This is my TT mod whitch uses a Cpvc coupler/barrel arrangement, which I have not seen on the forums before. So here it is.
Here's a picture of the way I cut down my TT's case, I did this because I thought it's case was pretty big for a pistol. You can do this if you want.
Here's your plunger, you can stretch the spring if you want but I would not recomend it. I suggest replacing the spring or adding bands or a bungee cord.
Here's a picture of the plunger tube, as you can see there's 2 pieces.
Glue the second piece onto the tube like this.
Now onto your barrel arrangement. As I stated above I used a Cpvc coupler/barrel set up. Here's how you glue the coupler.
There it is your done, I added some E-tape for extra support. For a your barrel I'd recomend 4.5-6 inchs, I'm using 5 and I'm getting around 60 feet.
FBBMember Since 19 Jun 2004
Offline Last Active Apr 12 2005 02:18 PM
- Group Members
- Active Posts 31
- Profile Views 1,457
- Member Title Member
- Age Age Unknown
- Birthday Birthday Unknown
04 Dec 2011 - 00:41