hard rockr

Does anyone have this game? And if so, do you know if there is anyway to play multiplayer without going online?

Hey ya'll. I'm just wonderin' if anyone else has made a nerf cannon? Mine exactly isn't a "nerf" cannon, because it shoots a two inch shell. So ya.. this was just a topic starter, but it would be nice to see what people have been experimenting with. I'll get a picture of my cannon up A.S.A.P.

Alright for this you need duct-tape, a 3/4 copper coupler, and 4-inch of CPVC.

Cut off the front of the stock barrel that the SECRET STRIKE has. I was able to cut off about an inch. Now, take a saw, or something, and cut the plastic stuff the pump is held on with. Cut it the same legth as you cut the barrel. Now, take the copper coupler, and slide into the cut you made. Apply hot glue if you like, to add stability. Now wrap the 4 inch CPVC in about 3/4 ft. of duct-tape. Slide it in the copper, and apply hot glue to keep it in. Now the gun should get about 70' angled, maybe 57' flat. (I haven't measured but I think I'm pretty close.) Enjoy!

Okay well i'm not going to say that this is all new material, because some of it may very well not be.

STEP 1:
Okay. For this you need to go to your local Home Depot. Their, you should be able to get industrial springs for about 3$. You should get two in one pack, if not, then mine were a special deal. Okay now you should open your gun all the way, including the plunger parts. If it's possible, get two o-rings onto the plunger head. And instead of using the plastic head, put on a metal washer. Put on one of the industrial springs, and put the plunger together. Getting the plunger together now is kinda hard because of the spring, but it can be done.

STEP 2:
Alright, keep your gun apart, except for the plunger. For this, part, start by drilling out the restrictors, and the peg. Now, cut a 4 inch piece of brass. Make sure your brass is tight enough around a stefen, so that you have to blow it down the barrel. This maximizes the pressure in the gun. Now, hot glue the barrel onto the top of the plunger casing. Wrap it in duct tape, e-tape, or whatever, just to keep it on. No, close up the gun, and make sure the gun can cock. It may be hard tp pull back at first, but you get used to it.

Now, here's the best part.....65-70 ft. (average 67.5) No lie! All flat shots, no angled. I think angled shots are dumb because your not going to be shooting someone with an angled shot.

But ya, that's my mod. Sorry about having no pics, but i think the words helped somewhat.