5162 replies to this topic

[ompa]

Vim Fuego, you have some really nice work. Should have expected no less from the Aussie crowd I suppose.

Almost complete minus some logos and minor work on the stock and front end of the gun, Borderlands 2 shotgun inspired Sledgefire:

[Cornflake]

Found an old Longshot in my garage and decided to modify it.



Nothing special, I relubed it, removed the locks and air restrictor (mostly), and gave it a spring upgrade.

[Emote]

Blastzooka in a tornado shell, made to look as stock as possible. It pumps with the tornado cocking mech.

[ilikefish58]

[Majestic]

A pair of commissions. Grey vinyl dye primer, then black as a base coat, every thing else is hand painted with Citadels. Internals are the Blasterparts metal kit, and I removed the dart posts.

Scorpion




Sub-Zero



The pair together on delivery day.

[Majestic]

A few Air Max 1's for your consideration,



Basic breech loading, the write-up can be found here



Integrated Hammershot.









Integrated Sweet Revenge. Fully maximized with 6in brass barrels, rear loading slot, spring spacer, LED's that activate on trigger pull, and months worth of shell work.

[East21]

First integration w/ ZSLS and undermounted strongarm vinyl dye paint

Edited by East21, 16 September 2015 - 01:53 PM.

[Mehku]

Sticking brass tubing into random shit since 2007 because I can



There's a small stub of 17/32 brass in each barrel so the elite darts don't fall out like in my previous splitfire build. The pump isn't plugged but if I did the darts would just explode or some shit because this is already pretty powerful.



Also, this. Shoots darts with a seal improvement 70 to 100 feet depending on how you angle it.

[paigerow]

I haven't started painting any of my guns yet but lately I have certainly been hording them and taking them apart. This was taken a few weeks ago and since then I have added many more.



Here is my most current list and Mods.
the very first guns,
2x Nite Finder EX-3 revII
AR and posts removed, stretched springs, these things are great and really got me into this mess. Probably going to find more, I want to try that Longstrike nite finder mod.

N-Strike
1x Longshot CS-6
I just finished pulling the AR and added a recon spring to the plunger. I was having problems with firing darts, they seemed to jam up but I just tested it and it is 100% finally.

1x Recon CS-6
I just pulled the spring, I have been having issues with this gun and since I have several others I will probably start experimenting with it

1x Raider Rapid Fire CS-35
haven't done much with this yet, I think I sealed the O-ring last week.

1x Deploy CS-6
stock, I just picked it up from my parents house the other day

1x Longstrike CS-6
what a piece of junk... can't wait to tear it apart and change everything. I made the stock removable.

4x Maverick REV-6
these are what started it for me. Two have the tabs removed for better loading, at least one of them has a spacer stack on the spring. These showed me the importance of a real blaster, I still have fun inside with them, thats for sure.

1x Vulcan EBF-25
got it a few weeks ago, range is crap going to do fun things with it. Maybe i will sell it, I got it for next to nothing!

1x Secret Strike AS-1
...not sure where i put it

1x Rapid Fire AS-20
i just broke the trigger on it, currently working on repairing that.

N-Strike Elite

2x Retaliator
one stock one with sealed o-rings, probably going to mess with upgrades soon, so much nicer then the recon!

1x Strongarm
posts removed for easier loading. I just love this thing after having the Mavericks for so long

1x Triad EX-3
stock but i got it for $1

N-Strike Mega
1x Bigshock
its cute, I like it. Great for chasing the kid around, and i love the darts!

N-Strike Sonic Series
1x Recon CS-6
still stock, might mess with and orange mod works kit or maybe just leave it, I like the way it looks

Dart tag
1x Furyfire
got this late last week for a few dollars, I love the capacity and the pump action, definitely going to get a sweet pant job.

1x Strike fire
found this a few hours ago, love the mounting potential

Vortex
1x Proton
I don't have any discs but once again stupid little money

Rebelle (for my kid)
1x Sweet Revenge

1x Diamondista

BuzzBee

2x Double shot
never would have gotten these before but after reading this forum i realized all the things you can do with even non-nerf weapons. I got them this afternoon

1x RADS 12

Ok here is a picture showing everything else on the list... oh I forgot the Rebelle's, oh well!

Edited by paigerow, 30 September 2015 - 02:04 PM.

[The2ndBluesBro]

This is my modified ERTL Pump Action Shotgun. Pictured with a Shotblast stock with a CPVC stock block so I can prime it against the stock (still need to paint it to match), and a PETG speedloader. This was originally the K9 Special and I was given it to refurb (it was in pretty bad shape). It has the LS, [k25] and stock springs which are giving a lot of power (estimate 90-100ft flat with domes) and the seal is pretty good. 90/95%? Many parts are reinforced so it won't break anytime soon. This was my first paintjob and it taught me a lot about spray painting that I can use on later projects, even though it didn't turn out that well. I used vinyl dye and krylon fusion with a krylon clearcoat.

Edited by The2ndBluesBro, 01 October 2015 - 10:28 PM.

[JodoCast]

So this is my first post here and by way of introduction, here is a pic of one of my fav mods, "The Sidewinder"





It's had a heap of stuff done to it and it shoots well.
There is a Video on my YouTube channel if you would like more details
Cheers,
Jodo

[apocalypticamerica]

The Knightstrike:






4 Victory cosmetic mod (just for fun):

Edited by apocalypticamerica, 09 October 2015 - 06:56 PM.

[Vim Fuego]

I got myself a little rotary tool (a Dremel clone) and decided that a proper celebration required the utter destruction of something.

This one uses liquid masking film and ground spices for a slightly different look to my last rust experiment, and it comes up smelling really nice too.









Dremel destruction ftw! \m/

p.s. Thanks Ompa for the props, but we're representing New Zealand here \m/

Edited by Vim Fuego, 13 October 2015 - 09:18 PM.

[F1Nerf]

My Airtech 2000 and Nite Finder, currently my NIC loadout and my two most powerful blasters. The mods to each are as follows:

The 2k: Rear-loading, 12" petg barrels with 1" brass inserts, plugged pump, new tubing, and an expanded dump valve. The tank is connected to the turret using 1/2" brass & 17/32" brass tubing, epoxy putty was used to fill the gaps in the turret, and craft foam was used to seal the two halves of the turret.

The Nite Finder: Minimization, cpvc half-coupler, 5" cpvc speedloader barrels, reinforced plunger rod, new screw for the plunger head, craft foam padding, double o-rings, Ace #49 mainspring, and upgraded catch springs.

[Vim Fuego]

Magnus with flames on it - I think everything should have flames on it, if I'm being honest...

 

edit:

 

 

Now with added grunge. 

Edited by Vim Fuego, 06 December 2015 - 08:46 PM.

[Telerran]

My two integrated primaries


My Alpha Rayven EAT internals with a Rayven stock




My Stryfly

[SolarFusion]

My Elite-Themed Stampede build complete with a full rewire, LiPo upgrade and bump-fire fix.

Edited by SolarFusion, 21 November 2015 - 01:55 PM.

[Brimstone Omega]

I've been slacking on posting some of my work, too busy modding I guess. Without further ado here's my modded Rayven, I integrated a Firefly Tech battery tray into the left side shell, gives it a bit more response on spin up time, plus I feel it balances out the opposite side of the blaster.

I will post some other stuff over the next few days too, just wanted to get that one up because it's one of my more simple ones.

Attached Thumbnails

• 
• 
• 
• 
• 

[blitz]

No one has an excuse to not buy Buzz Bee Barons at $5. Just wish I could find more. 

Also, 5/8 ID polyester fits perfectly into the mega barrels. Makes coupling a breeze. Adding springs is also really easy. This probably gets around 80' or more. 

Attached Thumbnails

• 

Edited by blitz, 24 November 2015 - 09:11 PM.

[Felix the cat]

I've named it Orna. The sword of the formorian King Tethra. Taken by Ogma of the Tuatha dé Danann upon Tethras death.



Just my third paint job ever. It's going to end up with a pair of MTB rhino motors on a (currently) 2s lipo.
------------------------------------------------------------------

No where near as pretty, this is my attempt to make a steady magnetic headlamp attachment point.







High beam:


Low beam:


Red beam?:

Edited by Felix the cat, 28 November 2015 - 12:07 AM.

[KillZone]

Some of my creations

Attached Thumbnails

• 
• 
• 
• 
• 

Edited by KillZone, 25 March 2016 - 03:41 AM.

[Remzak]

An overhauled Rapidstrike I am working on, has LEDs, A Lipo, integrated Voltmeter, an a full internal overhaul.

Attached Thumbnails

• 

[Brimstone Omega]

Here's a bunch of random stuff. Enjoy

attachment=77:IMAG0091.jpg]

Attached Thumbnails

• 

[ilikefish58]

 

Re-barrelled, added Retaliator spring, and added a rear-loading slot to a Cycloneshock this weekend.  End results are rather underwhelming compared to what I was hoping for.  It's hitting in the ballpark of 70' flat.

[Vim Fuego]

This is the gift that keeps on giving: I got my friend a Star Wars Bowcaster for his birthday, and have since painted it up and am giving it to him again for Christmas! 

 

Since it was brand spanking new out-of-the-box, I started by roughening it up a bit - I used a technique I like to call 'dropping it onto a pebble beach and kicking the s**t out of it' - to add a bit of battle-wear, and then a matt black base-coat. Chewbacca's actual Bowcaster is a pretty boring affair, as it's plain black with a few scratches and that's about it... I decided to give it a little more personality, and so I decided to go with a wooden stock and some brighter metal parts for the knobs and dials.

 

I also held off giving it my normal coat of dirt at the end, as the worn-but-clean look is kind of appealing, but I'll give him the option if he wants it later on...

 

 

 

 

P.S. If you're thinking of getting one of these to mod, whatever you do, DON'T attach the bow to the body when you take it out of the box. It clicks into place and locks the blaster shut, effectively stopping you from ever being able to open it up to get at the internals.