Modification and Paintjob Pictures
#4951
Posted 13 February 2016 - 03:53 AM
#4952
Posted 14 February 2016 - 01:51 AM
I'm resurrecting an old war beast that LouieC3 made back in the day. It really needed to be reborn in a modern setup. It's currently packing a cut down [k26] under the hood and it's completely bonkers even with the stock breech during tests.
Pump grip and hybrid cpvc and brass breech is still in the works.
#4953
Posted 19 February 2016 - 02:38 PM
my favorite paint job (also my current primary)
updated:i added my signature (currently the zombie arm decal from one of the zombie strike packs and the flames)
and my rayven with a raider front grip and a some what good paint job (first attempt at dry brushing and I decided to start stabing it)
Edited by Raiderous, 20 February 2016 - 01:43 AM.
If I Can Mod a Nerf Gun
Anyone Can Mod a Nerf Gun.
#4954
Posted 24 February 2016 - 08:54 PM
POPULAR
What's on workbench at the moment:
"RaptorStrike" (Work In Progress). Ultraminimised Rapidstrike re-shelled in a Tornado Strike body, with integrated Demolisher launcher. Currently running 180's and teeny-tiny 2S lipo in a power-stock until I fit the triggers and sort the wiring properly. Just sorted rev and pusher-motor triggers and switches. Because I inadvertently cut off the supports for the pusher-motor control switch when minimising, I've decided to go with MTB's Rapidstrike wiring-loom. Some shots of the basic internals here.
And some older stuff:
The "Postman". 'Cause he always rings twice. Hammershot/Messenger masterkey integration. Hammershot trigger sorted to first fire Hammershot (on a hair-trigger), then the Messenger (with a longer pull). Have run Messenger before as a shotgun, but prefering it now in it's usual 1-2-3 firing sequence.
Edit: Firing video here.
"Nerkita" Rayven. Hypercats Dewalt coil-nailgun "homage". Makita 9.6v NiCd battery fully integrated to run the Rayven. This one currently running stock motors on improved wiring and switchgear; Mark 2 has 180's, INR-18650's (and an infinitely better paint-job ...eventually).
The "MessStrike". Messenger/Firestrike integration. My take on SBNC Rob's Retaliator-gripped Messenger. Brassed, air-flow tuned and running the legendary Champion BS0939 (3-3/4" x 5/8" x 16G) AU$2.00 spring addition. No chrono so will make no wild claims ... you'll just have to trust that it's pretty decent. Some comparative spring data here though.
Edited by UnscrupulousModefiler, 21 April 2016 - 05:47 AM.
"Greetings Nerflings, we come in peace. Shoot to Thrill!
#4956
Posted 04 March 2016 - 04:59 PM
I have never tried making something like this so a lot of it was by trial and error. The main tools used were a box cutter knife, sand paper and glue. I hand carved the stock, handguard and the rear sight from wood.I also filed down the trigger, rails, digital designs for a realistic look and added a faux bolt assembly that has a spring inside and the bolt can lock back and spring forward just like on a real hk gun. The iron sights also are functional and resemble hk sights.
I think it turned out very well, let me know what you guys think
#4959
Posted 11 March 2016 - 05:18 PM
Here's my Modulus with integrated Deploy stock, Retaliator barrel with integrated LSFG sight and barrel, because it gives L33T ranged and uber accuracy, plus the 3s Lipo, 18AWG silicone wiring, high current Microswitch and Xt60 connector helps a touch with that.
Super happy with how this turned out and glad to finally have had a use for that waist of space Deploy.
I also relocated the sight rail back a fee inches so it can be used more ergonomically when shouldered with the longer stock. Doing this also opened up the jam door for easier access.
Oh my goodness! I Don't believe I've ever seen a nicer looking blaster on the haven! I'm wasting one of my posts today just to say how incredible this is! Amazing work!
Done and Done! Sorry bout that! need to post pics of these on here anyways.
(Above) My unnamed Crayola barrel sidestrike with an *ehhh* paint job.
(Above) The Demolabolololisher, my premium Zambie slayin' machine. If you cant tell, this is a Demolisher with the rocket launcher part cut off and and integrated Abolisher hamp roughcut.
NO PICTURE, NO POST.
Edited by Sketch Art Online, 12 March 2016 - 08:09 PM.
Do not aim at eyes or face
#4961
Posted 13 March 2016 - 08:10 AM
Pump action retaliator
Edited by Aldegar, 13 March 2016 - 08:12 AM.
www.tacticoolfoam.com
Custom nerf guns and nerf modification kits
#4962
Posted 13 March 2016 - 08:15 AM
AK74su stryfe running on 3 imrs
Stryfe vector, m4 stock, 3s, falcons
Edited by Aldegar, 13 March 2016 - 08:14 AM.
www.tacticoolfoam.com
Custom nerf guns and nerf modification kits
#4963
Posted 18 March 2016 - 05:28 PM
Fresh off the workbench. Her name's Kaasi.
Some may argue that it's a waste if you don't replace the plunger tube, but I disagree. I think it takes away from the character of the blaster, and I already have a plusbow. This punches 125 fps with stefans, so I'm happy. I just have a few more minor reinforcements to make and it's done.
Edited by Mehku, 18 March 2016 - 05:40 PM.
#4965
Posted 21 March 2016 - 09:30 PM
I've seen a lot of pristine versions of this rifle out there, so I planned from the get-go to make this baster look very used. I laid down a flat aluminium base under the black areas and, once again, used a rocksalt mask to get some chips around the edges. As an added bonus, if I accidentally rub the black away there's a layer of metallic aluminium under there!
I went a bit overboard with the rocksalt on the first coat and so went back over it with less salt and more black. This gave the black a mottled, fatigued look to it which came up great in the weathering stage.
#4966
Posted 22 March 2016 - 12:56 AM
I don't know why I didn't try this before. Feels great.
#4968
Posted 03 April 2016 - 01:51 AM
POPULAR
Rough af Burst Wave modification. Write Up coming soon.
#4969
Posted 06 April 2016 - 04:17 PM
Rough af Burst Wave modification. Write Up coming soon.
I would love to see that write up. the burst wave is my favorite stock and modified blaster. i love the stock concept, the mod potential and the ergonomics. although i don't own one, i plan to get one and i feel like almost no one has done anything with them. its nice to see someone has. great work.
you want a pic? heres a pic. this was my idea for a pump action tek six. needless to say, it didnt work. so i kept the maverick slide as just a fore grip. the mav handle is very comfortable and i like the tek six's stock performance. the only internal mods have been seal improvement and barrel post removal. and im never yosuing my webcam as a camera again
Edited by Sketch Art Online, 06 April 2016 - 04:18 PM.
Do not aim at eyes or face
#4971
Posted 14 April 2016 - 11:06 AM
Greetings, thought I'd sign up and share my work:
Demolisher 'Bolt Gun'
I removed most of the locks, replaced the wiring with 18g silicon, deleted the missile launcher and used the pump grip to make a new fore-end. I run a 3s LIFepo4 battery which sits in the fore-end ( one side can be unscrewed to access the battery ). Shoots hard and is very loud- I like it a lot...
Longshot
I went to town on this blaster:
10KG SPRING
ALUMINIUM BOLT SLED
AIR RESTRICTOR REMOVED
PRESSURE-RELIEF HOLE FILLED
MECHANICAL LOCKS REMOVED
NEW O-RING SEAL ON PLUNGER
REGREASED CONTACT SURFACES ON MOVING PARTS
PADDING ON PLUNGER HEAD
CUSTOM PRIMING BOLT
CUSTOM PAINT-JOB
FRONT-GUN SHELL INTEGRATION
OPEN SIGHTS & PICITINNY RAIL ADDED
JAM DOOR MODIFIED TO OPEN AT ANY TIME
Paint-job is loosely inspired by District 9 'Prawn' weapons.
AlphaTrooper
Fewer mods made to this blaster, only external change is the not-very-subtle angled fore-grip:
OZNERFNERD UPGRADED 5KG SPRING
OZNERFNERD UPGRADED TRIGGER CATCH & SPRING GUIDE
REMOVED MECHANICAL LOCKS
RE-GREASED SEALS AND CONTACT SURFACES ON MOVING PARTS
ANGLED FORE-GRIP INTEGRATED INTO PUMP PRIMING HANDLE
JAM DOOR MODIFIED TO OPEN AT ANY TIME
RAIDER SHOULDER STOCK
Hammershot
Main mod here is the 7 shot 3D printed chamber/turret- it fits perfectly with very little work, and rotates just fine like the original. Didn't bother fitting a new spring as it's plenty powerful enough in stock form for my needs.
Thanks for reading
#4973
Posted 17 April 2016 - 01:29 AM
My Fixed And Painted Raider Pistol (it looked super makeshift before)
My Firestrike Cannon (probably not even that high of a fps as I don't have a choronograph)
so last game I went to (octoberish)
I let my sister use my raider and she isn't very strong and put it down
either she or some other "demon spawn" got a vinyl tiped dart inside the front grip (infront of the trigger guard)
I'm still in shock on how that was managed
no kid ive met is able to get a nerf gun jammed like that
Edited by Raiderous, 17 April 2016 - 01:30 AM.
If I Can Mod a Nerf Gun
Anyone Can Mod a Nerf Gun.
#4974
Posted 17 April 2016 - 05:56 PM
#4975
Posted 18 April 2016 - 03:24 PM
My search bar function is on the fritz, so here's hoping I havent posted these here yet.
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users