- NerfHaven
- → windtex1's Content
windtex1's Content
There have been 18 items by windtex1 (Search limited from 13-May 97)
#305525 CPVC Breach (Sodizzle) Longshot
Posted by windtex1 on 08 October 2011 - 01:21 PM in Modifications
#303199 Shortened pumpsnap
Posted by windtex1 on 11 August 2011 - 08:08 AM in Homemades
#294588 Barrel Material For Stock Micros
Posted by windtex1 on 16 February 2011 - 06:55 PM in Modifications
I hope this helps !
#292561 Lanard Triple Shot Re-barreled
Posted by windtex1 on 10 January 2011 - 05:05 PM in Modifications
EDIT: You changed the title, I didn't realize...but I still have somewhat of a point.
#292429 Easy Spring Finds
Posted by windtex1 on 08 January 2011 - 04:13 PM in Modifications
Sure pens and toilet paper springs are fine but if you want a precise spring , go to a hardware store. Pen and toilet paper springs should be a last resort. However, you can do whatever you want...i just thought it would be easy im sorry jeez... the toilet paper thing was just random but the pen thing is just an easy thing that ive done with random pens around my house, which makes it free...
#292407 Easy Spring Finds
Posted by windtex1 on 07 January 2011 - 09:47 PM in Modifications
#292406 My Spring Chamber Modification
Posted by windtex1 on 07 January 2011 - 07:52 PM in Modifications
#291067 Bungee Blasters And Secret Santa!
Posted by windtex1 on 17 December 2010 - 06:51 PM in Modifications
Just some ideas.
#290541 R Series Blasters - Overview!
Posted by windtex1 on 09 December 2010 - 09:10 PM in Homemades
A k45 theoretically doesn't even fit over 1/2 cpvc let alone pvc.the ID is 0.952.
The spec sheet at Mcmaster suggest that they fit.
What the hell are you guys talking about? The ID is not specified, but the OD is .968 and the wire thickness is .08. .968-.16=.808
This is correct. I bought a k-45, and then didn't even fit.
#287391 The Clothespin Trigger Mk2
Posted by windtex1 on 23 October 2010 - 02:56 PM in Homemades
Thank You and this is really a big step.
#286079 Ultimate Raider
Posted by windtex1 on 26 September 2010 - 10:58 AM in Modifications
If you put a drum in the longshot you would be getting 35 shots at 100 feetTrue, because of the reversed plunger but, I prefer 35 shots at 80 feet than 6 shots at 100That will increase the ranges but it will not get longshot ranges.
Plus I doubt that you could even get 80 with just that breech.
First, you can add springs,power stock,lots of different things to achieve 80 ft.
Also, putting a drum in a longshot makes the cost go up by 30$ just for a drum.
#286075 Ultimate Raider
Posted by windtex1 on 26 September 2010 - 09:18 AM in Modifications
True, because of the reversed plunger but, I prefer 35 shots at 80 feet than 6 shots at 100That will increase the ranges but it will not get longshot ranges.
#286073 Ultimate Raider
Posted by windtex1 on 26 September 2010 - 09:04 AM in Modifications
Why does everybody have the Pokemon blanket
Well, I took the pic from the internals dictionary.=)
#286071 Ultimate Raider
Posted by windtex1 on 26 September 2010 - 08:15 AM in Modifications
1. Unscrew your gun:
not my pic:
2. Remove your air restrictors which is fairly basic.
3. You can now build this breech:
4. Now, you can use streamlines or use a stefan modded drum.
Thank You
(I cannot test ranges right now for many, various reasons)
Questions?Comments?
#284295 Need Quadshot Catch
Posted by windtex1 on 29 August 2010 - 09:11 PM in Modifications
#284261 Need Quadshot Catch
Posted by windtex1 on 29 August 2010 - 09:27 AM in Modifications
Long story short, I need to buy a quadshot catch. preferably stock. Name your price. (it has to be reasonable) and i will most likely buy it. please pm price if possible
I am very aware that this is in the wrong section. I do not know how to move it. Sorry, administrators.
Thank You in advance
#277187 Nerf Sneakshot
Posted by windtex1 on 08 June 2010 - 06:09 PM in General Nerf
#270499 Orange Logo Nitefinder
Posted by windtex1 on 27 March 2010 - 05:45 PM in Modifications
Step 1: Open the gun up and take the plunger assembly apart. Then, put the assembly in boiling water for about a minute to soften up the glue. For now, we will do a quick mod to the plunger and make it a lot better. What you want to do is add a spring and another o-ring.
Step 2: Now that we are done with the plunger, we have to separate the plunger assembly. We have to leave the connector from the plunger tube. Do not clean it out completely tough. Just drill a hole in the middle part. A coupler should fit around it nicely so you how glue the epoxy putty it on and lastly, minimize your nite finder shell.
Put it all back together and you are done with an awesome nite finder.
[size=7]I am aware that I have no pictures. I am pretty new to nerfhaven and I did not know how to post them. I was at sgnerf before
- NerfHaven
- → windtex1's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·