- NerfHaven
- → Inferno Falcon's Content
Inferno Falcon's Content
There have been 74 items by Inferno Falcon (Search limited from 12-December 96)
#293749 Long Strike With Missile Blast Internals
Posted by Inferno Falcon on 02 February 2011 - 08:14 PM in Modifications
#293531 The "official" Texas War Thread
Posted by Inferno Falcon on 29 January 2011 - 10:26 AM in Nerf Wars
#293498 The "official" Texas War Thread
Posted by Inferno Falcon on 28 January 2011 - 02:12 PM in Nerf Wars
#293488 The "official" Texas War Thread
Posted by Inferno Falcon on 28 January 2011 - 10:22 AM in Nerf Wars
#293470 Homemades Picture Thread
Posted by Inferno Falcon on 27 January 2011 - 09:51 PM in Homemades
Blowguns can actually be very effective when used correctly, but one of their bigger downfalls is that since you need a very long barrel to get good performance with one, it's hard to carry them unless they're your primary blaster. This is especially an issue since blowguns are a great secondary longish range weapon, for if your primary blaster jams, or you run out of darts in your hopper and don't have time to reload it. Here's an idea to overcome that.
I drilled through part of the tee with a dremel drill bit. Then I put a bandolier thingy through it. I used 3 feet of pipe, and the strap was easily adjustable to be quite snug when on my back. I can easily run with this on, and is very light.
1/2 Sch. 40 on the top for tagger darts, and thickwall pvc for stefans. (mcmaster part 48855K21)
I can get about 65 feet with slugs at very slight angle. I really like this setup and hope to use it at my next war.
#293440 Xbox Live Recreational Community House ---
Posted by Inferno Falcon on 27 January 2011 - 12:31 PM in Off Topic
-InfernoFalconn
Games I play:
-Skate 3
-N+
-Soon Halo 3 / Reach
(Just got xbox)
#293396 Scammed Again For $190!
Posted by Inferno Falcon on 26 January 2011 - 02:33 PM in General Nerf
I don't know about you, but it takes some serious effort to build up a positive reputation here on the Haven as a good Buyer/Seller. Maybe you should think about selling in our threads.
Although that seems like a great idea, the cold hard truth is nobody here is going to want to buy a shittily painted black and silver recon. Not even for $40. He was selling something that only stupid children on ebay would buy, and guess who bought it? A stupid child on ebay.
#292942 The Mave
Posted by Inferno Falcon on 16 January 2011 - 03:26 PM in Modifications
#292941 Mcmaster Carr Foam
Posted by Inferno Falcon on 16 January 2011 - 03:24 PM in Darts and Barrels
20 feet of mcmaster foam is part 93295K33.
250 feet is 93295K43.
#292876 Mcmaster Carr Foam
Posted by Inferno Falcon on 15 January 2011 - 04:54 PM in Darts and Barrels
It has a slightly larger diamater than most other foams
It has a tight twist in cpvc
It's a bit tight for an airgun fit in thickwall petg.
It fits mcmaster petg (9245K25) Great for a springer.
A good airgun fit for it is mcmaster part 48855K21.
The density is all right, better than most other venues but not as good as swiftnerf or b1g13en foam.
Please not that this is all after heating.
#292745 Which Outputs More Air
Posted by Inferno Falcon on 13 January 2011 - 03:18 PM in General Nerf
#292691 R3l Re-shelled
Posted by Inferno Falcon on 12 January 2011 - 11:56 AM in Homemades
Not only would "snipre" be a bit more unique, but it keeps the "R3"
#292570 Calling All Texan Nerfers 2
Posted by Inferno Falcon on 10 January 2011 - 06:19 PM in Nerf Wars
#292543 Long Range Primary?
Posted by Inferno Falcon on 10 January 2011 - 10:39 AM in General Nerf
I was actually thinking of making a Ja-bow, seen here. It's so incredibly simple that I have to try it. In addition, I will still get a Big Blast and make a RSCB clip for it. Can someone with clip fabbing experience tell me what diameter and types of pvc are used in this image
The OP said nothing about what types and measurements went where and this looks much simpler than the old tutorial in Nerfhaven's mods section. I do know that the joints are 1/2" and there is both CPVC and PVC involved. I just need a description of which is where so I can put one together.
I think this should work out pretty well right?
If you're willing to spend the time/money an aabow would be a much better choice.
#292537 The Compleat Stampede Mod
Posted by Inferno Falcon on 10 January 2011 - 09:51 AM in Modifications
Besides that this mod is "compleatly" awesome.
#292386 Foamtalk: A Nerf Podcast
Posted by Inferno Falcon on 07 January 2011 - 03:00 PM in General Nerf
I recently finished all the old foamtalks and am eagerly awaiting more.
#292385 My Spring Chamber Modification
Posted by Inferno Falcon on 07 January 2011 - 02:50 PM in Modifications
I can't find a link right now, but they essentially did the same thing.
#292017 Guide To Barrel Material
Posted by Inferno Falcon on 01 January 2011 - 05:23 PM in Modifications
Nest cpvc in pvc and them ream it out as if you were constructing a barrel for a hopper. Try to make this as deep as possible.
This should significantly improve ease of loading.
#292016 Hoppers W/ Pistols
Posted by Inferno Falcon on 01 January 2011 - 05:14 PM in Darts and Barrels
#291184 Texan Winter War
Posted by Inferno Falcon on 19 December 2010 - 07:28 PM in Nerf Wars
Talk about a necro.wing'd man is right, Texas gets cold like once a year.
Are there any texas nerfers still interested in something like this?
#291161 Site Linking Help
Posted by Inferno Falcon on 19 December 2010 - 01:16 PM in General Nerf
This will automatically add bbc tags for you.
#289873 "break Breech" For Homemade Shotguns
Posted by Inferno Falcon on 03 December 2010 - 12:11 PM in Darts and Barrels
#289527 Nerf Irc Room
Posted by Inferno Falcon on 30 November 2010 - 07:17 PM in Off Topic
Try joining again, I've been banned from the irc multiple times, and it usually expires in a few hours. If not, pm draconis or obob.I was banned from nerfchat while I was away at school. I'm not sure why. Looking at my logs it seems like they were just dicking around, but they never unbanned me.
<Gears> I don't want to ban him indefinitely!
<Langley> I'm sure someone will reactivate him if it's permanent.
<Gears>Do it Phil
<Gears>Ban N9.
Mode #nerfchat +b *!*@dm-16906.dsl1.ekgv.ca.frontiernet.net by Langley
YOU (N9) have been booted from #nerfchat by Langley (<3<3<3)
#288603 R Series Blasters - Overview!
Posted by Inferno Falcon on 19 November 2010 - 10:20 AM in Homemades
#287857 Guide To Barrel Material
Posted by Inferno Falcon on 03 November 2010 - 03:50 PM in Modifications
1/2" CPVC is way too small (i.e. can't even force the dart all the way in)
Sorry if you've already tried this, but when I first tried using cpvc as a barrel material I also thought it was way too tight. I, however, was just trying to push it in, instead of twisting. If you haven't already, try twisting the foam into the cpvc.
Sorry if that doesn't help you.
#287479 Homemade Air Restrictors?
Posted by Inferno Falcon on 25 October 2010 - 08:23 AM in Modifications
Thanks, that seems very practical and useful.If you're really worried (say you already have an RSCB and still are shooting too far), make it with a 1/2" cross instead of a tee, and run PVC along the top of your RSCB a few inches for more deadspace. That's what I had to do for my modded Iron Man 2 Super Soaker; it was borderline dangerous at Hell Before Halloween 4, and really needed that extra reservoir to be safe.
Granted, this doesn't apply to most things used in Nerf (I had a large amount of power compared to most things), but if you really need to cut range, it works.
#287266 Homemade Air Restrictors?
Posted by Inferno Falcon on 20 October 2010 - 07:49 PM in Modifications
That's a great idea. Thank you.Easiest way would be to put a ball valve somewhere before the barrel in your setup. You could then dial down the air opening or flip it all the way open pretty easily.
(air system)=(valve)==[ barrel ]
#287261 Homemade Air Restrictors?
Posted by Inferno Falcon on 20 October 2010 - 07:34 PM in Modifications
However stupid this may sound, I was wondering if anybody would know how to go about making an "air restrictor" out of pvc which would decrease the power of a blaster when attached via coupler.
The reasoning behind this is that for some game types (Such as zombies) having a powerful weapon is generally extremely erotic, and unnecessary. If you had a way to temporarily limit the power on it, though, you would not have to switch weapons during such game types.
Does anyone else see any merit in such a thing?
Thanks.
#286424 Is A Big Bad Bow Spring To Stong For A Stock Longshot Boltsled?
Posted by Inferno Falcon on 02 October 2010 - 01:29 PM in Modifications
Yes, it will.I'm just wondering if it will break it.
#286420 Is A Big Bad Bow Spring To Stong For A Stock Longshot Boltsled?
Posted by Inferno Falcon on 02 October 2010 - 12:58 PM in Modifications
#285532 Dartsmithing Tips Archive
Posted by Inferno Falcon on 16 September 2010 - 06:34 PM in Darts and Barrels
I can't thank you enough.Sorry if this is a stupid question, but I'm going to be buying material for captain slug's washer/felt stefans, and wanted to know if I could buy the foam in incriments of something between 25' and 250'. Optimally I would like 100'.
Here is the link to the part in question.
Thanks!
Here is what you want.
Same exact thing you linked to, but in 20' sections instead of 250' sections. I know you want it in 25'+, but is ordering 4x25' that much different from 5x20'?
#285506 Dartsmithing Tips Archive
Posted by Inferno Falcon on 16 September 2010 - 02:36 PM in Darts and Barrels
Here is the link to the part in question.
Thanks!
#285504 Guide To Barrel Material
Posted by Inferno Falcon on 16 September 2010 - 02:32 PM in Modifications
I apologize. Thank you very much for your help. I've been looking all day for that.Springer barrel material --> 9245K25Does anyone know if any petg usable by the nic is avaliable on McMaster?
I am looking for a suitable barrel material for springs and air guns that would fit This foam. I would like to stay away from brass if at all possible. What would you suggest?
Airgun barrel materials --> 48855K21
Try searching next time.
#285502 Guide To Barrel Material
Posted by Inferno Falcon on 16 September 2010 - 02:16 PM in Modifications
I am looking for a suitable barrel material for springs and air guns that would fit This foam. I would like to stay away from brass if at all possible. What would you suggest?
- NerfHaven
- → Inferno Falcon's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·