5162 replies to this topic

[exxodus]

Hello all ... This is my 1st mod & paint job. This is a Stryfe with new motors / heavy duty wiring & runing on 9v ). This is also my first try at painting. My idea was to keep the original design, adding some more realistic paint job, but with a touch of "used cnodition" as it was already used on many battlefields.








Note: On the 4th photo, this isn"t "original blue" going thru the paint but the sky refecting in the paint ..."

[SolarFusion]

XD This thread has been running for over nine years now? That's funny.

Well, here's my contribution:

This is my third mod, an Elite Jolt. It has had a standard AR Removal and O-ring greasing and I am achieving an average of fifty two feet angled with my stefans.

This was my very first mod/paintjob. It got an AR removal, spring stretch, O-ring grease, mini clip, and lock removal. I have not done any range tests with my homemades however I was getting upwards of fifty feet angled with un-modded streamlines when I finished the project.

This is my second most recent job. It got AR removal, lock removal, spring stretch, O-ring grease, removable stock mod, and the lengthened barrel for looks. The barrel extends about another foot and a half past where the stock extension ends. the total length of the extension being about two and a half feet long. I get about forty five feet angled without the extension and about twenty with the extension on.

And here it is, my most recent(and adventurous)mod to date. It got AR removal, spring stretch, O-ring grease, pin removal, and most importantly; the voltage increase. I has a total of eighteen volts hooksed up to it and man, does that thing blast! I would estimate about 400-500 rpm on this thing. The drawback is that with the speed of the motor, it needs some help feeding the belt through otherwise it will skip a few rounds in the center of a belt. No biggie though.

I also have a Maverick that has been finished for a year however it has been partially dismantled for an LED job. Pics later.

I would be interested to hear your opinions!

-SolarFusion

Edited by SolarFusion, 15 August 2014 - 07:08 PM.

[Boris99]

So i started this project a while back while i was bored, but after almost a month of work, I have finally finnished it. I am very happy with how it turned out and I love the franken-blaster look. Everything is explained in the video, watch the whole thing for an "in a nutshell" kind of mod guide, or jus watch the last half for a review. Hope you enjoy!
[/img]
https://www.youtube.com/watch?v=Eb2ykD6QUpM

Edited by Boris99, 21 August 2014 - 07:24 PM.

[SBG]

So, this was my first mod that I began a while ago around May. The mods that I did to it were simple: an AR removal and a lock removal. It works very smoothly and hits around 50ft flat with streamline darts. Also, this was my first blaster that I painted so it's not the greatest paint job but it's pretty good.

Edited by SBG, 23 August 2014 - 05:12 PM.

[clownieX]

Don't normaly post such a simple mod, but I haven't seen one yet. Stock spring and seal improvement. 1/2 cpvc coupler, shoots pretty good. Dark, so no ranges.

[Aeromech]

Shotgun mothafucka

Videooooo

Edited by Aeromech, 27 August 2014 - 09:23 PM.

[tbr]

Finally got around to finishing this one, as with my previous modification, this one was going to be a clean and crisp paintjob until something went wrong :roll:

[xXasskickerXx]

This is my custom longshot : the reaper. It has a BBB spring in it , the ar removed , the slide unlocked, bondo in the grip and the case cut down.
The paint job is only one color and I sanded off parts of the paint to make it blue. It shoots 90-100 feet angled
The Reaper

[Bro Juice]

This is my modded hammershot, dubbed the Hammertime Rev-5. U can't touch this.

[481IceDragon]

Well I got sick of a few people on this forum so I took a year hiatus.
First attempt painting one in a year and I would say Ive still got it!

[KaneTheMediocre]

Here's a pretty basic Sidewinder compatibility mod for Nerf darts (Tagger, suction, streamline, elite, whatever):



Much easier than getting a Tommy 20 or similar to accept Nerf darts, where much more material must be removed AND the flywheels must be relocated farther forward AND it still can't handle streamline darts. Still requires hollow foam darts (ie, not most homemade darts), as the tight part fits the inside on a short peg at the base of each dart hole on the magazine. With great care one could remove all of these pegs, and then nest a tighter barrel material in each socket, but that's too much work for me.

[nisaburo]

The last war I attended made me realize I didn't have a nice pistol. Fixed that.

[Jeef]

My Singled Longshot with an intagrated Maverick

Link to full review on my website:
https://sites.google...intagration-001

Edited by Jeef, 19 September 2014 - 07:18 AM.

[Jeef]

My Overhauled Supermaxx 1500

Link to full review on my website:
https://sites.google...-supermaxx-1500

Edited by Jeef, 19 September 2014 - 07:16 AM.

[Steven firefury]

'Jeef', on 06 Sept 2014 - 12:06 AM, said:

My Singled Longshot with an intagrated Maverick

Awesome! Do they both work at the same time?

USER WAS WARNED FOR THIS POST

Subtitle of the thread is "POST PICTURES ONLY. How hard is that."

Edited by Zorns Lemma, 06 September 2014 - 11:15 AM.

[Green Wing]

Lanard TripleShot with removable Scatterblast integration. More Pictures

Video showing the full build and firing

Edited by Green Wing, 10 September 2014 - 06:42 PM.

[Jeef]

My Hearthstone Themed Nite Finder. LEDs and Flashlight operate off 9v battery in handle and go through switch on 2nd picture

Link to the full review on my website
https://sites.google...one-nite-finder

Edited by Jeef, 19 September 2014 - 07:14 AM.

[geekytyrant]

hello nerf haven!!!!


This is my first post here. I am relatively new to the world of modding nerf guns but by no means new to nerf. Last Christmas, i ended up buying some of the zombieforce guns for my nephew and fiance's son....and myself....after all you must be armed and ready for any attacks. Naturally as it happens with children, they ended up sitting around for about 5 months till i was looking at the Hammershot sitting in the closet and thought, Man i could probably paint this bad boy to look amazing....well better at least. I started going through my paint and what not, being and artist and all i had an arsenal already waiting for me. The first one i painted was the Hammershot, went with a green and black look and added some medical tape to cover the "taped" grip that was already their. I ended up removing all the posts and AR. I left the spring as it was just because i wasnt using it for anything but for show, it was just my first time modding so i wanted to play a little. I ended up taking my dremel to it a bit also, adding some dents and what not. Ended up removing the warning labels and hammershot font, left the NERF on the side so that if it ended up in public people didnt freak.





This was one i did for my nephew. i painted it like how he told me, i let him go with what he wanted
i removed the dart posts and AR only, but i left the orange bits because he would be running around on his street shooting his friends




Now this one i painted on a commission. They wanted a Titanfall themed Roughcut. This one i left everything on the inside because they wanted the staged firing mechanism. They let me have free reign with this so i did so. i ended up bringing it into photoshop and then just laid color over the natural lines and saw what worked the best. I ended up going with the theme that is presented on the xBox one controller. Being that the pump action was the prime function of the gun, i left the area in which the grip flows over unpainted and used the white that the gun already had there. Other than that i went to town on the gun with my airbrush and added a little dirt and muck to show that its been used out in the field and have been knocked about.








im looking forward to doing more just out of the shear fun it is to get these things looking different. Currently i have two more guns in the works, one is a commission of the Star Loards blaster and the other is a gun for myself because i just like the small nature of the blaster..


please let me know what you guys think, comments....complaints....commissions

[zack0909]

My UMB with a 20 inch petg barrel

Edited by zack0909, 17 September 2014 - 07:04 AM.

[Duke Wintermaul]

Some shit I did whilst I was banned, I wish i could say it's good to be back.

180 Rapid Red with 5 tone paintjob, rubberized grips, faux mother-of-pearl grip inlays, 40mm PC fans, and voltmeter. Oh, added a barrel attachment port and a 3/4in coupler to serve as a DIY stock attachment port.





Incomplete 180 Hail-fire with 3 tone paintjob, rubberized grips, custom advance handle (this was a thrift find w/out it), and voltmeter.





The Hail-Fires voltmeter is green, the Rapid Red's is... red.

Both are averaging 123.7feetpersecond and fire frozen ropes with my Koosh darts.

Edited by Duke Wintermaul, 21 September 2014 - 02:34 PM.

[RetroSketch]

So I purchased a stock Mega Centurion.
And Made It my own.
Let me know what you think.

I also removed a grand total of 8 safties/locks.

[Lord Draconical]

Rayven w/integrated magnus, motor swap, full rewire and black / gray paintjob/

Hammershot is a destiny inspired replica, almost purely cosmetic.