Modification and Paintjob Pictures
#2901
Posted 23 February 2010 - 05:08 AM
Hey folks, just finished three commissioned PJs, and starting on four more... Here are the finished three:
Another black LS yes... I know it shouts 'boring' but that's what the customer specifically wanted and I tried to spice it up with combo of gloss and matt black)
-
-
Something challenging this time and I have to say I'm beginning to detest red now for a primary colour... Still, despite the icky result with the red paint, I have to say it didn't turn out too bad.
-
-
-
Least but not last is a purple Raider - I call it "Barney"! LOL! Again this is what the customer wanted...
-
#2902
Posted 23 February 2010 - 10:11 AM
-home made plunger tube
-2 o-rings
-2 longshot springs , bbb spring
-catch and spring renforcement
-pvc stock
-crossbow style priming
-shell minimized
note: not finished paintjob
Edited by AquaPsudo, 23 February 2010 - 10:18 AM.
#2903
Posted 23 February 2010 - 02:42 PM
The twins.....
Edited by NerfRogue83, 23 February 2010 - 02:45 PM.
Rknight-- wow......N9---your dad is in trouble now!
#2904
Posted 23 February 2010 - 03:37 PM
RFR spring, replaced catch spring, recon o-ring and 4 inch Butyrate barrel. Has an awesome fit for stock darts
#2905
Posted 23 February 2010 - 10:58 PM
Also, carbon-fiber reinforced boltsled and the brass breech is enclosed in the stock plastic one:
Raiders with full-length dart chamber:
9/16" main barrel:
17/32" main barrel:
Side by side, partially open (left is 9/16", right is 17/32", left one points up, right one points down)
With stefan drum mag (full breech means streamline drum works too)
⊂3
Kruger and Dunning (1999)
#2907
Posted 25 February 2010 - 06:20 AM
#2908
Posted 25 February 2010 - 11:27 AM
this was painted around last summer, sadly I haven't done any mods to it as I haven't gotten any money to get what I want
-NNY
#2909
Posted 26 February 2010 - 11:58 AM
That golden series is looking great, pjotrkuh!
Edited by bigred1rifleman, 26 February 2010 - 12:21 PM.
#2910
Posted 26 February 2010 - 12:18 PM
Golden Raider:
My golden series:
#2911
Posted 26 February 2010 - 04:01 PM
I was given this POS for free. I'm not sure what was going through Split's mind while he painted it (probably something illegal), but it still shoots well...The spring rest was dremeled off by Split or someone else, and two bolts are being used to replace it right now. The signal light part is missing, so I'm planning on replacing it with a 2k or a 3k.
Edited by nerfer9, 26 February 2010 - 11:17 PM.
#2912
Posted 26 February 2010 - 04:57 PM
Last of the Sex Dwarves, Head of Waifu Relations, Fetishizer of Blasters, The Far Warring, Mini-Van Driver, Possessor of Mattels, and Warden of the Manongahela
We NERF ON all day, and FUCK OFF all night
#2913
Posted 27 February 2010 - 10:15 AM
My first try at painting. I don't think that it's too bad. The other half of the shell is done now, but I can't put it back together yet because I don't have any clear coat right now.
#2914
Posted 27 February 2010 - 11:51 AM
-giant ass plunger tube
-7 inch plunger draw
-raider, longshot, quadshot springs
-shell even more minimized
-unfinished paint job
#2917
Posted 27 February 2010 - 07:24 PM
#2918
Posted 27 February 2010 - 08:29 PM
#2919
Posted 27 February 2010 - 10:28 PM
#2920
Posted 28 February 2010 - 01:41 PM
Almost finished, all I need is barrels (mediumwall PETG) but those have been pretty tough to find lately. To test the power, I held a piece of thickwall PETG, which has a springer-fit on my darts, up to the turret, and it still fired further than just about any other gun I own. In short, this thing is redonkulous.
Edited by Salmon, 28 February 2010 - 10:40 PM.
We're located in I-Don't-Give-a-Damn County, in scenic Shut-the-Hell-Up-achussets.
Maybe you're familiar with our annual charity drive where we ask for shit, and no one gives any.
#2921
Posted 01 March 2010 - 02:38 AM
Both have plastidipped handles, retarded strong reinforcements, are heavy as hell, and shoot really well. Another coat of blue is probably going on both.
#2922
Posted 01 March 2010 - 06:05 AM
#2923
Posted 01 March 2010 - 08:27 AM
Stormfire with an inlaid real wood handle:
Its called a "Foam Dart Blaster" About the size of a colt 1911 airsoft pistol. real cheap:
A commissioned Longshot I did recently, these pictures lack the shotgun grip that was added:
Tech Target for my friend, not a fan of this one:
I got plenty more, but I dont want to repost everything from NerfHQ.
#2924
Posted 01 March 2010 - 01:30 PM
#2925
Posted 01 March 2010 - 05:46 PM
Turret, not shotgun.
Rear loading and write-up tonight.
Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.
Canadian Nerfers-R.I.P.
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users