5162 replies to this topic

[death by cheez]

My 4B, it's CPVC coupler modded with a 9 inch barrel, though it has a 12 inch for actual shooting and a 6 inch for the missiles.

WIP, my semi-auto 3k, though I need 4 different parts for it in order to finish it. EDIT: Note to self: when pressurizing something that may explode, have some sort of shield between you and it. Practically shot myself in the foot with one end of the bladder.

My entire arsenal. The little black thing with the duct tape and masking tape on it is my "dagger."

Edited by death by cheez, 15 February 2010 - 08:59 AM.

[AquaPsudo]

Singled longshot with shotgun titan integration

[Outcast100]

My Titan.

Side/Full view.

Barrel View(No attachments)

Pump View.

Dual Barrel Attachment.

Single Barrel Attachment.

Gets about, 70-80 ft with Single Barrel, And about 30-40 ft Dual Barrel. It is not plugged.

Questions? Comments? Props? Flames? Flames go into the trash bin, Comment go to my PM box, as well as questions, and possibly Props.(Personally, I would like the delivered Via Mail. The props I mean)

[Whisper101]

OK, time to get some more hot, steamy, pictures of guns with HUGE barrels up onto the boards (added that hilarious quote to my signature, while playing with my butthole anyone?). Anywhom, here they are:
My AT2k( Its been sanded for painting, bu the pics make it look sorta like urban cmo from CoD):


full body

I know it's hard to see but the check valve on this bad boy busted. I repaired it with a free sample courtesy of Ark plas products. Everyone should definitely check them out if they need a new check valve. I've got a billion spares too...

front view, you can see the CPVC barrels. They're 5.5" long and are soon to be replaced with PETG!!!

Next we have my Cyclops, constructed from the Point Blank's writeup:


I did not change anything form his designs so all creativity credit goes directly to him. I just thought it was such a clean, beautiful, awesome idea that i simply had to make one for myslef.

I added 3 layers of craft foam to cushion my knuckle while pumping.

Barrel view. This is also going to be replaced with some PETG as soon as I get it.
No, the barrel is not crooked, it's just the camera angle.

Questions? Comments? PM me.

Edited by Whisper101, 17 February 2010 - 12:30 PM.

[Lucian]

I'm not sure if this looks sloppy or weathered. I'll probally add atleast 3 more coats of red.


But my cat seems to like it!

[Cannonball]

I've been keeping this one under my hat for a couple of months now, but since I don't have too much time to perfect it, I figure I'd just put up what I've got. It's an at3k and a signal launcher tank, hooked up to a dual action bike pump. They're both separated by their own individual ball valve. (you can see the one linked to the at3k tank at the top. The one hooked up to the signal launcher tank is attached to the other side of the shell.) That allows me to pump each individually. I didn't have any check valves so I worked with what I had.

For some reason, turrets seem to hate me, but this one turned out alright. The rotation mech. is a little finicky, but it still works. I haven't ranged tested it officially, but from what I've seen; it's doing an exceptional job of putting my darts downrange. The signal launcher tank is set up with a ball barrel. It does it's job. I've been having more than my share of problems with the pump so I might just change it out when I finally decide to actually perfect it.

And every Frankensteinish blaster needs a flowery tabletop.

[Hippopotamus]

Hi folks, It's hippo here, and I'm gonna kick my membership off with some mods:



Here's my current primary, at this stage it was minimized, pullback, had a NF spring addition, and a PVC barrel chambered for mega's, it is now minimized further and sports a PVC coupler.



This is an older picture of my SupaSplat, which now features a paintjob, and sports a CPVC barrel. Since this image has been taken, it's range has degraded, but it served me well at BAFF 4 and 5.



This is my PPK'd diskshot, it now features a stubby CPVC barrel as opposed to the stock SupaSplat barrel it has in the image, it's pretty inaccurate, and has a NF spring added as well.



This has been passed on to my guest, who has used it at BAFF 4 and 5, it's crayola'd and sports a crude acrylic paintjob.

[Fome]

My mav titan with break action barrel using 1.25" PVC and 3 barrels of CPVC.





Paintjob going on when it's warmer than 50 degrees outside.

[Merzlin]

My Nerf Crossbow

VIDEO EXPLAINING IT ALL







My new favorite primary.

[NerfRogue83]

Deploy......with a little extra kick.....






Write-up Here

[Collective]

A few older blasters:



The LnL is modded a la popatchi, and the Spitfire has a brass breech on both sides for easy loading. They can be pulled out separately or one at a time.

Edited by Collective, 20 February 2010 - 09:53 PM.

[Ice Nine]

Contracted Rapid Fire 20.



Polyester barrels, shoots stock darts forties with stock internals. Definitely improved the turret. Good times.

[Ryan201821]

Brass breeched awesomesauce Longshot. +bow spring, carbon fiber boltsled reinforcement, plunger head cushioning, sub-optimal seal, integrated blowgun, and also unstoppable with one of Zorn's modified Raider drums. Shoots through cardboard effectively. This will be good times.





Finished Tornadobow for Daniel Beaver. I finished this up at 7:30 this morning. It's sub-optimal, yo.





Contracts





Shooting DemonLord in the head with the sub-optimalest +bow in existence.

Edited by Ryan201821, 21 February 2010 - 03:15 AM.

[xbox180]

Ok here are my guns



Singled Longshit Kickass-Ness:
Tango Singled using Cpvc
Massive spring Adds(BBB LS and 3 other nightfinder like springs)
99% Airtight
Clean 2K intergration, Pump is pumped by the orange priming bar. Has a 3/4 CPvc coupler and a 1/2 Cpvc Coupler. 4 dart Inline clip. Fired by Key ring. 80-90 feet
Other basic shit.
100 feet constantly





Old pullback longshit



Cobra Pushing 160



Rear loading @k, Pimpness





Amazing Nightfinder:
Extend Draw, Sihtload of spring renforcments and more.



Kickass PS
80-90 CPVC coupler

[soccerbeast003]

Overhauled 3k with a very comfy stock:

[Lucian]

Contracted by Stud Muffins:








12volt Light up skull from autozone, 15 inch plunger, [k26] spring.
Still waiting for Catch and Plungerhead, and a clear nf shell

[Stud Muffins]

Overhauled 3k with a very comfy stock:
*Gun porn*

That stock's got balls.

My mav



New Titan Pistol

Edited by Stud Muffins, 21 February 2010 - 05:15 PM.

[nerfer63]

I got a new primary



cpvc couplered and reinforced.

[NerfRogue83]

Brass Breeched Deploy!

[popatachi]

My WIP: Longshot with brass breech, reinforced sled, better springs, plunger head replacement, and additional gaps covered up. All the markings have been sanded off. It is primed with the CPVC handle attached to the top of the bolt sled. The front gun will soon be integrated with an AT2K. I removed some of the stock to give it a little bit of a unique look and when it gets warmer outside, it will get painted.

[Ice Nine]

The U3 worked on a Crossbow shell.



You should watch a video of us doing it.

[AquaPsudo]

Longshot wip

[pjotrkuh]

Golden, steampunkish project:

[Ryan201821]

Longshot w/ Raider Drum Firing Video



WIP 1500

[Ice Nine]

Tornadobow and my Pistolround Splat.

The PRS was an exercise in poor engineering: I needed it to shoot under sixty five feet for use in pistol rounds. Chose a poor barrel length and the weakest spring possible and bam, right under requirement. Perfect.

Tornadobow is shooting almost as far as Ryan's +bow. Which is a lot.



Forgot to put the yellow piece back in after disassembling. Whoops!