Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#4926 Sloggy

Sloggy

    Member

  • Members
  • 2 posts
  • Location:Normandy
  • Country:France

Posted 16 December 2015 - 06:31 AM

Hi everybody,

 

This is my first modification:

200.JPG

 

I painted it in black and added a laser above the barrel

203.JPG

 

there is a button on the side to turn on the laser:

 

202.JPG

 

The batteries are in the handle:

204.JPG

 

 

 

 


  • 0

#4927 Sloggy

Sloggy

    Member

  • Members
  • 2 posts
  • Location:Normandy
  • Country:France

Posted 16 December 2015 - 06:47 AM

My second modification, the barrel of my RECON CS-6:

020.JPG

 

021.JPG

 

the cross is being modified

 

next step, the RECON...


  • 0

#4928 Brimstone Omega

Brimstone Omega

    Member

  • Members
  • 28 posts
  • Location:Onalaska, WI
  • State:Wisconsin
  • Country:United States

Posted 20 December 2015 - 05:27 PM

Here's my Modulus with integrated Deploy stock, Retaliator barrel with integrated LSFG sight and barrel, because it gives L33T ranged and uber accuracy, plus the 3s Lipo,  18AWG silicone wiring, high current Microswitch and Xt60 connector helps a touch with that. 

Super happy with how this turned out and glad to finally have had a use for that waist of space Deploy. 

I also relocated the sight rail back a fee inches so it can be used more ergonomically when shouldered with the longer stock. Doing this also opened up the jam door for easier access. 

Attached Thumbnails

  • IMAG0230.jpg
  • IMAG0232.jpg
  • IMAG0233.jpg
  • IMAG0242.jpg
  • IMAG0243.jpg
  • IMAG0241.jpg

Edited by Brimstone Omega, 20 December 2015 - 05:30 PM.

  • 0

#4929 Dart Cracks

Dart Cracks

    Member

  • FNG1 
  • 1 posts

Posted 22 December 2015 - 09:49 PM

Hey Guys, check out this new Nerf Reflex Mod I finished. For a time-laps of it's construction and more info on it's internals check out my channel.

Attached Thumbnails

  • IMG_0074.JPG
  • IMG_0075.JPG

  • 0

#4930 Queen of Trash

Queen of Trash

    Member

  • Members
  • 4 posts
  • Location:Bloomington
  • State:Indiana
  • Country:United States

Posted 28 December 2015 - 05:19 PM

This is my trash cannon. An ERTL PAS with an underslung RSCB. Basic internal mods, reinforced trigger and plunger rod with a [k25] inside. I find the [k25] to be a bit smoother in this than the [k26]. The RSCB has a sneaky little revolving door to load in darts.
IMAG0114_zps9qmzo06t.jpg

Edited by Queen of Trash, 28 December 2015 - 06:22 PM.

  • 0

#4931 Gears

Gears

    The boy who lived

  • Members
  • 848 posts
  • Location:Chicago
  • State:Illinois
  • Country:United States
  • u/GearsLGLF on Reddit

Posted 30 December 2015 - 12:19 PM

Koree came over while I was home for Christmas and I wanted to make a supergun without putting in any effort. Below it is a Panther JLego made me for my bday a couple years ago.

x71OwIu.jpg


Edited by Gears, 30 December 2015 - 12:19 PM.

  • 0


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#4932 Majestic

Majestic

    Member

  • Members
  • 57 posts

Posted 31 December 2015 - 05:55 AM

December was a busy month for modding. Here are a pair of flywheel blasters.

 

Rapid Red with integrated stock from a Rapid Glow. I performed a lock removal, 18AWG rewire, and a 20A micro switch for the rev trigger. It runs on 3 trustfires. I didn't do much to it internally as this was a commission mostly for the paint job. The paint is a Duplicolor black vinyl dye primer coat, Rustoleum mirror base coat. and teal Krylon Plastics top coat. I got the design by placing the blaster in an patterned fishnet stocking and spraying the teal on to the mirror finish. The white accents are Citadels brush paint. There is a Duplicolor gloss clear coat on top. The commissioner likes the look of gloss clear in person but my camera does not capture the details very well.

 

20151203_154621_zpssyyzevbf.jpg

 

20151203_154657_zpswin8bdcb.jpg

 

 

Strayven, 3S LiPo, Rhino 130's, 18AWG re-wire, volt meter wired to a 4PST switch. Average velocity

115fps. Paint is Duplicolor Desert vinyl dye, and Citadels brush paints.  Duplicolor gloss clear coat, with a Rusoleum matte finish on top.

 

20151204_014629_zpsqgupal5v.jpg

20151204_014709_zpsibnotvkf.jpg

 

20151204_014745_zpss3307ok9.jpg


Edited by Majistic, 31 December 2015 - 06:02 AM.

  • 0

#4933 Majestic

Majestic

    Member

  • Members
  • 57 posts

Posted 14 January 2016 - 04:14 PM

Introducing the Mecha-Godzilla, a Zombie Strike Longshot with an integrated Recon as the pump grip. On the inside, the Recon pump grip links to a pair of polycarb brackets that connect to a pair of carbon fiber rods that connect to the bolt sled. There is zero flex in the rods and it makes no contact with the sides of the shell so the prime is super smooth and has a very direct feel. The Recon also houses a flashlight powered by a single Trustfire accessible through the Recon's jam door. The flashlight's clicky is mounted in the little nub behind the mag well on the LS. I installed Zaruko's plunger supports fore and aft, I'm skeptical of their effect on blaster performance but the commissioner wanted them in there. The pistol grip has been fortified with 65d in all of the areas that don't contact moving parts, and is quite stiff. I installed OMW stages 1 and 2. The AR has been removed and the dead space filled with 19/32's brass and 65d with an 1/8in. rubber gasket padding the area where the plunger makes contact. The breech is now sheathed in brass and seats into a brass barrel that will accept full length as well as half length darts. Other mods include three yellow LED's wired in parallel with the flashlight and a stock block done with 1/2in PVC. I didn't want to go crazy with the spring load on this one so it is using the OMW "8+kg" one that came with the S1 kit. The paint is Dupli-color vinyl dye in two tone grey with chrome Citadels accents that have been inked, and a bit of red on the stock. This is very nearly the best Longshot I know how to build and I am quite proud of it. the darts used in the speed tests were unmodified elites.   

 

20151221_011717_zpsk0w3mioo.jpg

 

20151221_011740_zpsp2ezt9uq.jpg

 

20151221_011840_zps75szyeza.jpg

 

20151221_011914_zpsn5xtdecr.jpg

 

20151221_012152_zpskstcqucr.jpg

 

MechaGzilla_zps3pv6gbkn.png


  • 0

#4934 Agles

Agles

    Member

  • Members
  • 48 posts
  • State:Ohio
  • Country:United States

Posted 20 January 2016 - 09:14 PM

my 1st mod. 

removed all the safeties except for the main safety. 

changed it over to a 2200mah 3s lipo.

removed AR and double sealed the piston.

added a black paint job.

 

 

Attached Thumbnails

  • IMG_0399.JPG

  • 0

#4935 Mehku

Mehku

    Member

  • Members
  • 383 posts
  • Location:Milwaukee
  • State:Wisconsin
  • Country:United States

Posted 23 January 2016 - 10:23 PM

IMG_4647_zpsbooqthvi.jpg

 

I present the longshot affectionately known as "Webster." That was the name written on its stock when my friend found it at goodwill. He then traded it to me and we both decided to keep the sharpie'd name on it.

 

I still have a lot of shell work to do, but it's definitely 100% functional. 

 


  • 0

#4936 HatBlasterandKazoo

HatBlasterandKazoo

    Member

  • Members
  • 12 posts
  • State:New York

Posted 23 January 2016 - 10:42 PM

I tried posting this once, and it didn't seem to work. Here are my two paint jobs, the Retaliator was a rushed project, I'm only disappointed in my own negligence, I didn't sand the blaster at all for some reason.cAhugFr.jpg

3EwBpB9.jpg


  • 0

#4937 Turdlez

Turdlez

    Member

  • FNG1 
  • 1 posts
  • Country:New Zealand

Posted 24 January 2016 - 12:27 AM

Here's my "Galaxy Stryfe". Stryfe with a Slingfire stock, purple swirl paint job with green accents, a few gaps covered with epoxy putty. still runs with standard AA batteries I am waiting for a lipo to arrive soon. 

 

Attached Thumbnails

  • GS.jpg

Edited by Turdlez, 24 January 2016 - 12:28 AM.

  • 0

#4938 yokoschoko

yokoschoko

    Member

  • Members
  • 4 posts
  • Country:Germany

Posted 24 January 2016 - 02:09 PM

My collection:

Attached Thumbnails

  • 1.jpg
  • 2.jpg
  • 4.jpg
  • a.jpg
  • IMG_7801.JPG
  • IMG_7879.JPG
  • IMG_7922.JPG
  • IMG_7926.JPG
  • IMG_7906.JPG
  • FullSizeRender.jpg

  • 0

#4939 CCBall

CCBall

    Member

  • Members
  • 82 posts
  • Location:Become an off-screen friend and find out.
  • State:Alabama
  • Country:United States
  • u/DerpFails on Reddit
  • DerpFails on Youtube

Posted 24 January 2016 - 04:28 PM

My "modded" firestrike. I hope you accept videos, too:

Edit: Sorry about the bad recording. My friend was recording, and if you saw that dart fly, you would understand why I think it's cool.

Edited by CCBall, 24 January 2016 - 05:03 PM.

  • 0
I'm just a nerd with Asperger's Syndrome and a few electronics.

#4940 paigerow

paigerow

    Member

  • Members
  • 6 posts
  • State:New Hampshire
  • Country:United States

Posted 26 January 2016 - 01:40 PM

20160126_130311.jpg
So I got out a few from my massive cache. I picked up the recon mk2 and the stealth ops kit yesterday. Don't worry I modded the recon. O-ring teftaped and trigger guard trimmed to accept all magazines.

So left to right'

Demolisher with integrated Titan tank and at3k pump in the handle. The internals are all low friction super fast!

Stryfe
All locks and switches removed, why bother doing anything else, jk lipos soon.

Wooo longshot! Oh yeah I have the omw metal trigger on that, pretty sure we all know the rest. Still needs a real sleeper breach but the many kg spring is fanfreakntasitic!

Omw 5kg recon sans a/r and improved oring seal.

Similar spec retaliator, got it as just the core so assortment of attachments.

Cross bolt, no locks and, and! Omw upgraded catch spring for the magazine release! No more dropped clips!

7kg-d rough cut, haters gunna hate!

No a/r and oring sealed Magnus.

Frankenfinder, bringer of DOOM. Loads and loads of fps! Such seal, much wow!

Party like its 2003! Oh it's pumped up!

Rapid red, same as stryfe, I promise.

Which brings us to... My big ass night finder... Oh wait, bbb, yeah it hurts. Haven't ranged it yet but should get 120ft with streamline/elites, forget homemades, I won't find them again.

So I have 100 more modded up blasters from every chapter of nerf history and that was the last 3 months.
  • 0
we would all cheat with bob o'bob don't lie
_Kensie
Wives have knives

seems legit


#4941 Mehku

Mehku

    Member

  • Members
  • 383 posts
  • Location:Milwaukee
  • State:Wisconsin
  • Country:United States

Posted 28 January 2016 - 02:06 AM

IMG_4664_zpsktklnpun.jpg

 

I don't know why, but I'm really proud of this build. Others have made longshots that are far crazier than this one, but I just am. It's about 80% complete and it's the heaviest damn longshot I've ever held with all the shell reinforcements that I've done. It really feels good in hand. I just need to drop an OMW boltsled, plunger, and metal trigger in there. I also need to find a way to cover up / make the epoxy putty look pretty, but that's not as important. 


  • 0

#4942 Rommel McDonald

Rommel McDonald

    Member

  • Members
  • 20 posts
  • Location:Inverness, Ca., 94937
  • State:California
  • Country:United States

Posted 28 January 2016 - 10:46 PM

Rapidstrike: Basically a Rapidstrike Uzi with Airsoft barrel shroud and Worker stock. Modified full size grip using Pyragon grip for integration. Integrated sling mount (black D-ring near stock in upper shot) Battery pack on the side, can switch between 7.4 and 11.1v, using Efest IMRs. No motor upgrades, just removed locks, resistors/limitors and rewired main sections. (this is used primarily for HvZ, and I don't want it too powerful for players charging at me with no face protection)

 

Hammershot: Shaved grip, 7 shot cylinder from China (Ebay) and Full Metal Hammershot kit from Blasterparts.

 

custom_nerf_rapidstrike_and_7_shot_hamme

 

And here's my Roughcut Tactical Shotgun:

RoughCut_Final_Comp.jpg


Edited by Rommel McDonald, 29 January 2016 - 01:10 AM.

  • 0

#4943 Nerfguy2002

Nerfguy2002

    Member

  • Members
  • 89 posts
  • Location:Some where over the rainbow
  • State:Wisconsin
  • Country:United States

Posted 01 February 2016 - 02:22 PM

This my retaliator, modded by OMW, side tac rails, and a charging handle.

Sorry about the quality.

P1030255.JPG  

P1030254.JPG


Edited by Nerfguy2002, 03 February 2016 - 06:37 PM.

  • 0

#4944 Vim Fuego

Vim Fuego

    Member

  • Members
  • 64 posts

Posted 01 February 2016 - 10:37 PM

My latest creation - the lightened Flipfury.

It features a shaved and filled grip for a less feral feel, and substantially less bodywork under the drums. I say 'lightened' but it's still a fairly hefty piece of hardware, but it is easier to fit into a holster now...

vDijy9j.jpg

and here's a few shots detailing the grip, bodywork, drums and muzzle.

3IavTr3.jpg
  • 0

#4945 Felix the cat

Felix the cat

    Member

  • Members
  • 43 posts
  • Location:Colorado Springs
  • State:Colorado
  • Country:United States

Posted 02 February 2016 - 08:14 PM

My take on flyingchickens 6B:

Attached Thumbnails

  • image.jpeg
  • image.jpeg
  • image.jpeg
  • image.jpeg
  • image.jpeg

  • 0

#4946 Mehku

Mehku

    Member

  • Members
  • 383 posts
  • Location:Milwaukee
  • State:Wisconsin
  • Country:United States

Posted 03 February 2016 - 01:26 AM

IMG_4671_zpspqpklfh1.jpgIMG_4666_zpshoy77ptd.jpg

 

Finally finished this thing. It's sporting a metal trigger and a polycarbonate boltsled, and a slew of other mods that I'm too lazy to type out. Literally the only thing that I didn't do to this thing was give it a brass breech.


  • 0

#4947 yokoschoko

yokoschoko

    Member

  • Members
  • 4 posts
  • Country:Germany

Posted 06 February 2016 - 05:13 AM

also for selling :)

etsy -> NerfCustomWorks

Attached Thumbnails

  • FullSizeRender.jpg
  • IMG_8089.JPG
  • IMG_8094.JPG

  • 0

#4948 Tigroid

Tigroid

    Member

  • FNG1 
  • 1 posts

Posted 08 February 2016 - 09:02 AM

Whoot first post here!

*Ahem* Pics:

WIP Rapidstrike

zy3AWAc.jpg?1

WIP Matching Stryfe

7KzDZw5.jpg?1

And my tactical roughcut:

2ddQ9pB.jpg All of these are still being worked on, and I'll get more pictures up as I finish them.


  • 0

#4949 MACHOMITCH144

MACHOMITCH144

    Member

  • Members
  • 3 posts
  • State:Michigan
  • Country:United States

Posted 08 February 2016 - 10:16 PM

image_zpsqpo1qei7.jpg

Modded buzz bee brute
7.2 volt airsoft battery
Recon stock/battery holder
Rough cut foregrip
Predator scope Homeade barrel
Coated flywheels

Edited by MACHOMITCH144, 09 February 2016 - 06:02 AM.

  • 0

#4950 TOTtomdora

TOTtomdora

    Member

  • Members
  • 35 posts
  • State:New Jersey
  • Country:United States

Posted 11 February 2016 - 05:13 PM

Was on my way to Home Depot to get parts to make an AABow when I came across an old Bow 'n Arrow (along with a broken RF20; that'll probably be a slow project) at the thrift store. Needless to say, I didn't need to go to the Home Depot after that :P

 

IMG_20160211_164947.jpg

 

Took me about five minutes to get the RSCB onto the BNA, and then spent another hour making it fit in the "sight" (lots of trial and error with a dremel sanding drum). I'll paint it eventually, I just don't know what color or theme to use. Any ideas out there?

 
IMG_20160211_165059.jpg
IMG_20160211_165106.jpg

  • 0


1 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


    Bing (1)