Jump to content


Photo

Homemades Picture Thread

Photos of Homemade Nerf Guns

1306 replies to this topic

#1101 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 24 June 2013 - 12:56 PM

Posted Image

The notorious black bar from a Maximizer. Now in aluminum! (Not completely done, still have to put a UHMW insert along the bottom so the plunger rod has a super smooth surface to slide on).
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1102 Pointman9

Pointman9

    Member

  • Members
  • 131 posts

Posted 26 June 2013 - 05:46 PM

For the past week, I have been working on this thing:
Posted Image
This is my first attempt at making a +bow-like blaster without using polycarb, a drill press, or a scroll saw. This prototype came out rough, the bolts are way too long, and I have yet to mount an actual handle or stock on it yet. That's coming up next.

This blaster uses an adapted version of a +bow catch.
Posted Image

But the thing that makes this blaster really special is the spring.
Posted Image
The spring on the left is the one I used. It is a 9637K12 spring from McMaster, and it features a compression strength over twice that of a [k26], which is shown on the right.
Unfortunately, the plunger head I used with it did not withstand the forces of test firing today, so no range results yet.
  • 0
There is no such thing as overkill. There is only cost efficiency.

#1103 KaneTheMediocre

KaneTheMediocre

    Belligerent Asshole

  • Members
  • 613 posts

Posted 27 June 2013 - 01:29 AM

The BullPAC 5
Posted Image

2" PVC x 3.5" of draw with great airflow, low friction, and very little deadspace. Not a particularly impressive seal, but it still seems quite efficient-About the same as the conventional PACs. The priming force hasn't been measured, but it doesn't feel like it's any greater than a 1 1/4" bore PAC with similar performance. Based on the difference in bore, I would have expected twice as much force to get the same pressure (and hence performance) out of a 2" bore blaster like mine.

This definitely has the best performance and efficiency of any of the bullpup blasters that I've built. I'll definitely be making more of these for Cataclysm.

Right now it's using a segmented barrel 1/2"CPVC/SCH80PVC, but it shows similar performance with PETG (very loose, ~.53" ID). Performance with an entirely cpvc barrel was fantastic, but I didn't feel comfortable using something with that much power on people, and the silicone domes aren't stable at that power when fired out of conventional hoppers. No real measurements, but it probably shot as hard as a typical +bow.


It feels ergonomically fantastic. The length is still 28" OAL (24" w/o stock), and the larger bore in the rear greatly improves the balance of the blaster. I especially like the view when you rest your face on the plunger tube:
Posted Image

Edited by KaneTheMediocre, 27 June 2013 - 01:34 AM.

  • 0
RAINBOW CLAN FTW
I'm Purple

My Half-Baked MHA Site

#1104 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 28 June 2013 - 02:54 AM

Posted Image

Bit of a preview of what's to come for Apoc. I'm making 4 variations on this (two traditional +bows and two pumpbows). 3D printed grip, pump handle, and stock plate.

Edited by roboman, 28 June 2013 - 03:43 AM.

  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1105 CigarBaby

CigarBaby

    Member

  • Members
  • 52 posts

Posted 29 June 2013 - 05:20 PM

I made these a while ago but realized I had never posted here.

Aabow

Posted Image
Posted Image

I later converted the Aabow to a Snap Crossbow.

Posted Image
Posted Image
  • 0

#1106 TheSilentRebel

TheSilentRebel

    Member

  • Members
  • 172 posts

Posted 29 June 2013 - 07:56 PM

Oh yes.

Posted Image

Features:
1. Supah easy prime.
2. No 3D printed parts.
3. Rainbow Catch.
4. 99% Seal.
5. The ability to shoot ropes.
  • 0
We are men of action, lies do not become us.

#1107 Pointman9

Pointman9

    Member

  • Members
  • 131 posts

Posted 30 June 2013 - 12:01 PM

Mounted the handle and stock on my +bow thing today. Also range tested. With the very high friction plungerhead and over 1.5 inches of deadspace in the plunger, I'm still getting about 120 feet out of it. This shall be improved.

Bow shown with stock and handle, plunger at rest:
Posted Image

Shown here primed:
Posted Image
  • 0
There is no such thing as overkill. There is only cost efficiency.

#1108 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 03 July 2013 - 01:43 PM

Posted Image

Progress on the pumpbow prototype.

Posted Image
3D printed 2K turret. Seals great, fits 5/8" OD barrels, and is rearloading.

I'm probably gonna start selling them for $10.

Edited by roboman, 03 July 2013 - 07:15 PM.

  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1109 Plopper

Plopper

    Member

  • Members
  • 27 posts

Posted 04 July 2013 - 10:31 AM

Now I have something worthy to be posted in this forum.
Posted Image

Snapbow. Made by imodify, tuned up by me. The old sealing washer was shreaded to hell when I opened it up, so I putted a new washer on it. works much better now.

Posted Image

Posted Image


Will have swagtastic stickers on it when I feel like getting some.
First one on the 75th page and post # 1111. Hell yea.

Edited by Plopper, 04 July 2013 - 10:33 AM.

  • 0
The picture says all. I am the wise man.

(\__/)
(+'.'+) This is Bunny. Copy and paste bunny
(")_(") into your profile to help him gain world domination. (yes i found this on another profile)

My Blog
-plopper

#1110 modsfornerf

modsfornerf

    Member

  • Members
  • 85 posts

Posted 14 July 2013 - 08:13 AM

Built a new snapbow.
Posted Image
Posted Image
  • 0
Check out my youtube channel My link
Also check out my blog: website

#1111 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 14 July 2013 - 06:50 PM

Posted Image
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#1112 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 15 July 2013 - 06:39 PM

Posted Image

Final revision of the printed 2K turret. Uses a 1/4"-20 bolt as the pin, which provides adjustable spring tension.
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1113 Glory1610

Glory1610

    Member

  • Members
  • 43 posts

Posted 18 July 2013 - 11:05 PM

My first RainBow pump. Not so clean looking, but it has charm and it works great nonetheless. Finished it about 2-1/2- 3 weeks ago. I was maintaining it for tomorrow's SLANG war, so I figured I'd take a pic while it was out:
Posted Image

Also had my old R3L out so I snapped a pic. It was my first homemade, it's been through many battles, and it has been repaired many times. Hence the "ghettoness".
Posted Image
  • 0

As Panda said, I don't think there is a way to fight gravity without a guaranteed loss. You could use magnets, but no one knows how those things work except the Mormons.

Or lasers. You should integrate some lasers into your Nerf darts. Problem solved.


#1114 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 23 July 2013 - 03:15 PM

Posted Image

I printed a bunch of turrets. (Yeah, that's a 3K one on top)
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1115 Shoopy

Shoopy

    Member

  • Members
  • 208 posts

Posted 24 July 2013 - 07:44 PM

Commission for Craftsman. 12" plunger tube. 4.25" of draw. LDPE handle, Plunger head, and catch. Rainbow.
Posted Image

My old snapbow repainted. Glittery purple. My most reliable blaster.
Posted Image

EDIT TO AVOID DOUBLE POST:

This is my rainbow pump variant. It was mostly made of recovered parts from old WIPs and blasters.

Rainfire: plunger rod
Old rainbow pump: pump sheaf/handle & catch
Rainbow Pup by Ryan: LDPE handle/trigger
PAC bow: stock
Pumpsnap: plunger head, front bushing, & spring

All I had to do was make the body and assemble it. I wanted to make a quick pump action blaster as a back-up back-up for APOC.
Posted Image

Edited by Shoopy, 25 July 2013 - 01:13 PM.

  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#1116 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 26 July 2013 - 05:21 PM

Posted Image

Finally done with the sideplates. 8 hours of machining remaining for the other parts.
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1117 Glory1610

Glory1610

    Member

  • Members
  • 43 posts

Posted 27 July 2013 - 07:50 PM

RainBow PAC. I love this thing! (Even though its the size of a tree) :lol:
Posted Image

Posted Image
  • 0

As Panda said, I don't think there is a way to fight gravity without a guaranteed loss. You could use magnets, but no one knows how those things work except the Mormons.

Or lasers. You should integrate some lasers into your Nerf darts. Problem solved.


#1118 mysterio

mysterio

    Member

  • Members
  • 249 posts

Posted 28 July 2013 - 02:09 AM

Posted Image

Posted Image

New homemade, no name yet. Writeup to come soon.
  • 0

If two powerful is a problem then just go with one powerful. I guess this style of hopper will work even beyond three powerful..


15:46 *** Buff is now known as TheGdiddler
15:51 TheGdiddler I'M GONNA GRAPE YOU"

#1119 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 29 July 2013 - 02:38 AM

Posted Image

30 aluminum pumpbow sideplates. Cut free from the sheets, sanded, drilled, and wire brushed. I'll probably end up polishing them lightly to smooth out the surface a bit more, so you get the textured look of brushed metal without the roughness. The main issue will be removing the polishing compound from the surface, as I found out earlier today when I tried it on one plate. It ended up taking me about half an hour to scrub the rouge off of the plate.

My new wire wheel/buffer is in the background. I highly recommend them for anyone who does a lot of work with metal, since it takes care of deburring for you. That one is currently on sale at Harbor Freight for $40, and the brass wire wheel is another $5. Works great. The buffing wheel lets you have very high-polished surfaces if you use the right compound for the metal you're polishing.
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1120 Drev

Drev

    Member

  • Members
  • 135 posts

Posted 30 July 2013 - 10:25 AM

This is my first +bow.
Posted Image
  • 0
Check out my blog: Fly Nerf

#1121 ChaosPropel

ChaosPropel

    Member

  • Members
  • 586 posts

Posted 01 August 2013 - 08:48 PM

Double Rainbows are the best and Koree's the coolest for pushing the design through his birth canal.

I made a Double Rainbow today.

Posted Image

There is a dinosaur on my Double Rainbow.

Posted Image

She has pretty blue eyes. Like Ellen DeGeneres.

Posted Image

These are her buttocks. They are nice buttocks.

Posted Image

Shown here with a swagful dart pouch I made for the war this Saturday. The dart pouch also promotes world peace.

Posted Image

Shown here with a swagful pump grip I made for it (HDPE) that I won't be using because it promotes white supremacy.

Posted Image

Closeup on the pump grip for the white supremacists viewing this post.

Posted Image

Here's what I'll be seeing all day Satruday. Just add a few ugly men in front. Use your damn imagination.

Posted Image

Here's your porn.

Posted Image
  • 0
Preheat oven to 350 degrees F (175 degrees C).

#1122 Alfatrooper

Alfatrooper

    Member

  • Members
  • 93 posts

Posted 03 August 2013 - 08:12 AM

First real homemade. Snap bow MkV.

Posted Image

Stock attachment.

Posted Image

Trigger closeup.

Posted Image

Bottom of the handle.

Posted Image

Here is a video of the blaster.
  • 0

 See you on the field, Alfatrooper                                                                                             My YouTube


#1123 Ungodlyfreak

Ungodlyfreak

    Member

  • FNG1 
  • 1 posts

Posted 05 August 2013 - 01:55 AM

Posted Image
Posted Image
Posted Image

This is my first [working and complete] homemade, a bolt action, Clip Fed SNAP rifle.
Uses standard clips with a custom brass/pvc hybrid breech. Barrel is 16mm Australian electrical conduit,and is 400mm long (from memory).
Wood body is exactly 1m long.
Shoots fairly hard, though i haven't yet done a proper range test. I would estimate approximately 50 to 60m, angled.
Spring is a full [k26] with about 7.2" draw.
When i get the money, I'll be adding tac rails to the bottom of the front section (before and after the clip) for a bipod and foregrip. I'll also be putting a rail on top for a holo sight.

Edited by Ungodlyfreak, 05 August 2013 - 02:00 AM.

  • 0

#1124 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 09 August 2013 - 12:46 AM

Posted Image
I tried vapor polishing a 2K turret.

I really like the results, and it prevents the o-rings from popping out of the groove.
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1125 Littlemisterbig

Littlemisterbig

    Member

  • Members
  • 10 posts

Posted 12 August 2013 - 07:17 AM

hey guys im thinking of building a spring powered spartan ncs-12 with a similar mechanism to the mega centurion so if you could please give me some feedback that would be great.
Thanks

http://nerfipedia.wi.../Spartan_NCS-12

USER WAS WARNED FOR THIS POST


Nevermind that this is a "please tell me how to build this gun" request, which we don't do around here...and that there isn't a capital letter or punctuation mark to be seen in your post. What I want to know is why you posted this in the homeades picture thread.

Take a few days off and Read Moar.

Edited by Carbon, 12 August 2013 - 08:54 AM.

  • 0


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users