Modification and Paintjob Pictures
Posted 06 March 2013 - 05:59 AM
AR-removed, conduit barreled and dead-space removed, plus I glued the rotation mechanism so it turns with each shot rather than one in every two shots. I'm just waiting on a better spring.
My ongoing magstrike project. It does work, I'm just working on a more structurally stable hopper that can take clips.
Probably my favourite elite blaster so far. With these motors and all the useless electronics removed it's awesome.
This is the blaster that made me loath stampedes. Essentially everything that could go wrong did go wrong.
Posted 06 March 2013 - 10:53 PM
-Two Panther Tanks connected to one blast button
-5 1/2 in. PETG Barrels
-Homemade Barrel Spacer
-Extended Pump Draw
Posted 07 March 2013 - 03:08 AM
And this Nerf super soaker (forgot what the name was):
Posted 08 March 2013 - 03:09 PM
The front unit is still detachable
Matching mask just for the LOLs
On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.
Posted 08 March 2013 - 10:09 PM
Basic minimized NF. I wanted a smaller side arm.
Posted 10 March 2013 - 03:42 PM
check out clean the logo is, and how metallic the paint is!
Youtube video to come soon, so stay tuned!
Posted 10 March 2013 - 06:40 PM
-the full gun
-the rayven stock
-the trigger/handle area
Posted 15 March 2013 - 12:25 AM
Posted 24 March 2013 - 08:58 PM
Posted 26 March 2013 - 09:07 AM
Rear loads through these slots.
Everyone hates engineers because they listen to what you say and then think about it.
Check out my YouTube!
Posted 27 March 2013 - 01:54 PM
...you get stuck inside....so this.......
Posted 28 March 2013 - 10:33 PM
Heres a couple Mavericks I just finished, a Pepperbox & my Micro-Mav. Both guns work as they should & fire micro darts quite well.
Posted 29 March 2013 - 04:06 PM
The Disk Shot Remote is probably the most interesting thing. I crammed a keychain videocamera inside.
Haven't tested it in a war yet, so I'm not sure how good the battery life is, but it accepts MicroSD cards and connects to my computer via USB.
EDIT: Forgot about this. MavTitan on a Recon barrel, for a tacticool masterkey - with some powah.
Edited by Eik, 29 March 2013 - 06:27 PM.
Posted 30 March 2013 - 12:07 AM
The priming bar of the Jolt in its stock alignment was annoying for me, as the horizontal bars would run into my hand if I tried to fire it with a solid grip. So, I took it apart, turned the handle 90 degrees, and reassembled it. Much more comfortable to hold, prime, and fire now.
Posted 30 March 2013 - 01:50 PM
roughcut rebarreled write up coming...
Posted 31 March 2013 - 09:40 PM
This is a CPVC/PVC coupler with a dart stop in the back
This is a modified metal fender washer glued to the spring retention plate
Homemade polycarbonate catch to hold the [k26]
The plunger rod was reinforced with a hanger
Pittsburgh General Rules of Engagement:
1.) Fuck Running
Posted 01 April 2013 - 06:29 PM
This thing sports a 1/2" CPVC coupler inside of a 1/2" PVC coupler, inside a piece of 1.5" PVC. This allows for any type of barrel set up, and also supports 7 shot absolvers, BBB missiles, and the original Mega Missiles.
Here are the internals:
It takes ten pumps to get to the ideal pressure and is built like a tank (pun intended). I don't see it breaking any time in the near future. I've now got a Titan that is pistol sized, shoots any type of dart out of any type of barrel, has a concealed pump, and is stock compatible. This is my favorite blaster that I have created and will be my secondary for Summer wars.
Purple paint job and writeup incoming.
Edited by ShaNayNay, 01 April 2013 - 06:36 PM.
New Jersey is fuckin weird
Posted 02 April 2013 - 03:09 PM
Here's my paint job I recently finished over spring break. The silver stuff was all done by hand, however my handwriting is pretty terrible so some of the detailing came out wonky.
OMW Immortal kit w/ 8 KG spring
6 KG OMW spring in the maverick
And yes, those are cats in pajamas. Why? Because why not?
Posted 04 April 2013 - 10:39 AM
New loaner, finally finished my SM3K. Brass OPRVed, dual action pump, PETG, other general overhaul mods.
Blue camping foam spacer because it works and I can.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users