Just panted and moded an old tac red dot site.
I cleared out the insides to fit a cheap mini flashlight.
Rewired that to work with the switch that was already inside the tac sit.
i am working on a rayvon to match the blue and white.
Posted 26 April 2016 - 11:03 AM
Edited by Pointman9, 26 April 2016 - 11:14 AM.
Posted 26 April 2016 - 09:04 PM
Blasty McBlaster
An Elite Alpha Trooper with the front lower pump slide of a Raider, a Triad as the pump handle, and a Longshot front end and carry handle.
Stick magazines are unaffected by the Triad pump handle. I can no longer comfortably use drum mags with it, but that doesn't really bother me.
The triad is stock. The Elite Alpha Trooper has a lock removed, but is otherwise stock also.
Posted 28 April 2016 - 09:58 PM
Nations Vs Zombies primary is complete
Killing Floor commando icon on the stock because yuh
Posted 02 May 2016 - 12:35 AM
4JAX Sceptor, a.k.a. the 4SJAX, the newest in a long line of me putting standing bike pumps in order to almost reach the sustained fire rate of a pump-action springer. Fifteen pumps to full, and completely convertible back to the original pump. All I did was pressure-fit a piece of 1/2" PVC wrapped in tape into the front of the pump tube.
Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)
But Zeke guns tend to be like proofs by contradiction
Theoretically solid but actually non-constructive
Rnbw Cln
Posted 20 May 2016 - 10:04 AM
POPULAR
As always, apologies for the terrible nighttime cellphone shots:
My finshed Sceptor, 4JAX-style. A 4SJAX:
And a quick project I threw together for a war this weekend. A Supermaxx 5000 (SM5K) with a BRISC.
Edited by Gears, 20 May 2016 - 04:05 PM.
Posted 21 May 2016 - 07:23 AM
Posted 29 May 2016 - 12:16 PM
Posted 31 May 2016 - 03:18 AM
Finally started in on my massive pile of "modified-unpainted" gear.
First up is a BoomCo FlipBow sporting a Red/Blue fade and Dripping Skulls dip.
Then we have this PoS Recon with OMW metal internals. One shell half is the Clear series, and the other has been Oil Slick dipped. The inside of the OIl Slick half has been thoroughly Vinyl Dyed, and I rather like the way the internals are shown through the clear on a black backdrop; some minor internal pieces have been chromed to help accent the casted metal.
Posted 03 June 2016 - 04:22 AM
so a long time ago in a big lots down the road I got a diamondestia and hid it in a corner
found it a few days ago and I had one of the pull back and release cross bows (the 15 dollar gun from Walmart that is always falling of the shelves) and cramed it (along side a sling fire stock from the specter that I probably put here)
might need to edit the trigger or extend or change the string
If I Can Mod a Nerf Gun
Anyone Can Mod a Nerf Gun.
Posted 03 June 2016 - 03:37 PM
It was the last day at NYCC 2015
I had just packed everything away, cosplay props, etc.
Then this hot girl comes up to me and asks for a few pics with me... so like any guy would, I drop everything, put on all the cosplay armor, pull out the Nerf Rayven (that's modded to look like a HALO Assault Rifle) and get ready for some pictures. I thought the guy was her boyfriend or somebody, but nope, he was her professional photographer...
I found that part out when I asked for her facebook page to tag her pics, and it turns out she's a professional BIKINI model... enjoying NY Comic-Con
Posted 03 June 2016 - 08:09 PM
Posted 09 June 2016 - 05:15 PM
POPULAR
Sorry in advance for shitty phone camera quality, grainy AF.
I present an unnamed firefly mod + paintjob:
EDIT: Second Paintjob ever, used Duplicolor vinyl grey and some older acrylic craft paints, finished with rustoleum matte clear coat.
Mods Include:
-Capacitor removal
-Dart holder spacer/padding (modified to fit elite darts, used to only hold old-style suction darts
-Spring upgrade
-O- Ring seal improval
-Barrel/Turret alignment (mine was mostly fine, I was one of the lucky firefly users who did not experience this to a larger degree)
-Relubrication of rotation mech, trigger, plunger, spring-loaded plunger cap (firefly users will know), and plunger tube
-AR removal
-Paintjob (left orange priming slider, trigger, tip, and switch for legal reasons and for use in HvZ)
-Turret screw replacement(for stronger and longer-lasting turret rotation mech, can take more stress now)
It gets superstock elite ranges, which I am insanely proud of for this ancient thing. The firefly is a really good platform to work with, and is really reliable as the firing/rotation mech is amazing. Never jammed. Ever.
Edited by ReThink, 09 June 2016 - 05:16 PM.
Posted 13 June 2016 - 11:42 AM
Here is my set of hammershots. They're all lightly modded, and i'm really happy with them. (AR removal and spring upgrade)
Edited by SWNerf, 13 June 2016 - 11:45 AM.
Posted 18 June 2016 - 12:54 AM
Not quite finished yet, still some detailing and attachments to add on, but it's getting there
I'm still deciding on whether or not to add some kind of damage details/marks on it.....
Posted 19 June 2016 - 06:25 PM
POPULAR
I figured I should post some of the stuff I've made recently
Zerker with integrated Air Max 6 tank and pump. This is one of my favorites, and I used it recently at a war and it worked really well, even got a couple tags with the AM6. The blast button for the secondary shot is right where you would have your hand if you were naturally holding it.
I'm REALLY happy with how this one turned out. It's a pump replaced XBZ in a raider shell using the stock overpressure valve. Uses a brit hopper because a standard one was kind of inconsistent. Shoots just a little softer than the Zerker (small tank 4B). Super clean, hardly had to do any cutting at all.
Just look at that sexy hole
Painted NF with the standard mods, plus replaced plunger tube with a clear one and added a green LED in place of the stock one.
Picture of the light. Not super bright, but eh.
Posted 20 June 2016 - 11:41 AM
POPULAR
Props to NOM for crafting us these amazing primaries. They're gorgeous.
"Too close for missiles, I'm switchin' to guns"
Posted 26 June 2016 - 02:07 AM
This is the Nerf Novablast
Internal Mods:
-I tried to improve the spring, but it became too much for the blaster and since I didn't have the means to fix it I was told to scrap that part of the mod
-Improved the seal with Teflon Tape
Paints:
-Rust-Oleum High Heat base, until I ran out then I had to swap to an unknown brand of Spray Enamel
-Testors Stop Light Red
-Silver Paint Pen
Posted 27 June 2016 - 11:45 PM
Overview and firing: https://www.youtube....h?v=zJN2o4IME98
Full imgur album: http://imgur.com/a/OV0yp
X2 Hopper HPA blaster. Super soaker Shot Blast shell. I cut open the water reservoir and made screw ports. The inside is a 1st gen big blast with my X2 hopper system. The blaster is single fire and you switch between barrels with the polycab slide. This allows you to still be able to fire while reloading one hopper.
The dart doors are magnetized.
Edited by Green Wing, 27 June 2016 - 11:48 PM.
Posted 29 June 2016 - 09:34 PM
Posted 30 June 2016 - 07:03 PM
Edited by The Manta, 04 July 2016 - 01:29 PM.
Posted 08 July 2016 - 12:19 AM
I present BOB II; a stock bolted longshot that shoots around 135 feet per second. This thing shoots Koosh darts hard and it's what I'll be using for top tier American superstock games since the flywheel glass ceiling is around 130 fps. I have another sleeper breeched longshot in the works for Australian style.
Here's the "Peri" longshot; another superstock model that I've been working on. Only shoots about 90 feet per second, but that's okay because I modded it to be as versatile as possible. It can shoot koosh and elite darts without making them fishtail and the lower fps rating allows it to be used at more wars and HvZ. A big shoutout to my brother Klaiviel for making it possible to own such a beauty.
Edited by Mehku, 09 July 2016 - 01:15 AM.
Posted 10 July 2016 - 05:19 PM
Overhauled a Buzz Bee Sentinel. Spring additions, reinforcements, brass breech, new magazine release, the works. Easiest stefan-shooting, sealed breech modification ever. Shoots far.
Doing a second one (with documentation) soon.
0 members, 1 guests, 0 anonymous users