Jump to content


Member Since 14 Dec 2008
Offline Last Active Mar 17 2010 07:54 PM

Topics I've Started

Diplomat Update

22 April 2009 - 04:11 PM

Hey guys ive gone ahead and moved on to better modding materials since you last saw the Diplomat. So now i've put much more time into these mods to make my nightfinder the best it can be. Right now with its current mods and bands it gets 60ft flat and 65ft angled. These mods include:

A.R Removal
Cpvc Couplered
Double O-Rings
Silenced with FBR
Stretched Spring

Here are some pictures of my gun
Posted Image

Other Side
Posted Image

Nightfinder Question

21 April 2009 - 02:04 PM

Hey guys i was rummaging through my old nerf stuff and found a tech target spring and was wondering would it work in a nightfinder with a original nightfinder spring in it also or will it break my gun? Feedback would be nice and can i add a tech target o ring to it because when i put it on with the nightfinder o ring it was a tad too big.

Maverick Breakthrough?

11 April 2009 - 04:07 PM

Hey guys i was bored one day and thought of if you epoxied a maverick to another gun can it be cocked by pushing the maverick foward. Here i have some poorly drawn pictures of what my idea is on a longshot.

This is it before cocked
Posted Image

After the maverick is pushed foward and cocked
Posted Image

Pvc Question

05 April 2009 - 07:27 PM

hey guys i recently was browsing home depot and saw that there pvc was 1.20$ for 10ft so i decided to buy some 1/2 inch and a half inch coupler so i was wondering if i bought the right stuff to do a pvc coupler mod on the nightfinder. Ive never screwed around with pvc or cpvc before and was wondering if i should have bought pvc or cpvc for this mod and if i bought the right size coupler and pipe. I was also thinking of making a speedloader also, so what would i need for that too. Right now i have the 10ft pipe in 5ft halves and wondering what to do. So if someone could fill me in on what i need and if i wasted money on pvc when i should have got cpvc. I'm not so worried about the coupler because it was 21 cents but if you know what i need to do a coupler mod on a nightfinder and make a speedloader please fill me in. :D

Paper Speedloaders

30 January 2009 - 06:55 PM

Hey guys this is my first write up and this is for people who dont have cpvc or petg on them or is just plain cheap like me. So the things you need are

1 Piece of paper
Tape (gafting tape recommended)

1. Alright so first cut 2 pieces of paper any length you want like so
Posted Image
2. Roll it up to the size of your barrel of choice like so and then tape the paper so it stays together and make sure to make the inside of the paper to be as hollow as possible.
Posted Image
3.Repeat steps 1 & 2 and then tape them together and there you go a paper speedloader.
Posted Image