 2006 - 10:41 PM.

[joeyaglr444]

This is my favourite pistol: The Nf Raging Bull (named after the Taurus Raging Bull gun which looks sort of like it)

Features: 7-8 shot "clip" capacity
Ammo holders that contain 4 darts.
Mostly black for night time battles and I left some yellow duct tape, so that people know it's a toy.

Ammunition: 3/4 of an inch stefans with a bb-sized wieght in it.

Range: Only about 40 ft. flat, but I think I can fix that by putting a better seal or it might be that the weights in my mini stefans are too heavy.

Carrtoon gets all of the credit for the "clip" mod.



Question: joey did you integrate a gun into the beretta or is it just a completly different gun?

My freind it is indeed a totally different gun ound it at a toys toy toys.

[SirTofu]

My version of falcon's nf. With a strong spring, this thing shoots 70 feet or so. This was a great concept.

[trogdor65]

This is my Longshot frontgun integregated with an At2k, and air restrictor removed.

I used hot gun and tape to hold it on, and need something better what might work? Could I use caulking? This is my first integregation so I didn't hotglue would suck. Pm me or something if you wanna help.

Edited by trogdor65, 29 August 2006 - 11:20 AM.

[heifty]

This is my modified titan:

[Falcon]

I must say, props, tofu. That's probably the closest I'll ever seen someone get to replicating my new fav. spring pistol. The turret sags a little bit, and you could gain some range by miving it a tad bit closer to the ari output (rest the back of the turret against the face of the ammo holders). Otherwise, great job.

Joey; what sort of ranges does that beretta get? It looks pretty awesome, and it's still bringhtly colored (ie. no cops shooting you...)

[Black Blade]

Nothing amazeing but theres one of my crossbows.