I re-painted hendrix
Yeah, it was a cool design that I thought of when I was on a crazy trip yo.
This was when I was sober, but it's still awesome-sauce.
I'm out.
jakejagan's Content
There have been 153 items by jakejagan (Search limited from 11-May 97)
#303085 Modification and Paintjob Pictures
Posted by
on 09 August 2011 - 02:15 AM
in
Modifications
Hey guys, I decided to stop smoking so much and actually mod even though I don't go to any wars and I get sick right before the biggest wars in California.
I re-painted hendrix
Yeah, it was a cool design that I thought of when I was on a crazy trip yo.
This was when I was sober, but it's still awesome-sauce.
I'm out.
I re-painted hendrix
Yeah, it was a cool design that I thought of when I was on a crazy trip yo.
This was when I was sober, but it's still awesome-sauce.
I'm out.
#300699 Modification and Paintjob Pictures
Posted by
on 28 June 2011 - 06:23 PM
in
Modifications
2008 meets 2011:
Oooooooh, what's inside?
A 3k tank fits perfectly with just a little bit of trimming
Key ring connector material: Headphones wat?
Stickers are nice too
Oooooooh, what's inside?
A 3k tank fits perfectly with just a little bit of trimming
Key ring connector material: Headphones wat?
Stickers are nice too
#294456 Modification and Paintjob Pictures
Posted by
on 13 February 2011 - 07:04 PM
in
Modifications
#281395 Mano 2.5 Footage
Posted by
on 27 July 2010 - 04:14 PM
in
General Nerf
Great footage in my opinion. For once the camera wasn't looking at the ground the whole time. The war seemed like a great time.
Quick question Zorn, how useful would you say your hopper setup was with the reservoir.
Quick question Zorn, how useful would you say your hopper setup was with the reservoir.
#275762 Ls Internal Help
Posted by
on 23 May 2010 - 10:40 PM
in
General Nerf
Generally those screws aren't completely vital because the plastic behind it holds it together. You could use E-putty, which I have done, or reinforce it with metal washers.
#278487 Longshot Breech Questions
Posted by
on 24 June 2010 - 06:11 PM
in
Modifications
9/16 is the piece that is 19/32, the barrel is 17/32 and the pusher is 15/32. That is the write-up down sized by one sixe. You could have the pusher be 1/2 in, but there would be more friction.
#280059 Lanard Shotgun Problem
Posted by
on 12 July 2010 - 03:48 PM
in
Modifications
Did you do BW's torsion spring relocation?
#277983 Lanard Shotgun Cpvc Couplered
Posted by
on 17 June 2010 - 11:58 PM
in
Modifications
I fail when it comes to precision, so this mod makes it a load easier. Great Job!!!
#296036 Japanese Earthquake/tsunami
Posted by
on 14 March 2011 - 10:43 PM
in
Off Topic
#273971 Improving Accuracy Of Guns
Posted by
on 03 May 2010 - 06:34 PM
in
Modifications
Yes, use stefans because they are many times more accurate and are actually cheaper than buying darts from the store.
#282092 Hybrid Hopper, Combines Hopper With Brisc
Posted by
on 04 August 2010 - 12:53 PM
in
Darts and Barrels
Wow, that is awesome, I need to make one
#282025 Hybrid Hopper, Combines Hopper With Brisc
Posted by
on 03 August 2010 - 09:32 PM
in
Darts and Barrels
I love the streamlined design of the new clip. Would you be able to compare the ranges of a hopper to "THE CHOPPER"?
#289650 How To[mostly] Build An Svt4b
Posted by
on 01 December 2010 - 06:43 PM
in
Modifications
Well, if you are using slugs darts, they generally max out at a certain range (about 120 in my range tests).
I own one of these bad boys and It takes about 1-2 pumps LESS than a normal 4b while the pump is in the front.
I own one of these bad boys and It takes about 1-2 pumps LESS than a normal 4b while the pump is in the front.
#294866 How To Add Mega To A Mega Missile.
Posted by
on 21 February 2011 - 08:52 PM
in
Modifications
Pretty slick. Me likey.
How have ranges been compared to your Big Blast modification?
How have ranges been compared to your Big Blast modification?
#281525 Homemades Picture Thread
Posted by
on 28 July 2010 - 07:54 PM
in
Homemades
Rogues Hopper:
Close-up on the barrel:
If you cant see, the petg was reamed out with pliers to help dart entry and the pvc was sanded to fit the petg flush.
On top is a 3/4 in ball-valve for easy loading. The colored e-tape is easily removable, but allows for a better grip.
Now for something of mine-ish:
Snap mk5 made by Darth Freyr with a pistol splat attached on the bottom via zipties. The splat acts as a fore-grip and as a second shot. The splat has a cpvc coupler and hits about 65 feet which is plenty for a back-up shot.
More pics of the snap:
Close-up on the barrel:
If you cant see, the petg was reamed out with pliers to help dart entry and the pvc was sanded to fit the petg flush.
On top is a 3/4 in ball-valve for easy loading. The colored e-tape is easily removable, but allows for a better grip.
Now for something of mine-ish:
Snap mk5 made by Darth Freyr with a pistol splat attached on the bottom via zipties. The splat acts as a fore-grip and as a second shot. The splat has a cpvc coupler and hits about 65 feet which is plenty for a back-up shot.
More pics of the snap:
#281375 Homemades Picture Thread
Posted by
on 27 July 2010 - 12:37 PM
in
Homemades
Well I just got this today and I used it all day at BAFF.
Yup, thats a McNumbers +bow. Uber quality and the grip was supa soft, I had no soreness in my hand. It also came with a foregrip and padding on the stock and grip. Another picture:
The attachments I use are a hopper clip that holds 9 darts or 16 in of polyester.
Ranges=awesome.
Thanks Ryan.
More pictures later
Yup, thats a McNumbers +bow. Uber quality and the grip was supa soft, I had no soreness in my hand. It also came with a foregrip and padding on the stock and grip. Another picture:
The attachments I use are a hopper clip that holds 9 darts or 16 in of polyester.
Ranges=awesome.
Thanks Ryan.
More pictures later
#290713 Homemades Picture Thread
Posted by
on 12 December 2010 - 03:13 PM
in
Homemades
What happens when you have a bunch of old t-shirts that you don't wear anymore?
I turn them into dart pouches of course!
Might be selling these soon. PM with any any questions etc.
I turn them into dart pouches of course!
Might be selling these soon. PM with any any questions etc.
#280623 Homemades Picture Thread
Posted by
on 18 July 2010 - 08:00 PM
in
Homemades
Thanks Zorn
Sorry for huge pics.
#276426 Homemade Arrows
Posted by
on 30 May 2010 - 01:36 PM
in
Darts and Barrels
I agree with Fome, so screw the formulas. Guess and check is the simplest method. I am glad that a good substitute has been created.
Fome, how many wraps of E-tape did you use for the foam? Did you do it in more than one area?
Fome, how many wraps of E-tape did you use for the foam? Did you do it in more than one area?
#276431 Homemade Arrows
Posted by
on 30 May 2010 - 03:03 PM
in
Darts and Barrels
I'm referring to ONLY using math to get your answer. Now a combination of the two would would provide good results in my opinion.
Fome: Never mind about the E-tape thing.
Fome: Never mind about the E-tape thing.
#277670 Hippo's Zombpocalypse
Posted by
on 13 June 2010 - 11:07 PM
in
Nerf Wars
Got a ride, I'm in.
#277126 Hippo's Zombpocalypse
Posted by
on 08 June 2010 - 12:49 AM
in
Nerf Wars
Sorry Hippo, can't make it, BAFF 9 and BAFF 9B are the wars I can go to this month
#294850 Happy 17th!
Posted by
on 21 February 2011 - 07:08 PM
in
Off Topic
Who's Jake?
A fat hobbit.
You know it son.
#274566 Foamtalk: A Nerf Podcast
Posted by
on 11 May 2010 - 08:17 PM
in
General Nerf
I would like to be part of it. I am 16, but I have a squeaky voice. I am active in the monthly BAFF wars and attend mod parties.
#292410 Foamtalk: A Nerf Podcast
Posted by
on 08 January 2011 - 12:21 AM
in
General Nerf
I would like to be in a podcast.
#270143 Extreme Nite Finder Modification
Posted by
on 23 March 2010 - 09:56 PM
in
Modifications
I think I just shat my pants after I saw the finished product. This is a fantastic modification Banshee. May you get lots of money for this gun on ebay.
#278695 Dt3 Mod For N00bz
Posted by
on 27 June 2010 - 01:47 AM
in
Modifications
Nice write-up. It would be nice to know actual ranges, but smacking the wall at 35 ft sounds pretty good.
#275947 Diy: Hopper Clips
Posted by
on 25 May 2010 - 05:41 PM
in
Darts and Barrels
Would Slug darts work with this setup?
#274496 Deploy At2k Integration**modular Baby!**
Posted by
on 10 May 2010 - 11:07 PM
in
Modifications
OK, I know this sounds noobish, what are general ranges for a singled 2k? I have looked far and wide and I've found numerical ranges.
By the way, this is an excellent mod, makes me want to get a deploy.
By the way, this is an excellent mod, makes me want to get a deploy.
#307002 CS-70 Marauder
Posted by
on 05 November 2011 - 06:42 PM
in
Modifications
I have a Dremel and loathe using it. It may be a matter of practice, but I think Kit's right - without a steady hand, it's just asking for trouble.
That's why you slow the speed down and take your time removing the plastic.
#292316 Cpvc Couplered Nf
Posted by
on 06 January 2011 - 12:20 AM
in
Modifications
Wow, really? How have I not seen this way before? I was cpvc couplering nfs with a full CPVC coupler like in my extended draw nf write-up before jakejagan had the idea to use CPVC end caps with holes drilled into them, but they didn't hold well since they weren't flat so I tried cutting the couplers in half.
I got the idea from Popatachi, who posted in the Mod/PJ thread a while back, so credit goes to him for POSTING it, although it wasn't on a nite-finder, but a splat. You do however have to sand a little bit of the bottom lip of the end so that the gun can close, but then again you can just sand the endcap slightly to fit
Another good thing is to do this:
Tantum did cut a washer to fit, but the washer piece that is on the bottom (where the battery covers screws on) fits perfectly in that space. It gives those areas reinforcement so they wont crack which has happened--to me atleast--before. This was before jb-weld was added bw . The 1st gen also has the fin on the top to stop the Plunger tube from moving around as well.
I add to Blue's comment that no catch reinforcement is needed. I have a everbuilt with a good amount of pre-compression (and before a [k26]) and I was able to throw the blaster on the ground while primed and nothing would go off.
#282088 Community Snap Thread
Posted by
on 04 August 2010 - 12:11 PM
in
Homemades
Beaver, an idea that was used with my snap was to put an o-ring on the end of the cpvc tee handle. It should a little bit fatter than the normal o-ring. I'll get a picture of it today. It will help protect the tee from smashing into the rear bushing
I love snaps as well and this thread is a great idea because even though there are great write-ups, somethings aren't explained (which is totally fine, people should be able to solves the problem) well.
I love snaps as well and this thread is a great idea because even though there are great write-ups, somethings aren't explained (which is totally fine, people should be able to solves the problem) well.
#288078 Community Snap Thread
Posted by
on 07 November 2010 - 11:58 AM
in
Homemades
What is the advantage of wood plunger rods? Is it the mass, feel?
#267202 Cobra Vs Titan
Posted by
on 27 February 2010 - 11:46 AM
in
Modifications
If you are interested in the tank, the cobra tank is about 3x bigger than a titan tank and is more durable because it is meant for higher pressure. Higher pressure=higher range. If you wanted to use it in a war, you would have to shotgun barrel both of them regardless.
#276372 Chicago Epicnerf 2
Posted by
on 29 May 2010 - 08:45 PM
in
Nerf Wars
I apologize if this may seem inappropriate, but a member on youtube (NOT ME) has said that they will be a definite at this war. I post here because he has been validated.
#292984 Caffeine Is Alive
Posted by
on 16 January 2011 - 11:34 PM
in
General Nerf
I attest to what Venom says, as I was there in nerfchat with him while it happened.
Its cool to see another nerfer from the lost realm
Its cool to see another nerfer from the lost realm
#265608 Bbbb Barrel Material
Posted by
on 16 February 2010 - 11:47 AM
in
General Nerf
since your darts fit tight in cpvc, they should be a good airgun fit in PETG.
#253248 Bay Area Nerf War
Posted by
on 11 October 2009 - 11:10 AM
in
Nerf Wars
Alright, from the recent failure of a Bay Area war in CA, not Florida, I thought I should make a topic. I am located on the Peninsula, near San Mateo. I don't know any good locations for a war, as I've never been to one, just short fights with my friends. There aren't any age restrictions, I am 15. Uh, yea.. hopefully we can get something going.
i live near san mateo too, we should organize a war
#253247 Bay Area Nerf Off
Posted by
on 11 October 2009 - 11:09 AM
in
Nerf Wars
Heifty and I both live in Castro Valley, so we will most likely have it there. There are a few different schools around here that would make excellent Nerf battlefields.
i love in redwood city which is about 90 mins away from where you guys are... when is there gonna be a war cuz i havent heard of any bay area nerfers
#253245 Bay Area Nerf Off
Posted by
on 11 October 2009 - 11:07 AM
in
Nerf Wars
Hi everyone, Im wondering if I should organize a Bay Area Nerf Off (or BANO). Please reply if you live in northern california and want to have a nerf war.
i live 20 miles from san franscisco, when will there be a war?
