Jump to content


Sinewav

Member Since 22 Aug 2006
Offline Last Active Mar 09 2009 01:44 PM

Posts I've Made

In Topic: Possible Mav/tt Integration?

05 March 2007 - 10:50 PM

I actually (almost) completed a Nitemav about a month ago. The only issue I had was getting the plunger tube to fit in the Maverick's casing. Then I got impatient , dremeled the crap out of it, and tried to do some sort of makeshift combination of the nitefinder and the maverick body... which of course failed horribly, but looks hilarious.

The tech target tube is actually slightly thinner and a bit longer, so I think it might fit easier than the nitefinder's.

Any tips or suggestions on how to get the trigger mechanism to work well? I didn't get that far last time, but it looks like it might be a bit of a pain.

In Topic: Longshot Mag Combination

19 February 2007 - 01:56 PM

Sorry to keep asking dumb questions, but I've got another one. How the heck did you get the two halves apart? I unscrewed it, but it seems like the top halves are glued or clipped together somehow. I pulled pretty hard and even tried prying it open, but nothing besides breaking the damn thing seems like it's going to work.

In Topic: Guide To Barrel Material

19 February 2007 - 12:36 PM

What are the advantages/disadvantages I should know when choosing between brass and aluminum?

It seems that most people here like to use brass, but I'd like to know why. I'm placing a large order on McMaster and aluminum is a heck of a lot cheaper. I'm not opposed to ordering the brass if it's significantly better in terms of performance, but I can think of a lot of things that I'd like to do with the money I'd save on the aluminum.

In Topic: Longshot Mag Combination

16 February 2007 - 11:58 PM

Cool. That shouldn't be too much of a problem for me at all. Thanks.

In Topic: Longshot Mag Combination

16 February 2007 - 11:17 PM

I've got one of those. You think it'll work? I don't have an easily accessible table saw.