5162 replies to this topic

[melbourneSTORM4eva]

Vinnie D., on Oct 29 2009, 04:50 PM, said:

I'm calling it "Leviathan"

Integrated added RSCB, integrated NF w/speedloader, obvious shell mods, added double action mini bike pump. Swappable barrels allow it to fire a 5 dart shotgun, the titan missile, and a 3 dart shotgun concealed under the titan missile. There's also a mini flashlight in the nitefinder because I've been sticking flashlights in everything lately.

is that....a little overkill?

[Ryan201821]

Rear-loading Firefly turreted Airtech 2000. Shoots hard. Just need to make a barrel spacer.



Tribute to Spoon

Edited by Ryan201821, 29 October 2009 - 06:40 PM.

[hola]

Here are my guns that I've finished recently.

[Vinnie D]

My assassin guns. First a fairly clean pistol styled SSPB.


Then Fugly but effective double barrel.

[SonReeceSonJensen]

I just love the unnecessary size of the Titan so I had to leave it in the stock shell. I did rip out every single piece of plastic not related to the main firing mech and MAN there is a lot of crap in there.

I’m very pleased with the PJ on this on.


The whole goal was to use the sights as a stabilizer for the RSCB. For lack of a ball valve I went with this breach-loading design. Quite easy to work with.


Yes, my Titan has a massive black shaft.



Specs:
• 7-shot RSBC, completely modular design.
• Ranges are all over the map since the POS has never NOT double/triple/quad fired.
• Yes, the pump is plugged. Yes, it leaks and I don’t plan to fix it in hopes I can maintain war-legality.
• Krylon fusion white and black for the main. Krylon metallic gold with clear for the trigger and back ring.

[hola]

Here's my lnl like crossfire with a nitefinder plunger rod.

IT HAS A SLIDE!

[jerm78]

Universal clip system

[Fome]

My Titan. Shotgun turret, cpvc barrels. Can fire 15 darts at once and then quickly swapped to do it all over again. Turret = rear loading too. The protrusion in front is to support the massive weight at the front of the gun.









My Magstrike. Go here for more info. Updates on page 2.

[atomatron]

My Secret Shot 2, the easiest mod I've done in a while.



I basically cut the barrel, took out the AR, super glued the barrel back on, hollowed out the back of the secret barrel so that a dart can fit through and I superglued the yellow rubber part back on. The stock barrel acts as a coupler for the medium wall PETG with a 17/32 brass stub in it, but I have found it fun to use the secret barrel as a breech of sorts; with a flick of the wrist it goes up, I load it, pump 10 times, press the upper trigger and fire. I don't have ranges yet but with the 6" speed loader it can punch holes in a box so probably 90+.

[1337]

Wow, I need to vaccum the floor...


Modified by OMC.


No, that barrel in the back is not for the NF.

[zipx]

My gheto-finder. Failed paint job, LSFG grip integration.



And what could be more gheto than a poorly made rear-loading cpvc 2k turret?

[white moonlight]

And the Shells...



Used this mod...
http://nerfhaven.com...=0

For any questions PM me, but it's all really right there in the writeup.

Now a few extras.
Just recently revamped my Mega Missile.







This is also my "Storm" Water gun.
Not the best, but a 30 second mod and first water-nerf conversion.



For any questions PM me.

Edited by white moonlight, 04 November 2009 - 06:44 PM.

[popatachi]

RSCB BBB

7" CPVC barrel

Reduced dead space:
PVC elbow is nested in the head of the blaster. The plunger goes about 1/4" into the PVC elbow.
The elbow and tee tubes were cut in half.

Drilled two holes into the tee and covered with plastic to see if there's a dart loaded into the barrel.
PETG breech.

Holds 5 2" stefans or 6 1.5" stefans.

Edited by popatachi, 05 November 2009 - 09:14 AM.

[Ryan201821]

Rear-loading madness.

[NerfPancakes]

Modified Nerf Stormfire With Barrel Replacement And NightFinder Plunger Rod:


Any questions please PM me.

[Ryan201821]

Added a stock and some new barrel spacers. It needs a new pump though. Probably a Hornet pump.



Hand cannon. I basically did everything in Hipponator's write-up except for a few change in the coupler system. Right now the springs are too beefy and I can only prime it to the 7th notch. Still shoots pretty hard. These are built much better than the PAS.

[princexbuster]

I've been bored lately

That is a 3k turret and no it is not rear loading.

Kickin' it old school!

Gets better range than the nitefinder ( nitefinder gets around 60ft)


That is sweet, three of us posted at the same time.

Edited by princexbuster, 08 November 2009 - 10:42 AM.

[cheesypiza001]

I just finished my rear-loading AT3K. It is extremely powerful and is complete except for the spacer plate which I will hopefully be receiving soon, after waiting about 2 months. I basically did what is in Ryan201821's writeup except that I setup the turret in a different way and I used a Magstrike pump as apposed to a hornet pump.

Anyway, here are the pics...

[white moonlight]

My LB I decided ot CPVC it because I only plan to use stock darts with it.



Second my PS. Bough it from DB a while ago and it has since gotten a new barrel.



Then lastly my Spiderman Spring Wrist Blaster Thing.



For any questions PM me but it's all pretty self explanatory.

[bigred1rifleman]

Needs more blue paint.

[NerfDude1138]

Yo peeps, I got some photos for you. There were four of these guns in the batch I just finished, each is modded to take Vulcan chains:



Yeah I went a little nuts...

My Favorite...

[Lucian]

Wip:





Air-Brush pratice:

[NerfDude1138]

Spy Gear Signal Launcher - Coupler Mod


This is a quickie coupler mod for the Spy Gear Signal Launcher. There is nothing too new here so I am not going to do an official write-up. The Signal Launcher is essentially a very compact BBBB style weapon that is designed to launch foam rockets. It is easily converted to Stefans by cutting off the forward tube and installing a coupler, done.


I chose to go with CPVC here because I wanted to be able to switch back to the rockets if needed. The CPVC fit the rockets best. One could just as easily use a PVC coupler and a PETG lined PVC barrel. The Signal Launcher is a nice weapon when converted, its biggest score over the Big Blast being its compact size with equal air capacity. Yes, equal! The air chamber has the same dimensions as the BBBB air chamber.

The paint is Warhammer style paint applied using spray and brush. Enjoy.

-ND

[NerfRogue83]

Something new--at least to me. Recon shell, AT3K tank, Titan pump, 12" nested PETG speedloader, N-Strike stock operates the pump. Ranges are standard singled 3K ranges after 4 pumps. This thing is SUPER comfortable, and very easy to pump.







...and equipped with my DBNF front-loading brass breech....

[numa-t49]

It is done.

My Interpretation of the Crossbow



The stock



Front view



The Payload.........A 3in inline clip.



Range: 110s for LS, 50s for the DS
Comfort: Amaizing
Accuracy: If you are within range start counting
Difficulty to build: Ehhhhhh
Will it be painted: NEVER, It ranks to high on the ghetto scale

Comments or Questions PM me.

Edited by numa-t49, 10 November 2009 - 06:15 PM.