Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5160 replies to this topic

#4351 hydro cannon kid

hydro cannon kid

    Member

  • Members
  • 35 posts

Posted 20 February 2013 - 08:21 PM

I recently received a Goodwill 2k with a pump that had a broken check valve. After much deliberation weather to throw the pump away or to just use a Mcmaster check valve as a replacement, I found that you can just cut down your 2k pump and hammer it into your panther pump with no adhesive. As well as puting your panther internals back in your shell with minimal shell work this can also be done with a sm1500 if you don't have a at2k at your disposal.

  • 0

#4352 481IceDragon

481IceDragon

    Member

  • Members
  • 245 posts
  • Country:United States

Posted 20 February 2013 - 08:35 PM

Posted Image

Posted Image

Posted Image

Edited by 481IceDragon, 22 February 2013 - 03:53 PM.

  • 0

#4353 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 559 posts
  • Location:Merseyside, UK
  • State:England
  • Country:United Kingdom

Posted 21 February 2013 - 11:20 AM

Posted Image

Winchester 1887-esque RFR

Edited by BritNerfMogul, 21 February 2013 - 12:40 PM.

  • 0

#4354 BlackBoarderV

BlackBoarderV

    Member

  • Members
  • 37 posts

Posted 23 February 2013 - 05:34 AM

Coming Along Nicely.
Posted Image
  • 0
Pink Floyd Dark Side of the Moon, Wish you were Here, Meddle.
Led Zeppelin 4, Physical Graffiti.

#4355 clownieX

clownieX

    Member

  • Members
  • 102 posts
  • Location:Harisburrg
  • State:Pennsylvania
  • Country:United States

Posted 23 February 2013 - 06:19 PM

Nerf Strongarm with Panther integration. All AR's removed, wire loop trigger added.



Posted Image
  • 0

#4356 modsfornerf

modsfornerf

    Member

  • Members
  • 85 posts
  • Location:New York 11220
  • State:New York
  • Country:United States

Posted 24 February 2013 - 05:43 PM

My overhauled airtech 3000.
Posted Image
Posted Image
Posted Image
  • 0
Check out my youtube channel My link
Also check out my blog: website

#4357 snakerbot

snakerbot

    Maker of Things

  • Members
  • 299 posts

Posted 24 February 2013 - 06:48 PM

Posted Image
  • 0

#4358 Tigadee

Tigadee

    Member

  • Members
  • 77 posts
  • Location:New Zealand

Posted 25 February 2013 - 03:12 AM

Tornado Strike in Warhammer 40K Ultramarines colors:
Posted Image
Posted Image

Rayven Ghost in the Shell Seburo-style:
Posted Image
Posted Image
  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#4359 Trevor

Trevor

    Member

  • Members
  • 98 posts
  • Location:88103
  • State:New Mexico
  • Country:United States

Posted 25 February 2013 - 02:36 PM

Custom p90ish elite rayven.
Posted Image
Posted Image

I played a bit of neotokyo (HL2 mod) which is loosely based on ghost in the shell, and that was my primary inspiration for my mod



Mods include:

Resistor removal
Complete rewire
Rayven-to-elite rayven motor swap
Trustfire Batteries
integration of airsoft p90 grip
replica eotech

Edited by Trevor, 25 February 2013 - 02:57 PM.

  • 0

#4360 BuffNerd

BuffNerd

    Member

  • Members
  • 70 posts
  • Location:Pittsburgh, Pa
  • State:Pennsylvania
  • Country:United States

Posted 25 February 2013 - 04:06 PM

LEDs in my overhauled AT3k

Posted Image
  • 0
"God dammit Jax..."-Missile Defense Apoc 2014

Pittsburgh General Rules of Engagement:
1.) Fuck Running

#4361 Lucian

Lucian

    Member

  • Members
  • 445 posts
  • Location:Mansfield, CT, 06268
  • Country:United States
  • u/lucian151 on Reddit

Posted 25 February 2013 - 05:42 PM

Posted Image
Buy it, it's rad. Or just let me shoot you with it.
  • 0

Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures. 


#4362 wifethinksimageek

wifethinksimageek

    Member

  • Members
  • 6 posts
  • State:Arizona
  • Country:United States

Posted 25 February 2013 - 05:59 PM

Here is my PVC Couplered Panther which I finally found at my local Walmart. I made a nice locking Brass Breech as well nested into some PVC. Hits about 100' or so with weighted Stefans.

Posted Image
  • 0

#4363 481IceDragon

481IceDragon

    Member

  • Members
  • 245 posts
  • Country:United States

Posted 26 February 2013 - 09:25 PM

Extended strongarm barrel drop

Posted Image

Write up Here

Edited by 481IceDragon, 26 February 2013 - 09:29 PM.

  • 0

#4364 2TAGS

2TAGS

    Member

  • Members
  • 250 posts
  • State:Indiana
  • Country:United States

Posted 27 February 2013 - 09:14 PM

Its started . Now finishing it will be the real chore

Posted Image
  • 0

#4365 ilikefish58

ilikefish58

    Member

  • Members
  • 86 posts
  • State:Texas
  • Country:United States

Posted 27 February 2013 - 11:08 PM

T3k 2.0.
Posted Image

Posted Image
  • 0

#4366 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 559 posts
  • Location:Merseyside, UK
  • State:England
  • Country:United Kingdom

Posted 28 February 2013 - 07:42 PM

Mass Effect themed stryfe I've just finished for an upcoming event:
Posted Image
Posted Image
Posted Image
  • 0

#4367 TheWiredDJ

TheWiredDJ

    Member

  • Members
  • 51 posts
  • Location:Dayton, OH
  • State:Ohio
  • Country:United States
  • u/TheWiredDJ on Reddit

Posted 01 March 2013 - 12:38 AM

Won't post my entire backlog of stuff I've made, might as well just start with this year and go forward.

Posted Image
A Stryfe/Rough Cut masterkey commission that just went out

Posted Image
My own Stryfe/Rough Cut masterkey

Posted Image
Bandit stripe style, pumpgrip LS commission I finished not long ago.

Posted Image
MLP Sparkle Twilight themed raider commission

Posted Image
Rebarreled TTE (mega dart version) w/ 1/2" PETG
  • 0

Used to commission Nerf guns I guess.

Gallery/Blog.
Facebook page.


#4368 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts
  • NerfHaven Supporter
  • Location:Long Island
  • State:New York
  • Country:United States
  • Aeromech on Youtube

Posted 01 March 2013 - 01:09 PM

I call it the Quatra-pede. Exactly what it sounds like. 4 Stampedes bolted together.


Posted Image


Posted Image


Posted Image
  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#4369 BlackBoarderV

BlackBoarderV

    Member

  • Members
  • 37 posts

Posted 02 March 2013 - 07:15 AM

Posted Image

CPVC'd My Strongarm.

Edited by BlackBoarderV, 30 March 2013 - 04:26 AM.

  • 0
Pink Floyd Dark Side of the Moon, Wish you were Here, Meddle.
Led Zeppelin 4, Physical Graffiti.

#4370 JPRoth1980

JPRoth1980

    Member

  • Members
  • 56 posts
  • Location:Houston, TX
  • State:Texas
  • Country:United States

Posted 02 March 2013 - 08:42 AM

Stipple-painted Stryfe ready for integration onto my primary HvZ blaster, once I get it painted to match.

Posted Image

Posted Image
  • 0

#4371 ShaNayNay

ShaNayNay

    Member

  • Members
  • 254 posts
  • State:Missouri
  • Country:United States

Posted 03 March 2013 - 05:52 PM

Shortie Raider
Posted Image

These Are pretty simple to make, so its not worth its own thread.
1. Unscrew and open blaster. Take out all internals
2. Cut off front of blaster and sand it down so it looks nice.
3. Epoxy a handle onto the jam door. I used 1/2" PVC, and also filled it with hot glue after the epoxy cured.
4. Cut, sand down, and lubricate this wall inside the blaster:
Posted Image
5. Cut back the shell with a dremel so the jam door and handle go farther back. Test to make sure it is far enough.
6. Reassemble the blaster, leaving out the locks (excluding the one that locks the bolt sled after priming) and old priming grip wire.
7. Hot glue the top of the bolt to the jam door.

Because it isn't traditional pump action, I can't get as fast of a rate of fire, and you can only left hand fire now. However, it's now the size of/smaller than a Recon, and looks pretty cool. It is a great fix if you are missing the priming grip on your Raider.

Edited by ShaNayNay, 03 March 2013 - 05:55 PM.

  • 0

New Jersey is fuckin weird


#4372 KeiichiRX7

KeiichiRX7

    Member

  • Members
  • 51 posts
  • Location:Corpus Christi. TX

Posted 03 March 2013 - 08:03 PM

A recon with Retaliator internals, mated with another recon and a toy gun fore end, with 4 tone safety orange camo
"Aftermath"
Posted Image
  • 0
Capt Slug thinks this thread is idiotic. Why did any of you seriously reply to this?

Why so serious?

#4373 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts
  • Location:North Brunswick
  • State:New Jersey
  • Country:United States

Posted 03 March 2013 - 08:04 PM

Posted Image
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#4374 481IceDragon

481IceDragon

    Member

  • Members
  • 245 posts
  • Country:United States

Posted 04 March 2013 - 07:02 PM

Finished my firestrike

I used teclis blue, enchanted blue, and blaze orange, ov a krylon flat black. Covered with matte rustoleum clear coat.

Posted Image

Tsk s one shows the colors a little better but it's blurry..
Posted Image

Posted Image
  • 0

#4375 DartSlinger

DartSlinger

    Member

  • Members
  • 222 posts
  • Country:United States

Posted 05 March 2013 - 10:52 PM

Posted Image

This is a modification that I did a couple of years ago. It has a piece of 1/2 CPVC pipe shoved and hot glued into the barrel and a coupler on the end. The plunger has also been padded. It shoots nearly eighty feet angled upward with whistler darts.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users