Maverick Master's Content

#77394 Pvc Question

Posted by Maverick Master on 24 March 2006 - 06:48 AM in Off Topic

How big of a grenade do you fricken plan on shooting. Something that big will kill someone.(unless it was a water ballon, but that would be water guns :wacko:

)

#77306 Ocman Octet Flash Game

Posted by Maverick Master on 23 March 2006 - 07:12 AM in Off Topic

Thats really cool from what i've played. Could use a little improvement.

#77305 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 23 March 2006 - 06:55 AM in Homemades

I will try to answer yo question Ronster the cover on the brass will channel the air to the shell.

#77154 Want To Make A Homeade

Posted by Maverick Master on 21 March 2006 - 09:02 PM in Homemades

Some tips from experince,
1. Trigger hardest part
2. Plunger esiest part
3. Use stefans
4. Start simple like the Kiss

These are just some tips from experince.

#77152 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 21 March 2006 - 08:50 PM in Homemades

I have two questions,(sorry for all the questuons I know you are a busy man)

1. Can you make a cool program showing how it all works like you did with the FAR. Like your desing.

2. Also this may sound like a stupid question but how strong of sprong should I use for a clip that is a the size ofcasset tape?
Thanks for all the help and insperation.

- Mav Master

#77102 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 21 March 2006 - 07:01 AM in Homemades

I already have the right size PETG that fits right perfect into 1/2" PVC. So if thats what your saying then i already have the right sizes.

#77033 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 20 March 2006 - 07:56 PM in Homemades

Ok thanks for that i will look into brass. Also i have some PETG will that work because it dosn't seem that tight.

#77019 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 20 March 2006 - 06:37 PM in Homemades

Bolt since I'm building my own variation of the FAR and this now i'm using 1/2" CPVC for the barrel and shells because I want to shoot micros. Is this what i should be using or something else. Also will your bolt still work on a grvity feed. I think it should but i'm not sure.Finally just amazing, you have really insipred me.(also are you basing your names off of guns from Ghost Recon, SCAR-N=SCAR-H, and Bs-8 Carbine=M8 Carbine, maybe its just me but thats what it sounds like a little)

#76976 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 20 March 2006 - 03:20 PM in Homemades

First sorry the pics wren't working for me and second wow thats not as complicated as i thaught it was.

#76958 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 20 March 2006 - 07:10 AM in Homemades

Bolt on the shells do you still have the ring on the end and in the middle like on the FAR shells.

#76833 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 19 March 2006 - 09:09 AM in Homemades

I know the names are almost identicale but that looks a lot like the M8 carbine(see almost identicale) Posted Image

Also yours dose look great but I think you could make it better by adding the top arch or rail like the M8 dose.

#76794 Vortex Rings Questions

Posted by Maverick Master on 18 March 2006 - 06:48 PM in General Nerf

Ok sorry about that i was just having a bad day and had to yell at someone. Sorry about that but no they don't fit.

#76793 Boltsniper Scar-n Rifle Bs-8

Posted by Maverick Master on 18 March 2006 - 06:45 PM in Homemades

Bolt so are so amazing. How the hell do you do that :blink:

, also i sent you a pm about the barrel i should use.

#76713 New Avatars

Posted by Maverick Master on 18 March 2006 - 07:03 AM in Off Topic

First you should get pics up, second i agree with halo, third I know 50 Cent has a few good songs but quiet honestley i hope he gets shot again in the face and he dies. Also everyone hated his movie and now everyone hates his game so no 50 Cent and why the sims?

#76684 Vortex Rings Questions

Posted by Maverick Master on 17 March 2006 - 09:30 PM in General Nerf

First I think he is right and second don't be a stupid ass just try to fit one in and if it dosn't fit then it dosn't but if it dose then your in luck.

#76668 New Avatars

Posted by Maverick Master on 17 March 2006 - 07:40 PM in Off Topic

I'm not sure how but I'll try.

#76654 New Avatars

Posted by Maverick Master on 17 March 2006 - 06:47 PM in Off Topic

I just wanted to aks Cxwq if you could put these avatars from Gohst Recon 3 and/or Splinter Cell Choas Theory.
Here are some ideas,

First Gohst Recon,
Posted Image

Now Splinter Cell,
Posted Image

Those are just some ideas and please put these on there. Please.

#76550 Avatars

Posted by Maverick Master on 16 March 2006 - 07:17 PM in Site Feedback

Well i know this is old but i will post here any way and i did post another topic before but could you make Gohst Recon 3 Advaced Warfare and/or Splintercell 3 Chaos Therory. Here are some pics,

First Gohst Recon
Posted Image

Now Splinter Cell,
Posted Image

Those are just some ideas and if you could please get these up i would be most gratefull. Thanks!

#76147 Painted Maverick

Posted by Maverick Master on 14 March 2006 - 05:23 PM in Modifications

That looks great, nice clean job, but in thoes pics I see dark blue not black and a grayish color not green. Maybe I'm just goin blind though.

#76107 Kiss Mini Mk. 2

Posted by Maverick Master on 14 March 2006 - 07:04 AM in Homemades

That is really awsome and with not that much of a drop is range is amazing. Also can you load paper darts into the clip?

#76046 Homemade Plunger

Posted by Maverick Master on 13 March 2006 - 03:57 PM in Homemades

I'm making the plunger for my GFFAR and I fitted a 1/2" pvc end cap over a 1/2" cpvc encap so i could cpvc for the shaft and the 1/2" pvc end cap dosn't fit in 1" pvc. So I was wondering how you made it fit.

#75958 Program To Design

Posted by Maverick Master on 12 March 2006 - 07:39 PM in Homemades

Here look at this thread.

#75766 Simplified Far?

Posted by Maverick Master on 10 March 2006 - 05:31 PM in Homemades

I'm not sure if this has been asked yet but i was wondering what you used for a trigger.

#75722 New York Nerf War

Posted by Maverick Master on 10 March 2006 - 07:05 AM in Nerf Wars

Well first of all where are we having it. Second i'm in the proccess of making a GFFAR (Gravity Feed Fast Action Rifle). I think the 24th should be good.

#75539 My First Darw Up

Posted by Maverick Master on 08 March 2006 - 06:58 AM in Homemades

Yes I have started a little with getting pices cut and all, but with school it's a little bit hard to find time. Now I will have more time though because swimming is done. Also thank you for all of your help.

#75507 My First Darw Up

Posted by Maverick Master on 07 March 2006 - 08:00 PM in Homemades

The parts to the gun(for the most part)
Barrel- PETG housed by 1/2" PVC
Bolt- 1/2" with the end covered by 1" PVC
Plunger- 1" PVC and the shaft will be a pice of 1/2" PVC with a end cap on it With a strong spring(any ideas on how many lbs. spring i should use)
Thats really all I have in mind right now.

#75504 My First Darw Up

Posted by Maverick Master on 07 March 2006 - 06:47 PM in Homemades

Sorry but i've never heard of a closepin trigger. I will try searching to find something. I couldn't find anything on th closepin trigger but this is my idea for a trigger, Fist there will be a pice of pvc glued to the end cap so the pin dosn't get stuck in the spring the accual trigger part that you squeeze will be connected to a rectangualar pice of wood or plastic the will have a screw on the right side to pivit on. Then on the bottom right side of the rectangle there will be a compressed spring that will return the trigger to its position after the gun is cocked. On the top of this box there will be a pin or nail the will catch the end of the end cap and the pull spring will be strong enough to hold the pressure then when i squeeze the trigger( which I know will be hard because of the spring) the pin will go down allowing the end cap to fly down the 1/2" PVC to shoot the dart.

#75473 My First Darw Up

Posted by Maverick Master on 07 March 2006 - 11:00 AM in Homemades

I think my trigger system will work but i still need help with more ideas. I also have another idea of a string tied to the pin that can only go right then when you pull the trigger the string will pull the pin down. There would also have to be one pully.

#75467 All The Abreviations

Posted by Maverick Master on 07 March 2006 - 07:06 AM in General Nerf

Ok since you all think someone should post them all I will. Also that was on NerfHQ and there are more members on Nerf Haven. So,
- # -

2x X-Bow (or) 2Xbow - Double Crossbow
2S (or) 2xshot - Double shot
3B - Big Bad Bow

- A -

A-Storm - ArrowStorm
A-Strike - Arrow Strike
ABA- Atom Blaster Atomizer
ABC- Atom Blaster Cyclotron
ABR- Atom blaster Reactor
AT1K - AirTech 1000
AT2K - AirTech 2000
AT3K - AirTech 3000
AT4K - AirTech 4000
ATBB- AirTech ball blaster

- B -

BB- Lanard Blast Bazooka
BBB - Big Bad Bow
BF - BlastFire
BG - blowgun (home made)
BnA - Bow 'n' Arrow
BS - Big Salvo

- C -

CmLII (or) CLII - CommLink II
C-Bow (or) CB - CrossBow
CF: Crossfire

- D -

DTB - Dart Tag blatser
DTCF: Crossfire
DS - Double Shot
DT3 - Defender T3

- E -

EE - (Usauly) Eagle Eye
EE - ( Also ) Electric Eel
E-A-B (or) EaB - Expand-A-Blast

- F -

FB - FastBlast
FF - FastFire (Not Nerf Brand)
FF - Fire Fly
Fs - FireStorm (Not Nerf Brand)
FS - First Shot

- G -

- H -

HB - Hydro Bazooka
HS - Hidden Shot
HT - Hornet

- I -

- J -

- K -

- L -

LB - Lightnin' Blitz
LBB- Lanard Blast Bazooka
LF - Laser Fang
LnL - Lock 'n Load
LS2 - Light Storm 2
LT - Laser Tek

- M -

M6 - Mech 6
M3 - Mech 3
MB - Master Blaster
MBB - Mech Ball Blaster
MBZ (or) MP150 - Motorized BallZooka | MP150
MS (or) M-Storm - MissileStorm
MS - Max Shot

- N -

NF - NiteFinder
NB1 - NB-1 Missile Blaster

- O -

- P -

PC - PowerClip | DX1000
PS - PowerStrike (Not Nerf Brand)

- R -

RB- Ratchetblast
RF20
RFR - Rapid Fire Rifle
RT(T) - Rototrack
RZB- Razorbeast
RZF- Razorfin

- S -

SS - Secret Shot
Ss - Sharpshooter
SS2 - Secret Shot II
SSII - Sharpshooter II
SF - SplitFire
Sm250 - SuperMaxx 250
Sm350 - SuperMaxx 350
Sm750 - SuperMaxx 750
Sm1500 - SuperMaxx 1500
Sm3000Y - SuperMaxx 3000 (Yellow)
Sm3000G - SuperMaxx 3000 (Green)
Sm3000B - SuperMaxx 3000 (Blue)
Sm5000 - SuperMaxx 5000
SmDs - SuperMaxx DiscShooter
SSM - Switch Shots Max
SSPB - Secret Strike Pocket Blaster
SSU - Switch Shots Ultra
SSS - Switch Shots Super
St - Sawtooth
ST - Single Tek
STS - Secret Target Strike

- T -

T4 - Tek 4
T6 - Tek 6
T10 - Tek 10
TX2 - Vortex Tornado X/2
TS - Triple Strike
TT - TripleTorch
TTEK - Transforming Tek
TTS - TechTarget Set (Usauly refering to the gun included with the set)
TTG - TechTarget Gun (The gun included in the TechTarget set)
TTG2: The Scout clone that comes with the new Tech Target.

- U -

- V -

- W -

WF - WildFire
WCLP-Weird Cheap Little Pistol

- X -

X-Bow - CrossBow

- Y -

- Z -

- - - Other - - -

FBR - Foam Baker Rod
FPS - Feet per Second
ROF - Rate Of Fire
RPM - Rounds per minute
PSI - Pounds per Square Inch
PVC - Polyvinyl Chloride, Usually referring to PVC piping

#75431 All The Abreviations

Posted by Maverick Master on 06 March 2006 - 09:00 PM in General Nerf

I thaught it would be a good idea after searching and finding nothing to make a page of all the abreviations of names for the many newcomers NH(Nerf Haven) gets. To start i will do just one that frequently comes up that is BBB, Big Bad Bow. Also NF, Night Finder. Finnaly don't post all of them in just one post.

#75429 My First Darw Up

Posted by Maverick Master on 06 March 2006 - 08:39 PM in Homemades

Sorry for the double post but i ran out of room so here are the pics without lables,
First the trigger
Posted Image

Next the bolt,
Posted Image

and last the overall design without lables,
Posted Image

Note: I take no credit for this it is just basicly a FAR with a gravity clip. So i will call it my GFFAR(Gravity Feed Fast Action Rifle).

#75271 My First Darw Up

Posted by Maverick Master on 05 March 2006 - 04:59 PM in Homemades

1.)Are you using shells or not?

2.)What is your mechinism for getting the left-right motion of the trigger into the up-down motion of the pin?

3.)Are you going with an integrated bolt/plunger system like the FAR? Or a separate system like my still-unnamed gun uses?

~ompa

1. I'm not using shells

2.It pivites on a screw(if thats what you mean)Also it will have a pull spring on the right side.

3.The bolt will load the dart and cock the gun

Now heres my new design. First labled pics,
Overall design
Posted Image

Trigger system
Posted Image

Next the bolt,
Posted Image

Finnaly the overall insides
Posted Image

#75259 Modification and Paintjob Pictures

Posted by Maverick Master on 05 March 2006 - 03:33 PM in Modifications

That Halo 2 s,niper rifle is super cool. Also is your halo shot gun just an idea or have you made it? If you have do you have aany pics of it because it sounds really cool if you have or if you do.

#75257 My First Darw Up

Posted by Maverick Master on 05 March 2006 - 03:28 PM in Homemades

Yes for the most part i am so i take no credit for it but i just posted it for help.

#75255 My First Darw Up

Posted by Maverick Master on 05 March 2006 - 03:08 PM in Homemades

Ok when you pull back the bolt it pulls back the plunger end cap with the o-rings and it gets caught on the pin. Also the dart drops down, then when you pull the trigger it turns on a screw and the pin goes down and the end cap gets sprung forward and the air gets shot down the barrel and the flies out of the barrel.

#75252 My First Darw Up

Posted by Maverick Master on 05 March 2006 - 02:52 PM in Homemades

this is my first attemptat a homemade
Posted Image

I know this has many flaws but i'm not done yet.It is clip feed through a bolt.Also it is spring. Help would be greatly appreciated.

#75237 My First Draw Up Of A Homemade

Posted by Maverick Master on 05 March 2006 - 12:24 PM in Off Topic

This is my first attempt at a design
Posted Image

I know there are many flaws with it but i'm not done yet.
It is bolt action with a clip but no shells. Barrel will be cpvc. Also any help would be very appreciated.
Can any body tell me how to make the pic bigger.

#75170 Design Programs

Posted by Maverick Master on 04 March 2006 - 07:07 PM in Off Topic

I fell stupid asking this question but i was wondering how you guys make those cool homemade desings. I searched but found nothing that helped. Is it a special program or something?(I have all of the microsoft office things and everything)

#75152 New York Nerf War

Posted by Maverick Master on 04 March 2006 - 04:09 PM in Nerf Wars

For my clan we have

2. NFs
I have a modded supersoaker
Buzz Bee double shot
An actual cross bow(not nerf brand)
AT3K
I'm also going to get the Long shot and mag strike.

Also can we have it a little farther north maybe.(I can't drive and it is pretty far from Syracuse).

#75082 Anyone Heard Of This Member

Posted by Maverick Master on 03 March 2006 - 10:04 PM in Off Topic

I'm not trying to pick a fight and all but he asked a stupid question so let the admins take care of it and his question got answered now stop posting here since it was such a stupid and pointless thread.

By content type

See this member's

Sign In