5162 replies to this topic

[alextwin007]

I present the nightraider


I just finished working out all the bugs. I replaced the reversed plunger with a nightfinder plunger tube, but it’s still set up to work on the same priming handle.

[Norther of Heaven]

Woo, first post in a while.
Overhauled 3K, the works.


Mods:
• 12" PETG Barrels
• Magstrike Pump replacement (plugged )
• Goo Gauge removed
• Manual turret rotation
• Seal vastly improved ( 90%+ )
• Rear-Loading
• Slide installed for easier loading
• Removable ( and modifiable ) PVC Stock
• Firing Pin modded for better airflow




^ Makes stefans MUCH easier to load


Easy to handle.

[Tigadee]

And now the Firefly-style Doubleshots...


You may notice that the DblShot has an actual stock now. I hotglued the cover of the existing stock to be open permanently and then cut a piece of rectangular PVC in half and to shape to act as cover for the new extended stock. Cut the piece of PVC to shape/fit and then drilled a coupole of holes and put screws through into the DblShot's stock.

The DoubleShot's stock still performs the task of holding cartridges and darts [in fact double the capacity now!) and the stock is almost life-sized... Still not sure if I'll paint the stock completely brown or something else like dry-bursh with silver.

-

Edited by Tigadee, 13 March 2010 - 06:43 AM.

[Ice Nine]

Coming at some point eventually: Cosmetic improvement. The gun now actually has a line of sight as well as a comfortable handle at least.

P.S. AWW YEAH, PLAID.



Coming soon: A tour of the Cancer Shack.

Edited by Ice Nine, 12 March 2010 - 10:34 PM.

[Lucian]

Bob II reincarnated, with my airtank+backpack (Picture is crap, sorry):


2 New 2k Projects, the 2 way pump stock is giving me plenty of troube:



Other stuff:

[venom213]

What's this? Venom actually modded something?



Could it be...........





Yes it is. A SSI with replaced internals. Write-up will follow fairly soon. It works fine, thank you very much.

Edited by venom213, 13 March 2010 - 02:33 AM.

[Tigadee]

Here's an update of the white LS I did a while back - Customer wanted the front gun extension on and scope painted to match so I complied:

Edited by Tigadee, 15 March 2010 - 03:04 AM.

[louiec3]

My Mav-Hornet.

[plubby]

I am not sure how to insert a pic into a post correctly, so bear with
these links:
Nothing special, just a Titan with a 1/2 inch PVC barrel




Email me for feedback. ( I know I will get bad comments )

Edited by plubby, 14 March 2010 - 06:23 PM.

[Slagr]

I posted in this thread without original images of my modified or painted nerf gun. My account has been suspended for a month.









Disclaimer: Someone really awesome has edited this post.

[plubby]

I too am retarded, and posted in the paint jobs and modifications thread with neither to show. See ya' in a month.














Disclaimer: It was totally VACC

[compound]

Cobra. "It's sub-optimal, yo."



BnA type blaster, originally the J.A.M blaster by lanard.



WIP EaB. I got it from Vincent a while back, finally got around to doing something with it. If I did the math right, it almost doubles the volume of the PT.



It still needs some dremeling to fit.



Hand cannon. Got it off Ezra at The CT war.



It broke.



Pwnage mellow blaster. Tank extention, FF turret, all it needs is a pump...



... Oh, it also needs a new seal.


Beserker. 4B part has a 17/32 brass barrel.

[HOTH]

Doomsayer #3:



Angel Breeches:



Painted my PAS:


-

-


Replacement PT, for anything, really.



Rear-loading DTB Turret, PETG'd



Rear-loading 1500 turret beginnings. Yes, the washer is screwed up in the center.



Speedloader project. This will be tiring, but worth it and will come with a write-up upon completion.



Thats all for now.

[Lucian]

Here's my Nitefinder Rifle, send me a Pm if you want your very own:




Stud_Muffins, I will be remaking yours as soon as I get a clear shell.

And onto the finished Bob 2:





I'll get to the 1/2 pvc coupler for the 4B some other day.

[Tigadee]

Lucian - That NF rifle light is sick!

Fireflys [the Nerf gun, not the TV series now] always seem to be far and few in-between for me, so I finally got round to getting one done:

-

-

[firesflame4]

FIrst is a Steampunk sawed off Doubleshot.


Next is a Steampunk Buzzsaw. The black is were I need to do some touch ups. I need to buy some paint to do that still.


Last is a Steampunk Scout.

Edited by firesflame4, 17 March 2010 - 03:12 PM.

[Noodleownz]

Modified Tetra Strike. Still needs to have a bit of work done to it, and a fluorescent colored PJ.

Edited by Noodleownz, 17 March 2010 - 04:36 PM.

[popatachi]

Simple PAS with regular mods done.



Single Barrel: averages 120'
RSCB (seven 1.5 stefans): averages 90'

[HOTH]

Finished my rear-loading 1500 turret. Can't wait to put it to use this Saturday at Baff 6.

[Prince Valor]

Here is my first attempt at painting a Longshot






SM5K


SM5K and Hand Cannon with detachable stock

[BustaNinja]

My new 3b



It works, and thats all that matters.

[alberty]

These are some fun indoor, stock dart-using blasters.

- singled RFSG (I didn't choose to single it, bought it used/pre-modded and just tidied it up) - CPVC coupler
- Lanard Shotgun (aka Air Zone Triple Strike at TRU) - CPVC barrels temporarily just placed into stock turret disc
- BBB + Marvelous Hornet "integration" - Crayola barrel in BBB, Recon spring and PVC coupler added. Hornet tanks have ARs removed, an SMDTG trigger controls them, and is plugged as well (I put this in the picture because I securely replaced the Hornet pump with a Magstrike pump since the first time I did this).

Edited by alberty, 21 March 2010 - 01:35 AM.

[louiec3]

Thanks to Mehku I now have a splitfire called cupcake.
I went to work on it to get it in the best shape I could.

I needed to replace the barrels because my darts were too loose in them.
I used 9/16 aluminum tube I found at a local hobby store. The dimensions written on it were 9/16x.029x12.

[Warthawk]

Hey guys. I'm not sure if I posted the right place, because someone told me to post it here, but heres my arsenal?



From pic above:
2 Mavs, Recon, Strikefire?, Eliminator, and Secret Strike.
2 NF, SharpS 1, SecretS 1, LnL, NB-1.
and next to them are a Hornet and a Lanard Scatter Blast which you cant see.
All stock except the DT NF.




stock LS with a yellow LS scope given from a friend.



stock BBB and FireFly



Rapid Fire 20 (target version), BB, Tommy 20, DS, Rapid Fire Rifle, and the SuperMaxx Buzzer Air Bazooka thats now leaking a little.



Reactor and Buzzsaw.


I'm too lazy to organize my guns, so i just took pictures where they all are which were taken from my phone.

[nisaburo]

I call it a Mav-con and its my new HvZ blaster.

I always felt the recon's slid would make a better fore grip. Pm me if you have a ground breaking suggestion for what to put in the big gap. Right now I'm thinking an integrated flashlight above the barrel with the gap for battery space.