- NerfHaven
- → Eightdotno's Content
Eightdotno's Content
There have been 82 items by Eightdotno (Search limited from 11-May 97)
#359583 Brass breech apollo?
Posted by Eightdotno on 29 April 2017 - 11:39 PM in Modifications
#361942 Dual strike rumors
Posted by Eightdotno on 11 November 2017 - 06:57 PM in Modifications
Smart ar 2 https://imgur.com/gallery/Mi0zs
Smart ar 1 https://imgur.com/gallery/Ems82
My apologies it was supposed to be messenger not sweet revenge.
#359339 What was the first known homemade?
Posted by Eightdotno on 20 April 2017 - 11:42 AM in Homemades
#361332 Vulcan Not Firing All Darts
Posted by Eightdotno on 18 August 2017 - 12:30 PM in Modifications
There are 3 notable problems you may be experiencing,So the other day I descided to mod my Vulcan. I bypassed the electrical locks and replaced everything with 16 gauge wire and put in a 3S lithium battery tray running on three EBLs and I also put in a micro switch behind the trigger. I then opened up the gearbox taking out the air restrictor and Keeping the stock spring and threading on a old maverick spring Ito the stock one. Also I glued the clutch together and I put silicone grease around the seal that goes over the belt. then when I went to fire it only 10 darts came out of the whole 25 dart belt. Does any one know what the problem may be?
1. Youe vulcan may be pushing out as much air as it needs to fire your darts, putting a maverick spring around the stock spring may be the problem, it could be that it's not letting your vulcan not get sufficient compression, try taking out the maverick spring and see if that works.
2. Youe darts are too loose, the problem may not be with the vulcan, but your with your darts, what kind of darts are you using?
3. Your belt may not be getting a good enough seal around the plunger tube, you can test this by firing your vulcan, and looking at the belt feed while it's firing, if the plunger tube does not seal up with the end of the belt, that's the problem.
#361357 DIY Combo Mod: Jolt+Stealth Grip = RPG attachment
Posted by Eightdotno on 20 August 2017 - 09:40 PM in Modifications
Do this for a big shock and you have the best attachment I can own.Ahoi
My Recon Mk II looked a bit empty in the front, so I came up with this, and made a tutorial for it.
Homemade Grenade Launcher attachment for your nerf blasters. Let me know what you think:
https://youtu.be/oWnRVDde5Mk
#361333 Titan rifle.
Posted by Eightdotno on 18 August 2017 - 12:43 PM in Modifications
So here's the video i did on it.
#361472 Anyone Play MLB: The Show on the PS Vita?
Posted by Eightdotno on 01 September 2017 - 12:31 PM in Off Topic
I just have 1 question, why did you ask this on nerg hayven? Sony or the maker of the game could help serverly, or you could look up the problem on google or youtube, but nerf hayven is probably not the place to start looking for answers.If the title applies to you, have you ever experienced freezing issues on load screens or error messages while watching replays of a particular play, such as a home run? I'm playing the 2014 version of the game, but I'm asking if anyone has this problem in any version, given how rare this console is.
Anyone have freezing issues in general on their Vita and if so, how did you fix it?
Thanks!
#359663 Air Tank for Alphahawk?
Posted by Eightdotno on 03 May 2017 - 11:26 AM in Modifications
But there are many other tanks that work extremely well.1st gen panther tanks will make youe blaster hit 90 fps If modded right, but they are hard to find. So I would recommend a blastzooka tank.
#358693 Roughcut gear removal?
Posted by Eightdotno on 22 March 2017 - 11:29 AM in Modifications
It's hard to explain but if anyone who has opened a roughcut (like me) then maybe you know what I'm talking about.
#359437 I recently got a supersoaker dartfire, any suggestions for this thing?
Posted by Eightdotno on 25 April 2017 - 11:27 AM in Modifications
#358712 Roughcut gear removal?
Posted by Eightdotno on 22 March 2017 - 08:30 PM in Modifications
#361432 Stampede Repairs
Posted by Eightdotno on 29 August 2017 - 12:39 PM in General Nerf
Ebay may have old stampedes in disrepair, or you could get one of those metal gear kits for the stampede if you can find them, which haven't been sold in forever to my knowledge. If you have access to a 3d printer, you can print stampede gears.Thanks for that, one of the gears is a bit worn, any place I might get replacements?
#358914 Roughcut gear removal?
Posted by Eightdotno on 30 March 2017 - 11:46 AM in Modifications
#361350 Titan rifle.
Posted by Eightdotno on 20 August 2017 - 04:36 PM in Modifications
#359337 What barrel to use?
Posted by Eightdotno on 20 April 2017 - 11:30 AM in Darts and Barrels
#360735 Quick catch mechanism question
Posted by Eightdotno on 23 June 2017 - 11:02 AM in Modifications
#359956 Alternative options for Stryfe?
Posted by Eightdotno on 16 May 2017 - 11:26 AM in General Nerf
#361429 Nerf martini henry.
Posted by Eightdotno on 29 August 2017 - 12:27 PM in Modifications
I originally wanted to use a sentinel, but the problem is that the boomco darts would spiral out of control due to the size of the plunger tube, if I wanted to use that i would have to keep in the stock spring, which would mean less power.also I would have to pay $40 on ebay because no store in my town sells sentinels(trust me, I've looked), so since I aleredy have a lemon slingfire I found at a goodwill for $3, I would like to use that.Sounds like a converted sentinel.
#359804 Is This A Home.M Or A Mod?
Posted by Eightdotno on 10 May 2017 - 11:27 AM in Modifications
IF it starred out as homemade inernals that needed a body, then it's a mod,
it's ONLY a homemade if any part of the strongarm isnt used mechanically.
#361424 Nerf martini henry.
Posted by Eightdotno on 29 August 2017 - 12:51 AM in Modifications
Any suggestions on where to start? Or has anyone else done this?
#361430 PSA Nerf Rayvenfire is out
Posted by Eightdotno on 29 August 2017 - 12:32 PM in General Nerf
I can't even get the rayvenfire, If I had known this 3 days ago, I would have raced down to the kohl's in my town, which had a going out of business sale that started on friday, and now we have no kohl'sIt's even worse here in the US. They are $70 because KOHL's
#360066 star wars kyn erso blaster imr upgrade?
Posted by Eightdotno on 23 May 2017 - 11:31 AM in Modifications
#361444 Nerf martini henry.
Posted by Eightdotno on 30 August 2017 - 12:43 PM in Modifications
Okay, but what about a sealed breech?
Drill out the stock breech and insert a section of Xploders barrel into it. Cut a large loading slot and remove the dart tooth and fine-tune.
I primary just now need to know what kind of pvc let's exploderz barrels fit in it and I'm golden to start making s true nerf martini henry.
#361443 PSA Nerf Rayvenfire is out
Posted by Eightdotno on 30 August 2017 - 12:37 PM in General Nerf
The kohl's nearby here tends to have sales on stuff and we get coupons that are 30% off...waiting for that moment when its 30% off and I have a coupon. It makes the rayvenfire around $35 USD.
Lucky, now the only place where I can find semi auto flywheel blasters for a decent price are at goodwills, and I'm not paying $27 for a brand new stryfe.
#360065 Recon CS-6 $ Value ?
Posted by Eightdotno on 23 May 2017 - 11:27 AM in General Nerf
#360629 2017 Contest Entries
Posted by Eightdotno on 17 June 2017 - 09:15 PM in General Nerf
#359438 Highest Capacity Nerf Gun - 5000 Rounds! Slightly Impractical :P
Posted by Eightdotno on 25 April 2017 - 11:31 AM in Off Topic
I thought the gun was in the box and you where gonna take it out until I saw you pick it up.
#358694 What to do with my longstrike?
Posted by Eightdotno on 22 March 2017 - 11:40 AM in Modifications
I'm sure if you look up longstrike mods on youtube you might find something else you'd like.
#359775 Rocket Racoon's blasters in vol. 2
Posted by Eightdotno on 09 May 2017 - 11:30 AM in Off Topic
#359957 Springers that can use hoppers
Posted by Eightdotno on 16 May 2017 - 11:41 AM in Darts and Barrels
#359918 Springers that can use hoppers
Posted by Eightdotno on 15 May 2017 - 11:33 AM in Darts and Barrels
sledge fire, dual strike, expand a blast, ERTL PAS, air zone quadshot, big bad bow, the origional longshot (if your confused about this look it up, putting a hopper on a longshot is a thing),and most the origional nerf 1995 crossbow.
#359805 Rocket Racoon's blasters in vol. 2
Posted by Eightdotno on 10 May 2017 - 11:36 AM in Off Topic
He also said that the first pistol is just a heavily painted nitefinder with 2 maverick pluger tunes on the front of it,
And the 2nd picture is either a retaliator or a recon with the magazine part of it sawed off and some pvc pipe put in its place.
#360206 Broken Rough cut
Posted by Eightdotno on 30 May 2017 - 11:23 AM in General Nerf
#361322 Sleeper Breech Question
Posted by Eightdotno on 17 August 2017 - 12:24 PM in Darts and Barrels
From most of the sleeper breechs I've seen, you have to drill out the dart post and ar for the breech to function smoothly, if you left the dart post and ar in it, you may encounter some jamming.Would putting a sleeper breech in a blaster with the ar's intact still improve range? I would like to put one in my EAT a 5 kg to get a bit more range.
#359061 My strongarms cylinder pop out won't work.
Posted by Eightdotno on 06 April 2017 - 11:28 AM in Modifications
#358676 Nerf Stryfe discontinued???
Posted by Eightdotno on 21 March 2017 - 11:27 AM in General Nerf
I just checked the Nerf Wikia and it lists the stryfe as discontinued.
#358658 Nerf Stryfe discontinued???
Posted by Eightdotno on 20 March 2017 - 11:30 AM in General Nerf
#359018 My strongarms cylinder pop out won't work.
Posted by Eightdotno on 04 April 2017 - 11:26 AM in Modifications
#358994 My strongarms cylinder pop out won't work.
Posted by Eightdotno on 03 April 2017 - 11:19 AM in Modifications
Does anyone know how to make this work, all I did is remove the dart pegs to make it compatible with stefans. It does pop out a tiny bit I'm guessing it's the air restrictor but idk I would prefer not to have to remove them. Here is the picture and yes I know that it does not have the barrel thingy. Thank you for whoever can help!
It is the air restrictor, if your going to remove the dart pegs in a revolver, you have to remove the air restrictor. It could also be a broken pop out mechanism, but it's probably the air restrictor.
#360208 The Friday Night Trooper Blues
Posted by Eightdotno on 30 May 2017 - 11:36 AM in Modifications
- NerfHaven
- → Eightdotno's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·