- NerfHaven
- → yksnerf's Content
yksnerf's Content
There have been 8 items by yksnerf (Search limited from 27-December 96)
#299235 Tyco RC Rapid Assault
Posted by yksnerf on 03 June 2011 - 06:20 PM in Modifications
~yksnerf
#298613 My Scout Went to the doctor today
Posted by yksnerf on 25 May 2011 - 06:38 PM in Modifications
First off, MIG, great idea and use of a syringe, it's really creative. I have had one of these syringes and was wondering about it's uses for Nerf.
The syringe head (at least in mine) has a very tight fit inside the syringe tube. My guess is it would have friction issues. Also, the head is not screwed onto the "Syringe Rod" and you would need to cut it off, which wouldn't work because I cannot think of an adhesive strong enough to hold the head on.Did you not use the syringe head due to friction issues?
If you mean just the rubber seal of it, I doubt it would fit onto the plunger head straight, causing seal issues.
~yksnerf
#299181 My Sneakshot gets a transplant.
Posted by yksnerf on 02 June 2011 - 11:49 AM in Modifications
I'm assuming that you'll be modding the stingray next. Am I correct?
When he said:
Operation No. 2 coming soon; The Augmentation!
My Sneak Shot gets some air!
I assumed that he'd be putting the air tank of the Stingray into the Sneakshot. Correct me if I'm wrong, MIG.
~yksnerf
#298993 LS help
Posted by yksnerf on 30 May 2011 - 05:58 PM in Modifications
But if you don't hear it, it's fine. Just plug your ears when you shoot it.You don't want to hear the snapping of plastic if it breaks...
Seriously though,
but try to cut it properly so that the spring rest doesn't stop the travel of the plunger rod.
I don't get what you are saying here, there's no way that you could make it so it doesn't stop the plunger rod travel.
~yksnerf
#299119 reverse plunger reinforcement question
Posted by yksnerf on 01 June 2011 - 11:00 AM in Modifications
~yksnerf
#298950 LS help
Posted by yksnerf on 29 May 2011 - 10:34 PM in Modifications
~yksnerf
#298618 broken air compressor tab
Posted by yksnerf on 25 May 2011 - 06:57 PM in Modifications
If you do, I would say PVC Cement, Solvent weld, Contact cement, JB Weld, Epoxy, or Epoxy putty would repair it adequately. I would recommend sanding the surface first though, to make a stronger bond.
~yksnerf
- NerfHaven
- → yksnerf's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·